server.c

/*
 * Copyright (c) 2009-2016, Salvatore Sanfilippo <antirez at gmail dot com>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *   * Redistributions of source code must retain the above copyright notice,
 *     this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *   * Neither the name of Redis nor the names of its contributors may be used
 *     to endorse or promote products derived from this software without
 *     specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include "server.h"
#include "monotonic.h"
#include "cluster.h"
#include "slowlog.h"
#include "bio.h"
#include "latency.h"
#include "atomicvar.h"
#include "mt19937-64.h"
#include "functions.h"
#include "hdr_histogram.h"
#include "syscheck.h"
#include "threads_mngr.h"
#include "fmtargs.h"

#include <time.h>
#include <signal.h>
#include <sys/wait.h>
#include <errno.h>
#include <ctype.h>
#include <stdarg.h>
#include <arpa/inet.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/file.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/uio.h>
#include <sys/un.h>
#include <limits.h>
#include <float.h>
#include <math.h>
#include <sys/utsname.h>
#include <locale.h>
#include <sys/socket.h>

#ifdef __linux__
#include <sys/mman.h>
#endif

#if defined(HAVE_SYSCTL_KIPC_SOMAXCONN) || defined(HAVE_SYSCTL_KERN_SOMAXCONN)
#include <sys/sysctl.h>
#endif

#ifdef __GNUC__
#define GNUC_VERSION_STR STRINGIFY(__GNUC__) "." STRINGIFY(__GNUC_MINOR__) "." STRINGIFY(__GNUC_PATCHLEVEL__)
#else
#define GNUC_VERSION_STR "0.0.0"
#endif

/* Our shared "common" objects */

struct sharedObjectsStruct shared;

/* Global vars that are actually used as constants. The following double
 * values are used for double on-disk serialization, and are initialized
 * at runtime to avoid strange compiler optimizations. */

double R_Zero, R_PosInf, R_NegInf, R_Nan;

/*================================= Globals ================================= */

/* Global vars */
struct valkeyServer server; /* Server global state */

/*============================ Internal prototypes ========================== */

static inline int isShutdownInitiated(void);
int isReadyToShutdown(void);
int finishShutdown(void);
const char *replstateToString(int replstate);

/*============================ Utility functions ============================ */

/* This macro tells if we are in the context of loading an AOF. */
#define isAOFLoadingContext() \
    ((server.current_client && server.current_client->id == CLIENT_ID_AOF) ? 1 : 0)

/* We use a private localtime implementation which is fork-safe. The logging
 * function of the server may be called from other threads. */
void nolocks_localtime(struct tm *tmp, time_t t, time_t tz, int dst);

/* Low level logging. To use only for very big messages, otherwise
 * serverLog() is to prefer. */
void serverLogRaw(int level, const char *msg) {
    const int syslogLevelMap[] = { LOG_DEBUG, LOG_INFO, LOG_NOTICE, LOG_WARNING };
    const char *c = ".-*#";
    FILE *fp;
    char buf[64];
    int rawmode = (level & LL_RAW);
    int log_to_stdout = server.logfile[0] == '\0';

    level &= 0xff; /* clear flags */
    if (level < server.verbosity) return;

    fp = log_to_stdout ? stdout : fopen(server.logfile,"a");
    if (!fp) return;

    if (rawmode) {
        fprintf(fp,"%s",msg);
    } else {
        int off;
        struct timeval tv;
        int role_char;
        pid_t pid = getpid();

        gettimeofday(&tv,NULL);
        struct tm tm;
        nolocks_localtime(&tm,tv.tv_sec,server.timezone,server.daylight_active);
        off = strftime(buf,sizeof(buf),"%d %b %Y %H:%M:%S.",&tm);
        snprintf(buf+off,sizeof(buf)-off,"%03d",(int)tv.tv_usec/1000);
        if (server.sentinel_mode) {
            role_char = 'X'; /* Sentinel. */
        } else if (pid != server.pid) {
            role_char = 'C'; /* RDB / AOF writing child. */
        } else {
            role_char = (server.masterhost ? 'S':'M'); /* Slave or Master. */
        }
        fprintf(fp,"%d:%c %s %c %s\n",
            (int)getpid(),role_char, buf,c[level],msg);
    }
    fflush(fp);

    if (!log_to_stdout) fclose(fp);
    if (server.syslog_enabled) syslog(syslogLevelMap[level], "%s", msg);
}

/* Like serverLogRaw() but with printf-alike support. This is the function that
 * is used across the code. The raw version is only used in order to dump
 * the INFO output on crash. */
void _serverLog(int level, const char *fmt, ...) {
    va_list ap;
    char msg[LOG_MAX_LEN];

    va_start(ap, fmt);
    vsnprintf(msg, sizeof(msg), fmt, ap);
    va_end(ap);

    serverLogRaw(level,msg);
}

/* Low level logging from signal handler. Should be used with pre-formatted strings. 
   See serverLogFromHandler. */
void serverLogRawFromHandler(int level, const char *msg) {
    int fd;
    int log_to_stdout = server.logfile[0] == '\0';
    char buf[64];

    if ((level&0xff) < server.verbosity || (log_to_stdout && server.daemonize))
        return;
    fd = log_to_stdout ? STDOUT_FILENO :
                         open(server.logfile, O_APPEND|O_CREAT|O_WRONLY, 0644);
    if (fd == -1) return;
    if (level & LL_RAW) {
        if (write(fd,msg,strlen(msg)) == -1) goto err;
    }
    else {
        ll2string(buf,sizeof(buf),getpid());
        if (write(fd,buf,strlen(buf)) == -1) goto err;
        if (write(fd,":signal-handler (",17) == -1) goto err;
        ll2string(buf,sizeof(buf),time(NULL));
        if (write(fd,buf,strlen(buf)) == -1) goto err;
        if (write(fd,") ",2) == -1) goto err;
        if (write(fd,msg,strlen(msg)) == -1) goto err;
        if (write(fd,"\n",1) == -1) goto err;
    }
err:
    if (!log_to_stdout) close(fd);
}

/* An async-signal-safe version of serverLog. if LL_RAW is not included in level flags,
 * The message format is: <pid>:signal-handler (<time>) <msg> \n
 * with LL_RAW flag only the msg is printed (with no new line at the end)
 *
 * We actually use this only for signals that are not fatal from the point
 * of view of the server. Signals that are going to kill the server anyway and
 * where we need printf-alike features are served by serverLog(). */
void serverLogFromHandler(int level, const char *fmt, ...) {
    va_list ap;
    char msg[LOG_MAX_LEN];

    va_start(ap, fmt);
    vsnprintf_async_signal_safe(msg, sizeof(msg), fmt, ap);
    va_end(ap);

    serverLogRawFromHandler(level, msg);
}

/* Return the UNIX time in microseconds */
long long ustime(void) {
    struct timeval tv;
    long long ust;

    gettimeofday(&tv, NULL);
    ust = ((long long)tv.tv_sec)*1000000;
    ust += tv.tv_usec;
    return ust;
}

/* Return the UNIX time in milliseconds */
mstime_t mstime(void) {
    return ustime()/1000;
}

/* Return the command time snapshot in milliseconds.
 * The time the command started is the logical time it runs,
 * and all the time readings during the execution time should
 * reflect the same time.
 * More details can be found in the comments below. */
mstime_t commandTimeSnapshot(void) {
    /* When we are in the middle of a command execution, we want to use a
     * reference time that does not change: in that case we just use the
     * cached time, that we update before each call in the call() function.
     * This way we avoid that commands such as RPOPLPUSH or similar, that
     * may re-open the same key multiple times, can invalidate an already
     * open object in a next call, if the next call will see the key expired,
     * while the first did not.
     * This is specifically important in the context of scripts, where we
     * pretend that time freezes. This way a key can expire only the first time
     * it is accessed and not in the middle of the script execution, making
     * propagation to slaves / AOF consistent. See issue #1525 for more info.
     * Note that we cannot use the cached server.mstime because it can change
     * in processEventsWhileBlocked etc. */
    return server.cmd_time_snapshot;
}

/* After an RDB dump or AOF rewrite we exit from children using _exit() instead of
 * exit(), because the latter may interact with the same file objects used by
 * the parent process. However if we are testing the coverage normal exit() is
 * used in order to obtain the right coverage information. */
void exitFromChild(int retcode) {
#ifdef COVERAGE_TEST
    exit(retcode);
#else
    _exit(retcode);
#endif
}

/*====================== Hash table type implementation  ==================== */

/* This is a hash table type that uses the SDS dynamic strings library as
 * keys and Objects as values (Objects can hold SDS strings,
 * lists, sets). */

void dictVanillaFree(dict *d, void *val)
{
    UNUSED(d);
    zfree(val);
}

void dictListDestructor(dict *d, void *val)
{
    UNUSED(d);
    listRelease((list*)val);
}

void dictDictDestructor(dict *d, void *val)
{
    UNUSED(d);
    dictRelease((dict*)val);
}

int dictSdsKeyCompare(dict *d, const void *key1,
        const void *key2)
{
    int l1,l2;
    UNUSED(d);

    l1 = sdslen((sds)key1);
    l2 = sdslen((sds)key2);
    if (l1 != l2) return 0;
    return memcmp(key1, key2, l1) == 0;
}

/* A case insensitive version used for the command lookup table and other
 * places where case insensitive non binary-safe comparison is needed. */
int dictSdsKeyCaseCompare(dict *d, const void *key1,
        const void *key2)
{
    UNUSED(d);
    return strcasecmp(key1, key2) == 0;
}

void dictObjectDestructor(dict *d, void *val)
{
    UNUSED(d);
    if (val == NULL) return; /* Lazy freeing will set value to NULL. */
    decrRefCount(val);
}

void dictSdsDestructor(dict *d, void *val)
{
    UNUSED(d);
    sdsfree(val);
}

void *dictSdsDup(dict *d, const void *key) {
    UNUSED(d);
    return sdsdup((const sds) key);
}

int dictObjKeyCompare(dict *d, const void *key1,
        const void *key2)
{
    const robj *o1 = key1, *o2 = key2;
    return dictSdsKeyCompare(d, o1->ptr,o2->ptr);
}

uint64_t dictObjHash(const void *key) {
    const robj *o = key;
    return dictGenHashFunction(o->ptr, sdslen((sds)o->ptr));
}

uint64_t dictSdsHash(const void *key) {
    return dictGenHashFunction((unsigned char*)key, sdslen((char*)key));
}

uint64_t dictSdsCaseHash(const void *key) {
    return dictGenCaseHashFunction((unsigned char*)key, sdslen((char*)key));
}

/* Dict hash function for null terminated string */
uint64_t dictCStrHash(const void *key) {
    return dictGenHashFunction((unsigned char*)key, strlen((char*)key));
}

/* Dict hash function for null terminated string */
uint64_t dictCStrCaseHash(const void *key) {
    return dictGenCaseHashFunction((unsigned char*)key, strlen((char*)key));
}

/* Dict hash function for client */
uint64_t dictClientHash(const void *key) {
    return ((client *)key)->id;
}

/* Dict compare function for client */
int dictClientKeyCompare(dict *d, const void *key1, const void *key2) {
    UNUSED(d);
    return ((client *)key1)->id == ((client *)key2)->id;
}

/* Dict compare function for null terminated string */
int dictCStrKeyCompare(dict *d, const void *key1, const void *key2) {
    int l1,l2;
    UNUSED(d);

    l1 = strlen((char*)key1);
    l2 = strlen((char*)key2);
    if (l1 != l2) return 0;
    return memcmp(key1, key2, l1) == 0;
}

