Received empty audio data array (V1 Firmware Build)

[felyu]

Hello everyone,

I've successfully installed the V1 Release of the Firmware on the chip, and the device is recognized with the LED blinking as expected.

However, upon testing it using either the Python script on my laptop or the online firmware tester tool (Chrome), I encountered the following errors:

Python Script Logs:

Recording audio...
Recording stopped
0
Warning: Received empty audio data array.

Online Firmware Tester Tool Logs:

Starting Bluetooth...
Bluetooth started: started
Opening device...
Device opened: Friend (zkSRZ5uwGXfndd3Ka6qSIQ==)
Service: 19b10000-e8f2-537e-4f6c-d104768a1214
- Characteristic: 19b10001-e8f2-537e-4f6c-d104768a1214
  - canRead: true
  - canWrite: false
  - canNotify: true
- Characteristic: 19b10002-e8f2-537e-4f6c-d104768a1214
  - canRead: true
  - canWrite: false
  - canNotify: false
Target protocol found: pcm-8
Waiting for data...
Total received: 0 bytes, speed: 0 bytes/sec, lost: 0 packets or 0 packets
Total frames: 0
Decoding...
Done!

Additional Information:

• MacBook Air Early 2015 running Monterey 12.6
• I've attempted to reinstall the software multiple times without success.

I would greatly appreciate any assistance in resolving these issues. Thank you in advance!

[after-ephemera]

@felyu can you confirm whether this is still a problem?

[felyu]

@felyu can you confirm whether this is still a problem?

I've bought a the latest Macbook Air M3 and it's now working!!!