/* Dict case insensitive compare function for null terminated string */
int dictCStrKeyCaseCompare(dict *d, const void *key1, const void *key2) {
    UNUSED(d);
    return strcasecmp(key1, key2) == 0;
}

int dictEncObjKeyCompare(dict *d, const void *key1, const void *key2)
{
    robj *o1 = (robj*) key1, *o2 = (robj*) key2;
    int cmp;

    if (o1->encoding == OBJ_ENCODING_INT &&
        o2->encoding == OBJ_ENCODING_INT)
            return o1->ptr == o2->ptr;

    /* Due to OBJ_STATIC_REFCOUNT, we avoid calling getDecodedObject() without
     * good reasons, because it would incrRefCount() the object, which
     * is invalid. So we check to make sure dictFind() works with static
     * objects as well. */
    if (o1->refcount != OBJ_STATIC_REFCOUNT) o1 = getDecodedObject(o1);
    if (o2->refcount != OBJ_STATIC_REFCOUNT) o2 = getDecodedObject(o2);
    cmp = dictSdsKeyCompare(d,o1->ptr,o2->ptr);
    if (o1->refcount != OBJ_STATIC_REFCOUNT) decrRefCount(o1);
    if (o2->refcount != OBJ_STATIC_REFCOUNT) decrRefCount(o2);
    return cmp;
}

uint64_t dictEncObjHash(const void *key) {
    robj *o = (robj*) key;

    if (sdsEncodedObject(o)) {
        return dictGenHashFunction(o->ptr, sdslen((sds)o->ptr));
    } else if (o->encoding == OBJ_ENCODING_INT) {
        char buf[32];
        int len;

        len = ll2string(buf,32,(long)o->ptr);
        return dictGenHashFunction((unsigned char*)buf, len);
    } else {
        serverPanic("Unknown string encoding");
    }
}

/* Return 1 if currently we allow dict to expand. Dict may allocate huge
 * memory to contain hash buckets when dict expands, that may lead the server to
 * reject user's requests or evict some keys, we can stop dict to expand
 * provisionally if used memory will be over maxmemory after dict expands,
 * but to guarantee the performance of the server, we still allow dict to expand
 * if dict load factor exceeds HASHTABLE_MAX_LOAD_FACTOR. */
int dictResizeAllowed(size_t moreMem, double usedRatio) {
    /* for debug purposes: dict is not allowed to be resized. */
    if (!server.dict_resizing) return 0;

    if (usedRatio <= HASHTABLE_MAX_LOAD_FACTOR) {
        return !overMaxmemoryAfterAlloc(moreMem);
    } else {
        return 1;
    }
}

/* Generic hash table type where keys are Objects, Values
 * dummy pointers. */
dictType objectKeyPointerValueDictType = {
    dictEncObjHash,            /* hash function */
    NULL,                      /* key dup */
    NULL,                      /* val dup */
    dictEncObjKeyCompare,      /* key compare */
    dictObjectDestructor,      /* key destructor */
    NULL,                      /* val destructor */
    NULL                       /* allow to expand */
};

/* Like objectKeyPointerValueDictType(), but values can be destroyed, if
 * not NULL, calling zfree(). */
dictType objectKeyHeapPointerValueDictType = {
    dictEncObjHash,            /* hash function */
    NULL,                      /* key dup */
    NULL,                      /* val dup */
    dictEncObjKeyCompare,      /* key compare */
    dictObjectDestructor,      /* key destructor */
    dictVanillaFree,           /* val destructor */
    NULL                       /* allow to expand */
};

/* Set dictionary type. Keys are SDS strings, values are not used. */
dictType setDictType = {
    dictSdsHash,               /* hash function */
    NULL,                      /* key dup */
    NULL,                      /* val dup */
    dictSdsKeyCompare,         /* key compare */
    dictSdsDestructor,         /* key destructor */
    NULL,                      /* val destructor */
    NULL,                      /* allow to expand */
    .no_value = 1,             /* no values in this dict */
    .keys_are_odd = 1          /* an SDS string is always an odd pointer */
};

/* Sorted sets hash (note: a skiplist is used in addition to the hash table) */
dictType zsetDictType = {
    dictSdsHash,               /* hash function */
    NULL,                      /* key dup */
    NULL,                      /* val dup */
    dictSdsKeyCompare,         /* key compare */
    NULL,                      /* Note: SDS string shared & freed by skiplist */
    NULL,                      /* val destructor */
    NULL,                      /* allow to expand */
};

/* Db->dict, keys are sds strings, vals are Objects. */
dictType dbDictType = {
    dictSdsHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCompare,          /* key compare */
    dictSdsDestructor,          /* key destructor */
    dictObjectDestructor,       /* val destructor */
    dictResizeAllowed,          /* allow to resize */
};

/* Db->expires */
dictType dbExpiresDictType = {
    dictSdsHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCompare,          /* key compare */
    NULL,                       /* key destructor */
    NULL,                       /* val destructor */
    dictResizeAllowed,          /* allow to resize */
};

/* Command table. sds string -> command struct pointer. */
dictType commandTableDictType = {
    dictSdsCaseHash,            /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCaseCompare,      /* key compare */
    dictSdsDestructor,          /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Hash type hash table (note that small hashes are represented with listpacks) */
dictType hashDictType = {
    dictSdsHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCompare,          /* key compare */
    dictSdsDestructor,          /* key destructor */
    dictSdsDestructor,          /* val destructor */
    NULL,                       /* allow to expand */
};

/* Dict type without destructor */
dictType sdsReplyDictType = {
    dictSdsHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCompare,          /* key compare */
    NULL,                       /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Keylist hash table type has unencoded Objects as keys and
 * lists as values. It's used for blocking operations (BLPOP) and to
 * map swapped keys to a list of clients waiting for this keys to be loaded. */
dictType keylistDictType = {
    dictObjHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictObjKeyCompare,          /* key compare */
    dictObjectDestructor,       /* key destructor */
    dictListDestructor,         /* val destructor */
    NULL                        /* allow to expand */
};

/* KeyDict hash table type has unencoded Objects as keys and
 * dicts as values. It's used for PUBSUB command to track clients subscribing the channels. */
dictType objToDictDictType = {
    dictObjHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictObjKeyCompare,          /* key compare */
    dictObjectDestructor,       /* key destructor */
    dictDictDestructor,         /* val destructor */
    NULL                        /* allow to expand */
};

/* Modules system dictionary type. Keys are module name,
 * values are pointer to ValkeyModule struct. */
dictType modulesDictType = {
    dictSdsCaseHash,            /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCaseCompare,      /* key compare */
    dictSdsDestructor,          /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Migrate cache dict type. */
dictType migrateCacheDictType = {
    dictSdsHash,                /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCompare,          /* key compare */
    dictSdsDestructor,          /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Dict for for case-insensitive search using null terminated C strings.
 * The keys stored in dict are sds though. */
dictType stringSetDictType = {
    dictCStrCaseHash,           /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictCStrKeyCaseCompare,     /* key compare */
    dictSdsDestructor,          /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Dict for for case-insensitive search using null terminated C strings.
 * The key and value do not have a destructor. */
dictType externalStringType = {
    dictCStrCaseHash,           /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictCStrKeyCaseCompare,     /* key compare */
    NULL,                       /* key destructor */
    NULL,                       /* val destructor */
    NULL                        /* allow to expand */
};

/* Dict for case-insensitive search using sds objects with a zmalloc
 * allocated object as the value. */
dictType sdsHashDictType = {
    dictSdsCaseHash,            /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictSdsKeyCaseCompare,      /* key compare */
    dictSdsDestructor,          /* key destructor */
    dictVanillaFree,            /* val destructor */
    NULL                        /* allow to expand */
};

/* Client Set dictionary type. Keys are client, values are not used. */
dictType clientDictType = {
    dictClientHash,             /* hash function */
    NULL,                       /* key dup */
    NULL,                       /* val dup */
    dictClientKeyCompare,       /* key compare */
    .no_value = 1               /* no values in this dict */
};

/* This function is called once a background process of some kind terminates,
 * as we want to avoid resizing the hash tables when there is a child in order
 * to play well with copy-on-write (otherwise when a resize happens lots of
 * memory pages are copied). The goal of this function is to update the ability
 * for dict.c to resize or rehash the tables accordingly to the fact we have an
 * active fork child running. */
void updateDictResizePolicy(void) {
    if (server.in_fork_child != CHILD_TYPE_NONE)
        dictSetResizeEnabled(DICT_RESIZE_FORBID);
    else if (hasActiveChildProcess())
        dictSetResizeEnabled(DICT_RESIZE_AVOID);
    else
        dictSetResizeEnabled(DICT_RESIZE_ENABLE);
}

const char *strChildType(int type) {
    switch(type) {
        case CHILD_TYPE_RDB: return "RDB";
        case CHILD_TYPE_AOF: return "AOF";
        case CHILD_TYPE_LDB: return "LDB";
        case CHILD_TYPE_MODULE: return "MODULE";
        default: return "Unknown";
    }
}

/* Return true if there are active children processes doing RDB saving,
 * AOF rewriting, or some side process spawned by a loaded module. */
int hasActiveChildProcess(void) {
    return server.child_pid != -1;
}

void resetChildState(void) {
    server.child_type = CHILD_TYPE_NONE;
    server.child_pid = -1;
    server.stat_current_cow_peak = 0;
    server.stat_current_cow_bytes = 0;
    server.stat_current_cow_updated = 0;
    server.stat_current_save_keys_processed = 0;
    server.stat_module_progress = 0;
    server.stat_current_save_keys_total = 0;
    updateDictResizePolicy();
    closeChildInfoPipe();
    moduleFireServerEvent(VALKEYMODULE_EVENT_FORK_CHILD,
                          VALKEYMODULE_SUBEVENT_FORK_CHILD_DIED,
                          NULL);
}

/* Return if child type is mutually exclusive with other fork children */
int isMutuallyExclusiveChildType(int type) {
    return type == CHILD_TYPE_RDB || type == CHILD_TYPE_AOF || type == CHILD_TYPE_MODULE;
}

/* Returns true when we're inside a long command that yielded to the event loop. */
int isInsideYieldingLongCommand(void) {
    return scriptIsTimedout() || server.busy_module_yield_flags;
}

/* Return true if this instance has persistence completely turned off:
 * both RDB and AOF are disabled. */
int allPersistenceDisabled(void) {
    return server.saveparamslen == 0 && server.aof_state == AOF_OFF;
}

/* ======================= Cron: called every 100 ms ======================== */

/* Add a sample to the instantaneous metric. This function computes the quotient
 * of the increment of value and base, which is useful to record operation count
 * per second, or the average time consumption of an operation.
 *
 * current_value - The dividend
 * current_base - The divisor
 * */
void trackInstantaneousMetric(int metric, long long current_value, long long current_base, long long factor) {
    if (server.inst_metric[metric].last_sample_base > 0) {
        long long base = current_base - server.inst_metric[metric].last_sample_base;
        long long value = current_value - server.inst_metric[metric].last_sample_value;
        long long avg = base > 0 ? (value * factor / base) : 0;
        server.inst_metric[metric].samples[server.inst_metric[metric].idx] = avg;
        server.inst_metric[metric].idx++;
        server.inst_metric[metric].idx %= STATS_METRIC_SAMPLES;
    }
    server.inst_metric[metric].last_sample_base = current_base;
    server.inst_metric[metric].last_sample_value = current_value;
}

/* Return the mean of all the samples. */
long long getInstantaneousMetric(int metric) {
    int j;
    long long sum = 0;

    for (j = 0; j < STATS_METRIC_SAMPLES; j++)
        sum += server.inst_metric[metric].samples[j];
    return sum / STATS_METRIC_SAMPLES;
}

/* The client query buffer is an sds.c string that can end with a lot of
 * free space not used, this function reclaims space if needed.
 *
 * The function always returns 0 as it never terminates the client. */
int clientsCronResizeQueryBuffer(client *c) {
    size_t querybuf_size = sdsalloc(c->querybuf);
    time_t idletime = server.unixtime - c->lastinteraction;

    /* Only resize the query buffer if the buffer is actually wasting at least a
     * few kbytes */
    if (sdsavail(c->querybuf) > 1024*4) {
        /* There are two conditions to resize the query buffer: */
        if (idletime > 2) {
            /* 1) Query is idle for a long time. */
            c->querybuf = sdsRemoveFreeSpace(c->querybuf, 1);
        } else if (querybuf_size > PROTO_RESIZE_THRESHOLD && querybuf_size/2 > c->querybuf_peak) {
            /* 2) Query buffer is too big for latest peak and is larger than
             *    resize threshold. Trim excess space but only up to a limit,
             *    not below the recent peak and current c->querybuf (which will
             *    be soon get used). If we're in the middle of a bulk then make
             *    sure not to resize to less than the bulk length. */
            size_t resize = sdslen(c->querybuf);
            if (resize < c->querybuf_peak) resize = c->querybuf_peak;
            if (c->bulklen != -1 && resize < (size_t)c->bulklen + 2) resize = c->bulklen + 2;
            c->querybuf = sdsResize(c->querybuf, resize, 1);
        }
    }

    /* Reset the peak again to capture the peak memory usage in the next
     * cycle. */
    c->querybuf_peak = sdslen(c->querybuf);
    /* We reset to either the current used, or currently processed bulk size,
     * which ever is bigger. */
    if (c->bulklen != -1 && (size_t)c->bulklen + 2 > c->querybuf_peak) c->querybuf_peak = c->bulklen + 2;
    return 0;
}

/* The client output buffer can be adjusted to better fit the memory requirements.
 *
 * the logic is:
 * in case the last observed peak size of the buffer equals the buffer size - we double the size
 * in case the last observed peak size of the buffer is less than half the buffer size - we shrink by half.
 * The buffer peak will be reset back to the buffer position every server.reply_buffer_peak_reset_time milliseconds
 * The function always returns 0 as it never terminates the client. */
int clientsCronResizeOutputBuffer(client *c, mstime_t now_ms) {

    size_t new_buffer_size = 0;
    char *oldbuf = NULL;
    const size_t buffer_target_shrink_size = c->buf_usable_size/2;
    const size_t buffer_target_expand_size = c->buf_usable_size*2;

    /* in case the resizing is disabled return immediately */
    if(!server.reply_buffer_resizing_enabled)
        return 0;

    if (buffer_target_shrink_size >= PROTO_REPLY_MIN_BYTES &&
        c->buf_peak < buffer_target_shrink_size )
    {
        new_buffer_size = max(PROTO_REPLY_MIN_BYTES,c->buf_peak+1);
        server.stat_reply_buffer_shrinks++;
    } else if (buffer_target_expand_size < PROTO_REPLY_CHUNK_BYTES*2 &&
        c->buf_peak == c->buf_usable_size)
    {
        new_buffer_size = min(PROTO_REPLY_CHUNK_BYTES,buffer_target_expand_size);
        server.stat_reply_buffer_expands++;
    }

    serverAssertWithInfo(c, NULL, (!new_buffer_size) || (new_buffer_size >= (size_t)c->bufpos));

    /* reset the peak value each server.reply_buffer_peak_reset_time seconds. in case the client will be idle
     * it will start to shrink.
     */
    if (server.reply_buffer_peak_reset_time >=0 &&
        now_ms - c->buf_peak_last_reset_time >= server.reply_buffer_peak_reset_time)
    {
        c->buf_peak = c->bufpos;
        c->buf_peak_last_reset_time = now_ms;
    }

    if (new_buffer_size) {
        oldbuf = c->buf;
        c->buf = zmalloc_usable(new_buffer_size, &c->buf_usable_size);
        memcpy(c->buf,oldbuf,c->bufpos);
        zfree(oldbuf);
    }
    return 0;
}

/* This function is used in order to track clients using the biggest amount
 * of memory in the latest few seconds. This way we can provide such information
 * in the INFO output (clients section), without having to do an O(N) scan for
 * all the clients.
 *
 * This is how it works. We have an array of CLIENTS_PEAK_MEM_USAGE_SLOTS slots
 * where we track, for each, the biggest client output and input buffers we
 * saw in that slot. Every slot corresponds to one of the latest seconds, since
 * the array is indexed by doing UNIXTIME % CLIENTS_PEAK_MEM_USAGE_SLOTS.
 *
 * When we want to know what was recently the peak memory usage, we just scan
 * such few slots searching for the maximum value. */
#define CLIENTS_PEAK_MEM_USAGE_SLOTS 8
size_t ClientsPeakMemInput[CLIENTS_PEAK_MEM_USAGE_SLOTS] = {0};
size_t ClientsPeakMemOutput[CLIENTS_PEAK_MEM_USAGE_SLOTS] = {0};

int clientsCronTrackExpansiveClients(client *c, int time_idx) {
    size_t in_usage = sdsZmallocSize(c->querybuf) + c->argv_len_sum +
	              (c->argv ? zmalloc_size(c->argv) : 0);
    size_t out_usage = getClientOutputBufferMemoryUsage(c);

    /* Track the biggest values observed so far in this slot. */
    if (in_usage > ClientsPeakMemInput[time_idx]) ClientsPeakMemInput[time_idx] = in_usage;
    if (out_usage > ClientsPeakMemOutput[time_idx]) ClientsPeakMemOutput[time_idx] = out_usage;

    return 0; /* This function never terminates the client. */
}

/* All normal clients are placed in one of the "mem usage buckets" according
 * to how much memory they currently use. We use this function to find the
 * appropriate bucket based on a given memory usage value. The algorithm simply
 * does a log2(mem) to ge the bucket. This means, for examples, that if a
 * client's memory usage doubles it's moved up to the next bucket, if it's
 * halved we move it down a bucket.
 * For more details see CLIENT_MEM_USAGE_BUCKETS documentation in server.h. */
static inline clientMemUsageBucket *getMemUsageBucket(size_t mem) {
    int size_in_bits = 8*(int)sizeof(mem);
    int clz = mem > 0 ? __builtin_clzl(mem) : size_in_bits;
    int bucket_idx = size_in_bits - clz;
    if (bucket_idx > CLIENT_MEM_USAGE_BUCKET_MAX_LOG)
        bucket_idx = CLIENT_MEM_USAGE_BUCKET_MAX_LOG;
    else if (bucket_idx < CLIENT_MEM_USAGE_BUCKET_MIN_LOG)
        bucket_idx = CLIENT_MEM_USAGE_BUCKET_MIN_LOG;
    bucket_idx -= CLIENT_MEM_USAGE_BUCKET_MIN_LOG;
    return &server.client_mem_usage_buckets[bucket_idx];
}

/*
 * This method updates the client memory usage and update the
 * server stats for client type.
 *
 * This method is called from the clientsCron to have updated
 * stats for non CLIENT_TYPE_NORMAL/PUBSUB clients to accurately
 * provide information around clients memory usage.
 *
 * It is also used in updateClientMemUsageAndBucket to have latest
 * client memory usage information to place it into appropriate client memory
 * usage bucket.
 */
void updateClientMemoryUsage(client *c) {
    serverAssert(c->conn);
    size_t mem = getClientMemoryUsage(c, NULL);
    int type = getClientType(c);
    /* Now that we have the memory used by the client, remove the old
     * value from the old category, and add it back. */
    server.stat_clients_type_memory[c->last_memory_type] -= c->last_memory_usage;
    server.stat_clients_type_memory[type] += mem;
    /* Remember what we added and where, to remove it next time. */
    c->last_memory_type = type;
    c->last_memory_usage = mem;
}

int clientEvictionAllowed(client *c) {
    if (server.maxmemory_clients == 0 || c->flags & CLIENT_NO_EVICT || !c->conn) {
        return 0;
    }
    int type = getClientType(c);
    return (type == CLIENT_TYPE_NORMAL || type == CLIENT_TYPE_PUBSUB);
}


/* This function is used to cleanup the client's previously tracked memory usage.
 * This is called during incremental client memory usage tracking as well as
 * used to reset when client to bucket allocation is not required when
 * client eviction is disabled.  */
void removeClientFromMemUsageBucket(client *c, int allow_eviction) {
    if (c->mem_usage_bucket) {
        c->mem_usage_bucket->mem_usage_sum -= c->last_memory_usage;
        /* If this client can't be evicted then remove it from the mem usage
         * buckets */
        if (!allow_eviction) {
            listDelNode(c->mem_usage_bucket->clients, c->mem_usage_bucket_node);
            c->mem_usage_bucket = NULL;
            c->mem_usage_bucket_node = NULL;
        }
    }
}

/* This is called only if explicit clients when something changed their buffers,
 * so we can track clients' memory and enforce clients' maxmemory in real time.
 *
 * This also adds the client to the correct memory usage bucket. Each bucket contains
 * all clients with roughly the same amount of memory. This way we group
 * together clients consuming about the same amount of memory and can quickly
 * free them in case we reach maxmemory-clients (client eviction).
 *
 * Note: This function filters clients of type no-evict, master or replica regardless
 * of whether the eviction is enabled or not, so the memory usage we get from these
 * types of clients via the INFO command may be out of date.
 *
 * returns 1 if client eviction for this client is allowed, 0 otherwise.
 */
int updateClientMemUsageAndBucket(client *c) {
    serverAssert(io_threads_op == IO_THREADS_OP_IDLE && c->conn);
    int allow_eviction = clientEvictionAllowed(c);
    removeClientFromMemUsageBucket(c, allow_eviction);

    if (!allow_eviction) {
        return 0;
    }

    /* Update client memory usage. */
    updateClientMemoryUsage(c);

    /* Update the client in the mem usage buckets */
    clientMemUsageBucket *bucket = getMemUsageBucket(c->last_memory_usage);
    bucket->mem_usage_sum += c->last_memory_usage;
    if (bucket != c->mem_usage_bucket) {
        if (c->mem_usage_bucket)
            listDelNode(c->mem_usage_bucket->clients,
                        c->mem_usage_bucket_node);
        c->mem_usage_bucket = bucket;
        listAddNodeTail(bucket->clients, c);
        c->mem_usage_bucket_node = listLast(bucket->clients);
    }
    return 1;
}

/* Return the max samples in the memory usage of clients tracked by
 * the function clientsCronTrackExpansiveClients(). */
void getExpansiveClientsInfo(size_t *in_usage, size_t *out_usage) {
    size_t i = 0, o = 0;
    for (int j = 0; j < CLIENTS_PEAK_MEM_USAGE_SLOTS; j++) {
        if (ClientsPeakMemInput[j] > i) i = ClientsPeakMemInput[j];
        if (ClientsPeakMemOutput[j] > o) o = ClientsPeakMemOutput[j];
    }
    *in_usage = i;
    *out_usage = o;
}

/* This function is called by serverCron() and is used in order to perform
 * operations on clients that are important to perform constantly. For instance
 * we use this function in order to disconnect clients after a timeout, including
 * clients blocked in some blocking command with a non-zero timeout.
 *
 * The function makes some effort to process all the clients every second, even
 * if this cannot be strictly guaranteed, since serverCron() may be called with
 * an actual frequency lower than server.hz in case of latency events like slow
 * commands.
 *
 * It is very important for this function, and the functions it calls, to be
 * very fast: sometimes the server has tens of hundreds of connected clients, and the
 * default server.hz value is 10, so sometimes here we need to process thousands
 * of clients per second, turning this function into a source of latency.
 */
#define CLIENTS_CRON_MIN_ITERATIONS 5
void clientsCron(void) {
    /* Try to process at least numclients/server.hz of clients
     * per call. Since normally (if there are no big latency events) this
     * function is called server.hz times per second, in the average case we
     * process all the clients in 1 second. */
    int numclients = listLength(server.clients);
    int iterations = numclients/server.hz;
    mstime_t now = mstime();

    /* Process at least a few clients while we are at it, even if we need
     * to process less than CLIENTS_CRON_MIN_ITERATIONS to meet our contract
     * of processing each client once per second. */
    if (iterations < CLIENTS_CRON_MIN_ITERATIONS)
        iterations = (numclients < CLIENTS_CRON_MIN_ITERATIONS) ?
                     numclients : CLIENTS_CRON_MIN_ITERATIONS;


    int curr_peak_mem_usage_slot = server.unixtime % CLIENTS_PEAK_MEM_USAGE_SLOTS;
    /* Always zero the next sample, so that when we switch to that second, we'll
     * only register samples that are greater in that second without considering
     * the history of such slot.
     *
     * Note: our index may jump to any random position if serverCron() is not
     * called for some reason with the normal frequency, for instance because
     * some slow command is called taking multiple seconds to execute. In that
     * case our array may end containing data which is potentially older
     * than CLIENTS_PEAK_MEM_USAGE_SLOTS seconds: however this is not a problem
     * since here we want just to track if "recently" there were very expansive
     * clients from the POV of memory usage. */
    int zeroidx = (curr_peak_mem_usage_slot+1) % CLIENTS_PEAK_MEM_USAGE_SLOTS;
    ClientsPeakMemInput[zeroidx] = 0;
    ClientsPeakMemOutput[zeroidx] = 0;


    while(listLength(server.clients) && iterations--) {
        client *c;
        listNode *head;

        /* Take the current head, process, and then rotate the head to tail.
         * This way we can fairly iterate all clients step by step. */
        head = listFirst(server.clients);
        c = listNodeValue(head);
        listRotateHeadToTail(server.clients);
        /* The following functions do different service checks on the client.
         * The protocol is that they return non-zero if the client was
         * terminated. */
        if (clientsCronHandleTimeout(c,now)) continue;
        if (clientsCronResizeQueryBuffer(c)) continue;
        if (clientsCronResizeOutputBuffer(c,now)) continue;

        if (clientsCronTrackExpansiveClients(c, curr_peak_mem_usage_slot)) continue;

        /* Iterating all the clients in getMemoryOverheadData() is too slow and
         * in turn would make the INFO command too slow. So we perform this
         * computation incrementally and track the (not instantaneous but updated
         * to the second) total memory used by clients using clientsCron() in
         * a more incremental way (depending on server.hz).
         * If client eviction is enabled, update the bucket as well. */
        if (!updateClientMemUsageAndBucket(c))
            updateClientMemoryUsage(c);

        if (closeClientOnOutputBufferLimitReached(c, 0)) continue;
    }
}

/* This function handles 'background' operations we are required to do
 * incrementally in the databases, such as active key expiring, resizing,
 * rehashing. */
void databasesCron(void) {
    /* Expire keys by random sampling. Not required for slaves
     * as master will synthesize DELs for us. */
    if (server.active_expire_enabled) {
        if (iAmMaster()) {
            activeExpireCycle(ACTIVE_EXPIRE_CYCLE_SLOW);
        } else {
            expireSlaveKeys();
        }
    }

    /* Defrag keys gradually. */
    activeDefragCycle();

    /* Perform hash tables rehashing if needed, but only if there are no
     * other processes saving the DB on disk. Otherwise rehashing is bad
     * as will cause a lot of copy-on-write of memory pages. */
    if (!hasActiveChildProcess()) {
        /* We use global counters so if we stop the computation at a given
         * DB we'll be able to start from the successive in the next
         * cron loop iteration. */
        static unsigned int resize_db = 0;
        static unsigned int rehash_db = 0;
        int dbs_per_call = CRON_DBS_PER_CALL;
        int j;

        /* Don't test more DBs than we have. */
        if (dbs_per_call > server.dbnum) dbs_per_call = server.dbnum;

        for (j = 0; j < dbs_per_call; j++) {
            serverDb *db = &server.db[resize_db % server.dbnum];
            kvstoreTryResizeDicts(db->keys, CRON_DICTS_PER_DB);
            kvstoreTryResizeDicts(db->expires, CRON_DICTS_PER_DB);
            resize_db++;
        }

        /* Rehash */
        if (server.activerehashing) {
            uint64_t elapsed_us = 0;
            for (j = 0; j < dbs_per_call; j++) {
                serverDb *db = &server.db[rehash_db % server.dbnum];
                elapsed_us += kvstoreIncrementallyRehash(db->keys, INCREMENTAL_REHASHING_THRESHOLD_US - elapsed_us);
                if (elapsed_us >= INCREMENTAL_REHASHING_THRESHOLD_US)
                    break;
                elapsed_us += kvstoreIncrementallyRehash(db->expires, INCREMENTAL_REHASHING_THRESHOLD_US - elapsed_us);
                if (elapsed_us >= INCREMENTAL_REHASHING_THRESHOLD_US)
                    break;
                rehash_db++;
            }
        }
    }
}

static inline void updateCachedTimeWithUs(int update_daylight_info, const long long ustime) {
    server.ustime = ustime;
    server.mstime = server.ustime / 1000;
    time_t unixtime = server.mstime / 1000;
    atomicSet(server.unixtime, unixtime);

    /* To get information about daylight saving time, we need to call
     * localtime_r and cache the result. However calling localtime_r in this
     * context is safe since we will never fork() while here, in the main
     * thread. The logging function will call a thread safe version of
     * localtime that has no locks. */
    if (update_daylight_info) {
        struct tm tm;
        time_t ut = server.unixtime;
        localtime_r(&ut,&tm);
        server.daylight_active = tm.tm_isdst;
    }
}

/* We take a cached value of the unix time in the global state because with
 * virtual memory and aging there is to store the current time in objects at
 * every object access, and accuracy is not needed. To access a global var is
 * a lot faster than calling time(NULL).
 *
 * This function should be fast because it is called at every command execution
 * in call(), so it is possible to decide if to update the daylight saving
 * info or not using the 'update_daylight_info' argument. Normally we update
 * such info only when calling this function from serverCron() but not when
 * calling it from call(). */
void updateCachedTime(int update_daylight_info) {
    const long long us = ustime();
    updateCachedTimeWithUs(update_daylight_info, us);
}

/* Performing required operations in order to enter an execution unit.
 * In general, if we are already inside an execution unit then there is nothing to do,
 * otherwise we need to update cache times so the same cached time will be used all over
 * the execution unit.
 * update_cached_time - if 0, will not update the cached time even if required.
 * us - if not zero, use this time for cached time, otherwise get current time. */
void enterExecutionUnit(int update_cached_time, long long us) {
    if (server.execution_nesting++ == 0 && update_cached_time) {
        if (us == 0) {
            us = ustime();
        }
        updateCachedTimeWithUs(0, us);
        server.cmd_time_snapshot = server.mstime;
    }
}

void exitExecutionUnit(void) {
    --server.execution_nesting;
}

void checkChildrenDone(void) {
    int statloc = 0;
    pid_t pid;

    if ((pid = waitpid(-1, &statloc, WNOHANG)) != 0) {
        int exitcode = WIFEXITED(statloc) ? WEXITSTATUS(statloc) : -1;
        int bysignal = 0;

        if (WIFSIGNALED(statloc)) bysignal = WTERMSIG(statloc);

        /* sigKillChildHandler catches the signal and calls exit(), but we
         * must make sure not to flag lastbgsave_status, etc incorrectly.
         * We could directly terminate the child process via SIGUSR1
         * without handling it */
        if (exitcode == SERVER_CHILD_NOERROR_RETVAL) {
            bysignal = SIGUSR1;
            exitcode = 1;
        }

        if (pid == -1) {
            serverLog(LL_WARNING,"waitpid() returned an error: %s. "
                "child_type: %s, child_pid = %d",
                strerror(errno),
                strChildType(server.child_type),
                (int) server.child_pid);
        } else if (pid == server.child_pid) {
            if (server.child_type == CHILD_TYPE_RDB) {
                backgroundSaveDoneHandler(exitcode, bysignal);
            } else if (server.child_type == CHILD_TYPE_AOF) {
                backgroundRewriteDoneHandler(exitcode, bysignal);
            } else if (server.child_type == CHILD_TYPE_MODULE) {
                ModuleForkDoneHandler(exitcode, bysignal);
            } else {
                serverPanic("Unknown child type %d for child pid %d", server.child_type, server.child_pid);
                exit(1);
            }
            if (!bysignal && exitcode == 0) receiveChildInfo();
            resetChildState();
        } else {
            if (!ldbRemoveChild(pid)) {
                serverLog(LL_WARNING,
                          "Warning, detected child with unmatched pid: %ld",
                          (long) pid);
            }
        }

        /* start any pending forks immediately. */
        replicationStartPendingFork();
    }
}

/* Called from serverCron and cronUpdateMemoryStats to update cached memory metrics. */
void cronUpdateMemoryStats(void) {
    /* Record the max memory used since the server was started. */
    if (zmalloc_used_memory() > server.stat_peak_memory)
        server.stat_peak_memory = zmalloc_used_memory();

    run_with_period(100) {
        /* Sample the RSS and other metrics here since this is a relatively slow call.
         * We must sample the zmalloc_used at the same time we take the rss, otherwise
         * the frag ratio calculate may be off (ratio of two samples at different times) */
        server.cron_malloc_stats.process_rss = zmalloc_get_rss();
        server.cron_malloc_stats.zmalloc_used = zmalloc_used_memory();
        /* Sampling the allocator info can be slow too.
         * The fragmentation ratio it'll show is potentially more accurate
         * it excludes other RSS pages such as: shared libraries, LUA and other non-zmalloc
         * allocations, and allocator reserved pages that can be pursed (all not actual frag) */
        zmalloc_get_allocator_info(&server.cron_malloc_stats.allocator_allocated,
                                   &server.cron_malloc_stats.allocator_active,
                                   &server.cron_malloc_stats.allocator_resident,
                                   NULL,
                                   &server.cron_malloc_stats.allocator_muzzy,
                                   &server.cron_malloc_stats.allocator_frag_smallbins_bytes);
        /* in case the allocator isn't providing these stats, fake them so that
         * fragmentation info still shows some (inaccurate metrics) */
        if (!server.cron_malloc_stats.allocator_resident) {
            /* LUA memory isn't part of zmalloc_used, but it is part of the process RSS,
             * so we must deduct it in order to be able to calculate correct
             * "allocator fragmentation" ratio */
            size_t lua_memory = evalMemory();
            server.cron_malloc_stats.allocator_resident = server.cron_malloc_stats.process_rss - lua_memory;
        }
        if (!server.cron_malloc_stats.allocator_active)
            server.cron_malloc_stats.allocator_active = server.cron_malloc_stats.allocator_resident;
        if (!server.cron_malloc_stats.allocator_allocated)
            server.cron_malloc_stats.allocator_allocated = server.cron_malloc_stats.zmalloc_used;
    }
}

/* This is our timer interrupt, called server.hz times per second.
 * Here is where we do a number of things that need to be done asynchronously.
 * For instance:
 *
 * - Active expired keys collection (it is also performed in a lazy way on
 *   lookup).
 * - Software watchdog.
 * - Update some statistic.
 * - Incremental rehashing of the DBs hash tables.
 * - Triggering BGSAVE / AOF rewrite, and handling of terminated children.
 * - Clients timeout of different kinds.
 * - Replication reconnection.
 * - Many more...
 *
 * Everything directly called here will be called server.hz times per second,
 * so in order to throttle execution of things we want to do less frequently
 * a macro is used: run_with_period(milliseconds) { .... }
 */

int serverCron(struct aeEventLoop *eventLoop, long long id, void *clientData) {
    int j;
    UNUSED(eventLoop);
    UNUSED(id);
    UNUSED(clientData);

    /* Software watchdog: deliver the SIGALRM that will reach the signal
     * handler if we don't return here fast enough. */
    if (server.watchdog_period) watchdogScheduleSignal(server.watchdog_period);

    server.hz = server.config_hz;
    /* Adapt the server.hz value to the number of configured clients. If we have
     * many clients, we want to call serverCron() with an higher frequency. */
    if (server.dynamic_hz) {
        while (listLength(server.clients) / server.hz >
               MAX_CLIENTS_PER_CLOCK_TICK)
        {
            server.hz *= 2;
            if (server.hz > CONFIG_MAX_HZ) {
                server.hz = CONFIG_MAX_HZ;
                break;
            }
        }
    }

    /* for debug purposes: skip actual cron work if pause_cron is on */
    if (server.pause_cron) return 1000/server.hz;

    monotime cron_start = getMonotonicUs();

    run_with_period(100) {
        long long stat_net_input_bytes, stat_net_output_bytes;
        long long stat_net_repl_input_bytes, stat_net_repl_output_bytes;
        atomicGet(server.stat_net_input_bytes, stat_net_input_bytes);
        atomicGet(server.stat_net_output_bytes, stat_net_output_bytes);
        atomicGet(server.stat_net_repl_input_bytes, stat_net_repl_input_bytes);
        atomicGet(server.stat_net_repl_output_bytes, stat_net_repl_output_bytes);
        monotime current_time = getMonotonicUs();
        long long factor = 1000000;  // us
        trackInstantaneousMetric(STATS_METRIC_COMMAND, server.stat_numcommands, current_time, factor);
        trackInstantaneousMetric(STATS_METRIC_NET_INPUT, stat_net_input_bytes + stat_net_repl_input_bytes,
                                 current_time, factor);
        trackInstantaneousMetric(STATS_METRIC_NET_OUTPUT, stat_net_output_bytes + stat_net_repl_output_bytes,
                                 current_time, factor);
        trackInstantaneousMetric(STATS_METRIC_NET_INPUT_REPLICATION, stat_net_repl_input_bytes, current_time,
                                 factor);
        trackInstantaneousMetric(STATS_METRIC_NET_OUTPUT_REPLICATION, stat_net_repl_output_bytes,
                                 current_time, factor);
        trackInstantaneousMetric(STATS_METRIC_EL_CYCLE, server.duration_stats[EL_DURATION_TYPE_EL].cnt,
                                 current_time, factor);
        trackInstantaneousMetric(STATS_METRIC_EL_DURATION, server.duration_stats[EL_DURATION_TYPE_EL].sum,
                                 server.duration_stats[EL_DURATION_TYPE_EL].cnt, 1);
    }

    /* We have just LRU_BITS bits per object for LRU information.
     * So we use an (eventually wrapping) LRU clock.
     *
     * Note that even if the counter wraps it's not a big problem,
     * everything will still work but some object will appear younger
     * to the server. However for this to happen a given object should never be
     * touched for all the time needed to the counter to wrap, which is
     * not likely.
     *
     * Note that you can change the resolution altering the
     * LRU_CLOCK_RESOLUTION define. */
    server.lruclock = getLRUClock();

    cronUpdateMemoryStats();

    /* We received a SIGTERM or SIGINT, shutting down here in a safe way, as it is
     * not ok doing so inside the signal handler. */
    if (server.shutdown_asap && !isShutdownInitiated()) {
        int shutdownFlags = SHUTDOWN_NOFLAGS;
        if (server.last_sig_received == SIGINT && server.shutdown_on_sigint)
            shutdownFlags = server.shutdown_on_sigint;
        else if (server.last_sig_received == SIGTERM && server.shutdown_on_sigterm)
            shutdownFlags = server.shutdown_on_sigterm;

        if (prepareForShutdown(shutdownFlags) == C_OK) exit(0);
    } else if (isShutdownInitiated()) {
        if (server.mstime >= server.shutdown_mstime || isReadyToShutdown()) {
            if (finishShutdown() == C_OK) exit(0);
            /* Shutdown failed. Continue running. An error has been logged. */
        }
    }

    /* Show some info about non-empty databases */
    if (server.verbosity <= LL_VERBOSE) {
        run_with_period(5000) {
            for (j = 0; j < server.dbnum; j++) {
                long long size, used, vkeys;

                size = kvstoreBuckets(server.db[j].keys);
                used = kvstoreSize(server.db[j].keys);
                vkeys = kvstoreSize(server.db[j].expires);
                if (used || vkeys) {
                    serverLog(LL_VERBOSE,"DB %d: %lld keys (%lld volatile) in %lld slots HT.",j,used,vkeys,size);
                }
            }
        }
    }

    /* Show information about connected clients */
    if (!server.sentinel_mode) {
        run_with_period(5000) {
            serverLog(LL_DEBUG,
                "%lu clients connected (%lu replicas), %zu bytes in use",
                listLength(server.clients)-listLength(server.slaves),
                listLength(server.slaves),
                zmalloc_used_memory());
        }
    }

    /* We need to do a few operations on clients asynchronously. */
    clientsCron();

    /* Handle background operations on databases. */
    databasesCron();

    /* Start a scheduled AOF rewrite if this was requested by the user while
     * a BGSAVE was in progress. */
    if (!hasActiveChildProcess() &&
        server.aof_rewrite_scheduled &&
        !aofRewriteLimited())
    {
        rewriteAppendOnlyFileBackground();
    }

    /* Check if a background saving or AOF rewrite in progress terminated. */
    if (hasActiveChildProcess() || ldbPendingChildren())
    {
        run_with_period(1000) receiveChildInfo();
        checkChildrenDone();
    } else {
        /* If there is not a background saving/rewrite in progress check if
         * we have to save/rewrite now. */
        for (j = 0; j < server.saveparamslen; j++) {
            struct saveparam *sp = server.saveparams+j;

            /* Save if we reached the given amount of changes,
             * the given amount of seconds, and if the latest bgsave was
             * successful or if, in case of an error, at least
             * CONFIG_BGSAVE_RETRY_DELAY seconds already elapsed. */
            if (server.dirty >= sp->changes &&
                server.unixtime-server.lastsave > sp->seconds &&
                (server.unixtime-server.lastbgsave_try >
                 CONFIG_BGSAVE_RETRY_DELAY ||
                 server.lastbgsave_status == C_OK))
            {
                serverLog(LL_NOTICE,"%d changes in %d seconds. Saving...",
                    sp->changes, (int)sp->seconds);
                rdbSaveInfo rsi, *rsiptr;
                rsiptr = rdbPopulateSaveInfo(&rsi);
                rdbSaveBackground(SLAVE_REQ_NONE,server.rdb_filename,rsiptr,RDBFLAGS_NONE);
                break;
            }
        }

        /* Trigger an AOF rewrite if needed. */
        if (server.aof_state == AOF_ON &&
            !hasActiveChildProcess() &&
            server.aof_rewrite_perc &&
            server.aof_current_size > server.aof_rewrite_min_size)
        {
            long long base = server.aof_rewrite_base_size ?
                server.aof_rewrite_base_size : 1;
            long long growth = (server.aof_current_size*100/base) - 100;
            if (growth >= server.aof_rewrite_perc && !aofRewriteLimited()) {
                serverLog(LL_NOTICE,"Starting automatic rewriting of AOF on %lld%% growth",growth);
                rewriteAppendOnlyFileBackground();
            }
        }
    }
    /* Just for the sake of defensive programming, to avoid forgetting to
     * call this function when needed. */
    updateDictResizePolicy();

    /* AOF postponed flush: Try at every cron cycle if the slow fsync
     * completed. */
    if ((server.aof_state == AOF_ON || server.aof_state == AOF_WAIT_REWRITE) &&
        server.aof_flush_postponed_start)
    {
        flushAppendOnlyFile(0);
    }

    /* AOF write errors: in this case we have a buffer to flush as well and
     * clear the AOF error in case of success to make the DB writable again,
     * however to try every second is enough in case of 'hz' is set to
     * a higher frequency. */
    run_with_period(1000) {
        if ((server.aof_state == AOF_ON || server.aof_state == AOF_WAIT_REWRITE) &&
            server.aof_last_write_status == C_ERR) 
            {
                flushAppendOnlyFile(0);
            }
    }

    /* Clear the paused actions state if needed. */
    updatePausedActions();

    /* Replication cron function -- used to reconnect to master,
     * detect transfer failures, start background RDB transfers and so forth. 
     * 
     * If the server is trying to failover then run the replication cron faster so
     * progress on the handshake happens more quickly. */
    if (server.failover_state != NO_FAILOVER) {
        run_with_period(100) replicationCron();
    } else {
        run_with_period(1000) replicationCron();
    }

    /* Run the Cluster cron. */
    run_with_period(100) {
        if (server.cluster_enabled) clusterCron();
    }

    /* Run the Sentinel timer if we are in sentinel mode. */
    if (server.sentinel_mode) sentinelTimer();

    /* Cleanup expired MIGRATE cached sockets. */
    run_with_period(1000) {
        migrateCloseTimedoutSockets();
    }

    /* Stop the I/O threads if we don't have enough pending work. */
    stopThreadedIOIfNeeded();

    /* Resize tracking keys table if needed. This is also done at every
     * command execution, but we want to be sure that if the last command
     * executed changes the value via CONFIG SET, the server will perform
     * the operation even if completely idle. */
    if (server.tracking_clients) trackingLimitUsedSlots();

    /* Start a scheduled BGSAVE if the corresponding flag is set. This is
     * useful when we are forced to postpone a BGSAVE because an AOF
     * rewrite is in progress.
     *
     * Note: this code must be after the replicationCron() call above so
     * make sure when refactoring this file to keep this order. This is useful
     * because we want to give priority to RDB savings for replication. */
    if (!hasActiveChildProcess() &&
        server.rdb_bgsave_scheduled &&
        (server.unixtime-server.lastbgsave_try > CONFIG_BGSAVE_RETRY_DELAY ||
         server.lastbgsave_status == C_OK))
    {
        rdbSaveInfo rsi, *rsiptr;
        rsiptr = rdbPopulateSaveInfo(&rsi);
        if (rdbSaveBackground(SLAVE_REQ_NONE,server.rdb_filename,rsiptr,RDBFLAGS_NONE) == C_OK)
            server.rdb_bgsave_scheduled = 0;
    }

    run_with_period(100) {
        if (moduleCount()) modulesCron();
    }

    /* Fire the cron loop modules event. */
    ValkeyModuleCronLoopV1 ei = {VALKEYMODULE_CRON_LOOP_VERSION,server.hz};
    moduleFireServerEvent(VALKEYMODULE_EVENT_CRON_LOOP,
                          0,
                          &ei);

    server.cronloops++;

    server.el_cron_duration = getMonotonicUs() - cron_start;

    return 1000/server.hz;
}


void blockingOperationStarts(void) {
    if(!server.blocking_op_nesting++){
        updateCachedTime(0);
        server.blocked_last_cron = server.mstime;
    }
}

void blockingOperationEnds(void) {
    if(!(--server.blocking_op_nesting)){
        server.blocked_last_cron = 0;
    }
}

/* This function fills in the role of serverCron during RDB or AOF loading, and
 * also during blocked scripts.
 * It attempts to do its duties at a similar rate as the configured server.hz,
 * and updates cronloops variable so that similarly to serverCron, the
 * run_with_period can be used. */
void whileBlockedCron(void) {
    /* Here we may want to perform some cron jobs (normally done server.hz times
     * per second). */

    /* Since this function depends on a call to blockingOperationStarts, let's
     * make sure it was done. */
    serverAssert(server.blocked_last_cron);

    /* In case we were called too soon, leave right away. This way one time
     * jobs after the loop below don't need an if. and we don't bother to start
     * latency monitor if this function is called too often. */
    if (server.blocked_last_cron >= server.mstime)
        return;

    mstime_t latency;
    latencyStartMonitor(latency);

    /* In some cases we may be called with big intervals, so we may need to do
     * extra work here. This is because some of the functions in serverCron rely
     * on the fact that it is performed every 10 ms or so. For instance, if
     * activeDefragCycle needs to utilize 25% cpu, it will utilize 2.5ms, so we
     * need to call it multiple times. */
    long hz_ms = 1000/server.hz;
    while (server.blocked_last_cron < server.mstime) {

        /* Defrag keys gradually. */
        activeDefragCycle();

        server.blocked_last_cron += hz_ms;

        /* Increment cronloop so that run_with_period works. */
        server.cronloops++;
    }

    /* Other cron jobs do not need to be done in a loop. No need to check
     * server.blocked_last_cron since we have an early exit at the top. */

    /* Update memory stats during loading (excluding blocked scripts) */
    if (server.loading) cronUpdateMemoryStats();

    latencyEndMonitor(latency);
    latencyAddSampleIfNeeded("while-blocked-cron",latency);

    /* We received a SIGTERM during loading, shutting down here in a safe way,
     * as it isn't ok doing so inside the signal handler. */
    if (server.shutdown_asap && server.loading) {
        if (prepareForShutdown(SHUTDOWN_NOSAVE) == C_OK) exit(0);
        serverLog(LL_WARNING,"SIGTERM received but errors trying to shut down the server, check the logs for more information");
        server.shutdown_asap = 0;
        server.last_sig_received = 0;
    }
}

static void sendGetackToReplicas(void) {
    robj *argv[3];
    argv[0] = shared.replconf;
    argv[1] = shared.getack;
    argv[2] = shared.special_asterick; /* Not used argument. */
    replicationFeedSlaves(server.slaves, -1, argv, 3);
}

extern int ProcessingEventsWhileBlocked;

/* This function gets called every time the server is entering the
 * main loop of the event driven library, that is, before to sleep
 * for ready file descriptors.
 *
 * Note: This function is (currently) called from two functions:
 * 1. aeMain - The main server loop
 * 2. processEventsWhileBlocked - Process clients during RDB/AOF load
 *
 * If it was called from processEventsWhileBlocked we don't want
 * to perform all actions (For example, we don't want to expire
 * keys), but we do need to perform some actions.
 *
 * The most important is freeClientsInAsyncFreeQueue but we also
 * call some other low-risk functions. */
void beforeSleep(struct aeEventLoop *eventLoop) {
    UNUSED(eventLoop);

    size_t zmalloc_used = zmalloc_used_memory();
    if (zmalloc_used > server.stat_peak_memory)
        server.stat_peak_memory = zmalloc_used;

    /* Just call a subset of vital functions in case we are re-entering
     * the event loop from processEventsWhileBlocked(). Note that in this
     * case we keep track of the number of events we are processing, since
     * processEventsWhileBlocked() wants to stop ASAP if there are no longer
     * events to handle. */
    if (ProcessingEventsWhileBlocked) {
        uint64_t processed = 0;
        processed += handleClientsWithPendingReadsUsingThreads();
        processed += connTypeProcessPendingData();
        if (server.aof_state == AOF_ON || server.aof_state == AOF_WAIT_REWRITE)
            flushAppendOnlyFile(0);
        processed += handleClientsWithPendingWrites();
        processed += freeClientsInAsyncFreeQueue();
        server.events_processed_while_blocked += processed;
        return;
    }

    /* We should handle pending reads clients ASAP after event loop. */
    handleClientsWithPendingReadsUsingThreads();

    /* Handle pending data(typical TLS). (must be done before flushAppendOnlyFile) */
    connTypeProcessPendingData();

    /* If any connection type(typical TLS) still has pending unread data don't sleep at all. */
    int dont_sleep = connTypeHasPendingData();

    /* Call the Cluster before sleep function. Note that this function
     * may change the state of Cluster (from ok to fail or vice versa),
     * so it's a good idea to call it before serving the unblocked clients
     * later in this function, must be done before blockedBeforeSleep. */
    if (server.cluster_enabled) clusterBeforeSleep();

    /* Handle blocked clients.
     * must be done before flushAppendOnlyFile, in case of appendfsync=always,
     * since the unblocked clients may write data. */
    blockedBeforeSleep();

    /* Record cron time in beforeSleep, which is the sum of active-expire, active-defrag and all other
     * tasks done by cron and beforeSleep, but excluding read, write and AOF, that are counted by other
     * sets of metrics. */
    monotime cron_start_time_before_aof = getMonotonicUs();

    /* Run a fast expire cycle (the called function will return
     * ASAP if a fast cycle is not needed). */
    if (server.active_expire_enabled && iAmMaster())
        activeExpireCycle(ACTIVE_EXPIRE_CYCLE_FAST);

    if (moduleCount()) {
        moduleFireServerEvent(VALKEYMODULE_EVENT_EVENTLOOP,
                              VALKEYMODULE_SUBEVENT_EVENTLOOP_BEFORE_SLEEP,
                              NULL);
    }

    /* Send all the slaves an ACK request if at least one client blocked
     * during the previous event loop iteration. Note that we do this after
     * processUnblockedClients(), so if there are multiple pipelined WAITs
     * and the just unblocked WAIT gets blocked again, we don't have to wait
     * a server cron cycle in absence of other event loop events. See #6623.
     * 
     * We also don't send the ACKs while clients are paused, since it can
     * increment the replication backlog, they'll be sent after the pause
     * if we are still the master. */
    if (server.get_ack_from_slaves && !isPausedActionsWithUpdate(PAUSE_ACTION_REPLICA)) {
        sendGetackToReplicas();
        server.get_ack_from_slaves = 0;
    }

    /* We may have received updates from clients about their current offset. NOTE:
     * this can't be done where the ACK is received since failover will disconnect 
     * our clients. */
    updateFailoverStatus();

    /* Since we rely on current_client to send scheduled invalidation messages
     * we have to flush them after each command, so when we get here, the list
     * must be empty. */
    serverAssert(listLength(server.tracking_pending_keys) == 0);
    serverAssert(listLength(server.pending_push_messages) == 0);

    /* Send the invalidation messages to clients participating to the
     * client side caching protocol in broadcasting (BCAST) mode. */
    trackingBroadcastInvalidationMessages();

    /* Record time consumption of AOF writing. */
    monotime aof_start_time = getMonotonicUs();
    /* Record cron time in beforeSleep. This does not include the time consumed by AOF writing and IO writing below. */
    monotime duration_before_aof = aof_start_time - cron_start_time_before_aof;
    /* Record the fsync'd offset before flushAppendOnly */
    long long prev_fsynced_reploff = server.fsynced_reploff;

    /* Write the AOF buffer on disk,
     * must be done before handleClientsWithPendingWritesUsingThreads,
     * in case of appendfsync=always. */
    if (server.aof_state == AOF_ON || server.aof_state == AOF_WAIT_REWRITE)
        flushAppendOnlyFile(0);

    /* Record time consumption of AOF writing. */
    durationAddSample(EL_DURATION_TYPE_AOF, getMonotonicUs() - aof_start_time);

    /* Update the fsynced replica offset.
     * If an initial rewrite is in progress then not all data is guaranteed to have actually been
     * persisted to disk yet, so we cannot update the field. We will wait for the rewrite to complete. */
    if (server.aof_state == AOF_ON && server.fsynced_reploff != -1) {
        long long fsynced_reploff_pending;
        atomicGet(server.fsynced_reploff_pending, fsynced_reploff_pending);
        server.fsynced_reploff = fsynced_reploff_pending;

        /* If we have blocked [WAIT]AOF clients, and fsynced_reploff changed, we want to try to
         * wake them up ASAP. */
        if (listLength(server.clients_waiting_acks) && prev_fsynced_reploff != server.fsynced_reploff)
            dont_sleep = 1;
    }

    /* Handle writes with pending output buffers. */
    handleClientsWithPendingWritesUsingThreads();

    /* Record cron time in beforeSleep. This does not include the time consumed by AOF writing and IO writing above. */
    monotime cron_start_time_after_write = getMonotonicUs();

    /* Close clients that need to be closed asynchronous */
    freeClientsInAsyncFreeQueue();

    /* Incrementally trim replication backlog, 10 times the normal speed is
     * to free replication backlog as much as possible. */
    if (server.repl_backlog)
        incrementalTrimReplicationBacklog(10*REPL_BACKLOG_TRIM_BLOCKS_PER_CALL);

    /* Disconnect some clients if they are consuming too much memory. */
    evictClients();

    /* Record cron time in beforeSleep. */
    monotime duration_after_write = getMonotonicUs() - cron_start_time_after_write;

    /* Record eventloop latency. */
    if (server.el_start > 0) {
        monotime el_duration = getMonotonicUs() - server.el_start;
        durationAddSample(EL_DURATION_TYPE_EL, el_duration);
    }
    server.el_cron_duration += duration_before_aof + duration_after_write;
    durationAddSample(EL_DURATION_TYPE_CRON, server.el_cron_duration);
    server.el_cron_duration = 0;
    /* Record max command count per cycle. */
    if (server.stat_numcommands > server.el_cmd_cnt_start) {
        long long el_command_cnt = server.stat_numcommands - server.el_cmd_cnt_start;
        if (el_command_cnt > server.el_cmd_cnt_max) {
            server.el_cmd_cnt_max = el_command_cnt;
        }
    }

    /* Don't sleep at all before the next beforeSleep() if needed (e.g. a
     * connection has pending data) */
    aeSetDontWait(server.el, dont_sleep);

    /* Before we are going to sleep, let the threads access the dataset by
     * releasing the GIL. The server main thread will not touch anything at this
     * time. */
    if (moduleCount()) moduleReleaseGIL();
    /********************* WARNING ********************
     * Do NOT add anything below moduleReleaseGIL !!! *
     ***************************** ********************/
}

/* This function is called immediately after the event loop multiplexing
 * API returned, and the control is going to soon return to the server by invoking
 * the different events callbacks. */
void afterSleep(struct aeEventLoop *eventLoop) {
    UNUSED(eventLoop);
    /********************* WARNING ********************
     * Do NOT add anything above moduleAcquireGIL !!! *
     ***************************** ********************/
    if (!ProcessingEventsWhileBlocked) {
        /* Acquire the modules GIL so that their threads won't touch anything. */
        if (moduleCount()) {
            mstime_t latency;
            latencyStartMonitor(latency);

            atomicSet(server.module_gil_acquring, 1);
            moduleAcquireGIL();
            atomicSet(server.module_gil_acquring, 0);
            moduleFireServerEvent(VALKEYMODULE_EVENT_EVENTLOOP,
                                  VALKEYMODULE_SUBEVENT_EVENTLOOP_AFTER_SLEEP,
                                  NULL);
            latencyEndMonitor(latency);
            latencyAddSampleIfNeeded("module-acquire-GIL",latency);
        }
        /* Set the eventloop start time. */
        server.el_start = getMonotonicUs();
        /* Set the eventloop command count at start. */
        server.el_cmd_cnt_start = server.stat_numcommands;
    }

    /* Update the time cache. */
    updateCachedTime(1);

    /* Update command time snapshot in case it'll be required without a command
     * e.g. somehow used by module timers. Don't update it while yielding to a
     * blocked command, call() will handle that and restore the original time. */
    if (!ProcessingEventsWhileBlocked) {
        server.cmd_time_snapshot = server.mstime;
    }
}

/* =========================== Server initialization ======================== */

/* These shared strings depend on the extended-redis-compatibility config and is
 * called when the config changes. When the config is phased out, these
 * initializations can be moved back inside createSharedObjects() below. */
void createSharedObjectsWithCompat(void) {
    const char *name = server.extended_redis_compat ? "Redis" : SERVER_TITLE;
    if (shared.loadingerr) decrRefCount(shared.loadingerr);
    shared.loadingerr = createObject(OBJ_STRING, sdscatfmt(sdsempty(),
        "-LOADING %s is loading the dataset in memory\r\n", name));
    if (shared.slowevalerr) decrRefCount(shared.slowevalerr);
    shared.slowevalerr = createObject(OBJ_STRING, sdscatfmt(sdsempty(),
        "-BUSY %s is busy running a script. You can only call SCRIPT KILL or SHUTDOWN NOSAVE.\r\n", name));
    if (shared.slowscripterr) decrRefCount(shared.slowscripterr);
    shared.slowscripterr = createObject(OBJ_STRING, sdscatfmt(sdsempty(),
        "-BUSY %s is busy running a script. You can only call FUNCTION KILL or SHUTDOWN NOSAVE.\r\n", name));
    if (shared.slowmoduleerr) decrRefCount(shared.slowmoduleerr);
    shared.slowmoduleerr = createObject(OBJ_STRING, sdscatfmt(sdsempty(),
        "-BUSY %s is busy running a module command.\r\n", name));
    if (shared.bgsaveerr) decrRefCount(shared.bgsaveerr);
    shared.bgsaveerr = createObject(OBJ_STRING, sdscatfmt(sdsempty(),
        "-MISCONF %s is configured to save RDB snapshots, but it's currently"
        " unable to persist to disk. Commands that may modify the data set are"
        " disabled, because this instance is configured to report errors during"
        " writes if RDB snapshotting fails (stop-writes-on-bgsave-error option)."
        " Please check the %s logs for details about the RDB error.\r\n", name, name));
}

void createSharedObjects(void) {
    int j;

    /* Shared command responses */
    shared.ok = createObject(OBJ_STRING,sdsnew("+OK\r\n"));
    shared.emptybulk = createObject(OBJ_STRING,sdsnew("$0\r\n\r\n"));
    shared.czero = createObject(OBJ_STRING,sdsnew(":0\r\n"));
    shared.cone = createObject(OBJ_STRING,sdsnew(":1\r\n"));
    shared.emptyarray = createObject(OBJ_STRING,sdsnew("*0\r\n"));
    shared.pong = createObject(OBJ_STRING,sdsnew("+PONG\r\n"));
    shared.queued = createObject(OBJ_STRING,sdsnew("+QUEUED\r\n"));
    shared.emptyscan = createObject(OBJ_STRING,sdsnew("*2\r\n$1\r\n0\r\n*0\r\n"));
    shared.space = createObject(OBJ_STRING,sdsnew(" "));
    shared.plus = createObject(OBJ_STRING,sdsnew("+"));

    /* Shared command error responses */
    shared.wrongtypeerr = createObject(OBJ_STRING,sdsnew(
        "-WRONGTYPE Operation against a key holding the wrong kind of value\r\n"));
    shared.err = createObject(OBJ_STRING,sdsnew("-ERR\r\n"));
    shared.nokeyerr = createObject(OBJ_STRING,sdsnew(
        "-ERR no such key\r\n"));
    shared.syntaxerr = createObject(OBJ_STRING,sdsnew(
        "-ERR syntax error\r\n"));
    shared.sameobjecterr = createObject(OBJ_STRING,sdsnew(
        "-ERR source and destination objects are the same\r\n"));
    shared.outofrangeerr = createObject(OBJ_STRING,sdsnew(
        "-ERR index out of range\r\n"));
    shared.noscripterr = createObject(OBJ_STRING,sdsnew(
        "-NOSCRIPT No matching script. Please use EVAL.\r\n"));
    createSharedObjectsWithCompat();
    shared.masterdownerr = createObject(OBJ_STRING,sdsnew(
        "-MASTERDOWN Link with MASTER is down and replica-serve-stale-data is set to 'no'.\r\n"));
    shared.roslaveerr = createObject(OBJ_STRING,sdsnew(
        "-READONLY You can't write against a read only replica.\r\n"));
    shared.noautherr = createObject(OBJ_STRING,sdsnew(
        "-NOAUTH Authentication required.\r\n"));
    shared.oomerr = createObject(OBJ_STRING,sdsnew(
        "-OOM command not allowed when used memory > 'maxmemory'.\r\n"));
    shared.execaborterr = createObject(OBJ_STRING,sdsnew(
        "-EXECABORT Transaction discarded because of previous errors.\r\n"));
    shared.noreplicaserr = createObject(OBJ_STRING,sdsnew(
        "-NOREPLICAS Not enough good replicas to write.\r\n"));
    shared.busykeyerr = createObject(OBJ_STRING,sdsnew(
        "-BUSYKEY Target key name already exists.\r\n"));

    /* The shared NULL depends on the protocol version. */
    shared.null[0] = NULL;
    shared.null[1] = NULL;
    shared.null[2] = createObject(OBJ_STRING,sdsnew("$-1\r\n"));
    shared.null[3] = createObject(OBJ_STRING,sdsnew("_\r\n"));

    shared.nullarray[0] = NULL;
    shared.nullarray[1] = NULL;
    shared.nullarray[2] = createObject(OBJ_STRING,sdsnew("*-1\r\n"));
    shared.nullarray[3] = createObject(OBJ_STRING,sdsnew("_\r\n"));

    shared.emptymap[0] = NULL;
    shared.emptymap[1] = NULL;
    shared.emptymap[2] = createObject(OBJ_STRING,sdsnew("*0\r\n"));
    shared.emptymap[3] = createObject(OBJ_STRING,sdsnew("%0\r\n"));

    shared.emptyset[0] = NULL;
    shared.emptyset[1] = NULL;
    shared.emptyset[2] = createObject(OBJ_STRING,sdsnew("*0\r\n"));
    shared.emptyset[3] = createObject(OBJ_STRING,sdsnew("~0\r\n"));

    for (j = 0; j < PROTO_SHARED_SELECT_CMDS; j++) {
        char dictid_str[64];
        int dictid_len;

        dictid_len = ll2string(dictid_str,sizeof(dictid_str),j);
        shared.select[j] = createObject(OBJ_STRING,
            sdscatprintf(sdsempty(),
                "*2\r\n$6\r\nSELECT\r\n$%d\r\n%s\r\n",
                dictid_len, dictid_str));
    }
    shared.messagebulk = createStringObject("$7\r\nmessage\r\n",13);
    shared.pmessagebulk = createStringObject("$8\r\npmessage\r\n",14);
    shared.subscribebulk = createStringObject("$9\r\nsubscribe\r\n",15);
    shared.unsubscribebulk = createStringObject("$11\r\nunsubscribe\r\n",18);
    shared.ssubscribebulk = createStringObject("$10\r\nssubscribe\r\n", 17);
    shared.sunsubscribebulk = createStringObject("$12\r\nsunsubscribe\r\n", 19);
    shared.smessagebulk = createStringObject("$8\r\nsmessage\r\n", 14);
    shared.psubscribebulk = createStringObject("$10\r\npsubscribe\r\n",17);
    shared.punsubscribebulk = createStringObject("$12\r\npunsubscribe\r\n",19);

    /* Shared command names */
    shared.del = createStringObject("DEL",3);
    shared.unlink = createStringObject("UNLINK",6);
    shared.rpop = createStringObject("RPOP",4);
    shared.lpop = createStringObject("LPOP",4);
    shared.lpush = createStringObject("LPUSH",5);
    shared.rpoplpush = createStringObject("RPOPLPUSH",9);
    shared.lmove = createStringObject("LMOVE",5);
    shared.blmove = createStringObject("BLMOVE",6);
    shared.zpopmin = createStringObject("ZPOPMIN",7);
    shared.zpopmax = createStringObject("ZPOPMAX",7);
    shared.multi = createStringObject("MULTI",5);
    shared.exec = createStringObject("EXEC",4);
    shared.hset = createStringObject("HSET",4);
    shared.srem = createStringObject("SREM",4);
    shared.xgroup = createStringObject("XGROUP",6);
    shared.xclaim = createStringObject("XCLAIM",6);
    shared.script = createStringObject("SCRIPT",6);
    shared.replconf = createStringObject("REPLCONF",8);
    shared.pexpireat = createStringObject("PEXPIREAT",9);
    shared.pexpire = createStringObject("PEXPIRE",7);
    shared.persist = createStringObject("PERSIST",7);
    shared.set = createStringObject("SET",3);
    shared.eval = createStringObject("EVAL",4);

    /* Shared command argument */
    shared.left = createStringObject("left",4);
    shared.right = createStringObject("right",5);
    shared.pxat = createStringObject("PXAT", 4);
    shared.time = createStringObject("TIME",4);
    shared.retrycount = createStringObject("RETRYCOUNT",10);
    shared.force = createStringObject("FORCE",5);
    shared.justid = createStringObject("JUSTID",6);
    shared.entriesread = createStringObject("ENTRIESREAD",11);
    shared.lastid = createStringObject("LASTID",6);
    shared.default_username = createStringObject("default",7);
    shared.ping = createStringObject("ping",4);
    shared.setid = createStringObject("SETID",5);
    shared.keepttl = createStringObject("KEEPTTL",7);
    shared.absttl = createStringObject("ABSTTL",6);
    shared.load = createStringObject("LOAD",4);
    shared.createconsumer = createStringObject("CREATECONSUMER",14);
    shared.getack = createStringObject("GETACK",6);
    shared.special_asterick = createStringObject("*",1);
    shared.special_equals = createStringObject("=",1);
    shared.redacted = makeObjectShared(createStringObject("(redacted)",10));

    for (j = 0; j < OBJ_SHARED_INTEGERS; j++) {
        shared.integers[j] =
            makeObjectShared(createObject(OBJ_STRING,(void*)(long)j));
        initObjectLRUOrLFU(shared.integers[j]);
        shared.integers[j]->encoding = OBJ_ENCODING_INT;
    }
    for (j = 0; j < OBJ_SHARED_BULKHDR_LEN; j++) {
        shared.mbulkhdr[j] = createObject(OBJ_STRING,
            sdscatprintf(sdsempty(),"*%d\r\n",j));
        shared.bulkhdr[j] = createObject(OBJ_STRING,
            sdscatprintf(sdsempty(),"$%d\r\n",j));
        shared.maphdr[j] = createObject(OBJ_STRING,
            sdscatprintf(sdsempty(),"%%%d\r\n",j));
        shared.sethdr[j] = createObject(OBJ_STRING,
            sdscatprintf(sdsempty(),"~%d\r\n",j));
    }
    /* The following two shared objects, minstring and maxstring, are not
     * actually used for their value but as a special object meaning
     * respectively the minimum possible string and the maximum possible
     * string in string comparisons for the ZRANGEBYLEX command. */
    shared.minstring = sdsnew("minstring");
    shared.maxstring = sdsnew("maxstring");
}

void initServerClientMemUsageBuckets(void) {
    if (server.client_mem_usage_buckets)
        return;
    server.client_mem_usage_buckets = zmalloc(sizeof(clientMemUsageBucket)*CLIENT_MEM_USAGE_BUCKETS);
    for (int j = 0; j < CLIENT_MEM_USAGE_BUCKETS; j++) {
        server.client_mem_usage_buckets[j].mem_usage_sum = 0;
        server.client_mem_usage_buckets[j].clients = listCreate();
    }
}

void freeServerClientMemUsageBuckets(void) {
    if (!server.client_mem_usage_buckets)
        return;
    for (int j = 0; j < CLIENT_MEM_USAGE_BUCKETS; j++)
        listRelease(server.client_mem_usage_buckets[j].clients);
    zfree(server.client_mem_usage_buckets);
    server.client_mem_usage_buckets = NULL;
}

void initServerConfig(void) {
    int j;
    char *default_bindaddr[CONFIG_DEFAULT_BINDADDR_COUNT] = CONFIG_DEFAULT_BINDADDR;

    initConfigValues();
    updateCachedTime(1);
    server.cmd_time_snapshot = server.mstime;
    getRandomHexChars(server.runid,CONFIG_RUN_ID_SIZE);
    server.runid[CONFIG_RUN_ID_SIZE] = '\0';
    changeReplicationId();
    clearReplicationId2();
    server.hz = CONFIG_DEFAULT_HZ; /* Initialize it ASAP, even if it may get
                                      updated later after loading the config.
                                      This value may be used before the server
                                      is initialized. */
    server.timezone = getTimeZone(); /* Initialized by tzset(). */
    server.configfile = NULL;
    server.executable = NULL;
    server.arch_bits = (sizeof(long) == 8) ? 64 : 32;
    server.bindaddr_count = CONFIG_DEFAULT_BINDADDR_COUNT;
    for (j = 0; j < CONFIG_DEFAULT_BINDADDR_COUNT; j++)
        server.bindaddr[j] = zstrdup(default_bindaddr[j]);
    memset(server.listeners, 0x00, sizeof(server.listeners));
    server.active_expire_enabled = 1;
    server.lazy_expire_disabled = 0;
    server.skip_checksum_validation = 0;
    server.loading = 0;
    server.async_loading = 0;
    server.loading_rdb_used_mem = 0;
    server.aof_state = AOF_OFF;
    server.aof_rewrite_base_size = 0;
    server.aof_rewrite_scheduled = 0;
    server.aof_flush_sleep = 0;
    server.aof_last_fsync = time(NULL) * 1000;
    server.aof_cur_timestamp = 0;
    atomicSet(server.aof_bio_fsync_status,C_OK);
    server.aof_rewrite_time_last = -1;
    server.aof_rewrite_time_start = -1;
    server.aof_lastbgrewrite_status = C_OK;
    server.aof_delayed_fsync = 0;
    server.aof_fd = -1;
    server.aof_selected_db = -1; /* Make sure the first time will not match */
    server.aof_flush_postponed_start = 0;
    server.aof_last_incr_size = 0;
    server.aof_last_incr_fsync_offset = 0;
    server.active_defrag_running = 0;
    server.active_defrag_configuration_changed = 0;
    server.notify_keyspace_events = 0;
    server.blocked_clients = 0;
    memset(server.blocked_clients_by_type,0,
           sizeof(server.blocked_clients_by_type));
    server.shutdown_asap = 0;
    server.shutdown_flags = 0;
    server.shutdown_mstime = 0;
    server.cluster_module_flags = CLUSTER_MODULE_FLAG_NONE;
    server.migrate_cached_sockets = dictCreate(&migrateCacheDictType);
    server.next_client_id = 1; /* Client IDs, start from 1 .*/
    server.page_size = sysconf(_SC_PAGESIZE);
    server.extended_redis_compat = 0;
    server.pause_cron = 0;
    server.dict_resizing = 1;

    server.latency_tracking_info_percentiles_len = 3;
    server.latency_tracking_info_percentiles = zmalloc(sizeof(double)*(server.latency_tracking_info_percentiles_len));
    server.latency_tracking_info_percentiles[0] = 50.0;  /* p50 */
    server.latency_tracking_info_percentiles[1] = 99.0;  /* p99 */
    server.latency_tracking_info_percentiles[2] = 99.9;  /* p999 */

    server.lruclock = getLRUClock();
    resetServerSaveParams();

    appendServerSaveParams(60*60,1);  /* save after 1 hour and 1 change */
    appendServerSaveParams(300,100);  /* save after 5 minutes and 100 changes */
    appendServerSaveParams(60,10000); /* save after 1 minute and 10000 changes */

    /* Replication related */
    server.masterhost = NULL;
    server.masterport = 6379;
    server.master = NULL;
    server.cached_master = NULL;
    server.master_initial_offset = -1;
    server.repl_state = REPL_STATE_NONE;
    server.repl_transfer_tmpfile = NULL;
    server.repl_transfer_fd = -1;
    server.repl_transfer_s = NULL;
    server.repl_syncio_timeout = CONFIG_REPL_SYNCIO_TIMEOUT;
    server.repl_down_since = 0; /* Never connected, repl is down since EVER. */
    server.master_repl_offset = 0;
    server.fsynced_reploff_pending = 0;

    /* Replication partial resync backlog */
    server.repl_backlog = NULL;
    server.repl_no_slaves_since = time(NULL);

    /* Failover related */
    server.failover_end_time = 0;
    server.force_failover = 0;
    server.target_replica_host = NULL;
    server.target_replica_port = 0;
    server.failover_state = NO_FAILOVER;

    /* Client output buffer limits */
    for (j = 0; j < CLIENT_TYPE_OBUF_COUNT; j++)
        server.client_obuf_limits[j] = clientBufferLimitsDefaults[j];

    /* Linux OOM Score config */
    for (j = 0; j < CONFIG_OOM_COUNT; j++)
        server.oom_score_adj_values[j] = configOOMScoreAdjValuesDefaults[j];

    /* Double constants initialization */
    R_Zero = 0.0;
    R_PosInf = 1.0/R_Zero;
    R_NegInf = -1.0/R_Zero;
    R_Nan = R_Zero/R_Zero;

    /* Command table -- we initialize it here as it is part of the
     * initial configuration, since command names may be changed via
     * valkey.conf using the rename-command directive. */
    server.commands = dictCreate(&commandTableDictType);
    server.orig_commands = dictCreate(&commandTableDictType);
    populateCommandTable();

    /* Debugging */
    server.watchdog_period = 0;
}

extern char **environ;

/* Restart the server, executing the same executable that started this
 * instance, with the same arguments and configuration file.
 *
 * The function is designed to directly call execve() so that the new
 * server instance will retain the PID of the previous one.
 *
 * The list of flags, that may be bitwise ORed together, alter the
 * behavior of this function:
 *
 * RESTART_SERVER_NONE              No flags.
 * RESTART_SERVER_GRACEFULLY        Do a proper shutdown before restarting.
 * RESTART_SERVER_CONFIG_REWRITE    Rewrite the config file before restarting.
 *
 * On success the function does not return, because the process turns into
 * a different process. On error C_ERR is returned. */
int restartServer(int flags, mstime_t delay) {
    int j;

    /* Check if we still have accesses to the executable that started this
     * server instance. */
    if (access(server.executable,X_OK) == -1) {
        serverLog(LL_WARNING,"Can't restart: this process has no "
                             "permissions to execute %s", server.executable);
        return C_ERR;
    }

    /* Config rewriting. */
    if (flags & RESTART_SERVER_CONFIG_REWRITE &&
        server.configfile &&
        rewriteConfig(server.configfile, 0) == -1)
    {
        serverLog(LL_WARNING,"Can't restart: configuration rewrite process "
                             "failed: %s", strerror(errno));
        return C_ERR;
    }

    /* Perform a proper shutdown. We don't wait for lagging replicas though. */
    if (flags & RESTART_SERVER_GRACEFULLY &&
        prepareForShutdown(SHUTDOWN_NOW) != C_OK)
    {
        serverLog(LL_WARNING,"Can't restart: error preparing for shutdown");
        return C_ERR;
    }

    /* Close all file descriptors, with the exception of stdin, stdout, stderr
     * which are useful if we restart a server which is not daemonized. */
    for (j = 3; j < (int)server.maxclients + 1024; j++) {
        /* Test the descriptor validity before closing it, otherwise
         * Valgrind issues a warning on close(). */
        if (fcntl(j,F_GETFD) != -1) close(j);
    }

    /* Execute the server with the original command line. */
    if (delay) usleep(delay*1000);
    zfree(server.exec_argv[0]);
    server.exec_argv[0] = zstrdup(server.executable);
    execve(server.executable,server.exec_argv,environ);

    /* If an error occurred here, there is nothing we can do, but exit. */
    _exit(1);

    return C_ERR; /* Never reached. */
}

/* This function will configure the current process's oom_score_adj according
 * to user specified configuration. This is currently implemented on Linux
 * only.
 *
 * A process_class value of -1 implies OOM_CONFIG_MASTER or OOM_CONFIG_REPLICA,
 * depending on current role.
 */
int setOOMScoreAdj(int process_class) {
    if (process_class == -1)
        process_class = (server.masterhost ? CONFIG_OOM_REPLICA : CONFIG_OOM_MASTER);

    serverAssert(process_class >= 0 && process_class < CONFIG_OOM_COUNT);

#ifdef HAVE_PROC_OOM_SCORE_ADJ
    /* The following statics are used to indicate the server has changed the process's oom score.
     * And to save the original score so we can restore it later if needed.
     * We need this so when we disabled oom-score-adj (also during configuration rollback
     * when another configuration parameter was invalid and causes a rollback after
     * applying a new oom-score) we can return to the oom-score value from before our
     * adjustments. */
    static int oom_score_adjusted_by_valkey = 0;
    static int oom_score_adj_base = 0;

    int fd;
    int val;
    char buf[64];

    if (server.oom_score_adj != OOM_SCORE_ADJ_NO) {
        if (!oom_score_adjusted_by_valkey) {
            oom_score_adjusted_by_valkey = 1;
            /* Backup base value before enabling the server control over oom score */
            fd = open("/proc/self/oom_score_adj", O_RDONLY);
            if (fd < 0 || read(fd, buf, sizeof(buf)) < 0) {
                serverLog(LL_WARNING, "Unable to read oom_score_adj: %s", strerror(errno));
                if (fd != -1) close(fd);
                return C_ERR;
            }
            oom_score_adj_base = atoi(buf);
            close(fd);
        }

        val = server.oom_score_adj_values[process_class];
        if (server.oom_score_adj == OOM_SCORE_RELATIVE)
            val += oom_score_adj_base;
        if (val > 1000) val = 1000;
        if (val < -1000) val = -1000;
    } else if (oom_score_adjusted_by_valkey) {
        oom_score_adjusted_by_valkey = 0;
        val = oom_score_adj_base;
    }
    else {
        return C_OK;
    }

    snprintf(buf, sizeof(buf) - 1, "%d\n", val);

    fd = open("/proc/self/oom_score_adj", O_WRONLY);
    if (fd < 0 || write(fd, buf, strlen(buf)) < 0) {
        serverLog(LL_WARNING, "Unable to write oom_score_adj: %s", strerror(errno));
        if (fd != -1) close(fd);
        return C_ERR;
    }

    close(fd);
    return C_OK;
#else
    /* Unsupported */
    return C_ERR;
#endif
}

/* This function will try to raise the max number of open files accordingly to
 * the configured max number of clients. It also reserves a number of file
 * descriptors (CONFIG_MIN_RESERVED_FDS) for extra operations of
 * persistence, listening sockets, log files and so forth.
 *
 * If it will not be possible to set the limit accordingly to the configured
 * max number of clients, the function will do the reverse setting
 * server.maxclients to the value that we can actually handle. */
void adjustOpenFilesLimit(void) {
    rlim_t maxfiles = server.maxclients+CONFIG_MIN_RESERVED_FDS;
    struct rlimit limit;

    if (getrlimit(RLIMIT_NOFILE,&limit) == -1) {
        serverLog(LL_WARNING,"Unable to obtain the current NOFILE limit (%s), assuming 1024 and setting the max clients configuration accordingly.",
            strerror(errno));
        server.maxclients = 1024-CONFIG_MIN_RESERVED_FDS;
    } else {
        rlim_t oldlimit = limit.rlim_cur;

        /* Set the max number of files if the current limit is not enough
         * for our needs. */
        if (oldlimit < maxfiles) {
            rlim_t bestlimit;
            int setrlimit_error = 0;

            /* Try to set the file limit to match 'maxfiles' or at least
             * to the higher value supported less than maxfiles. */
            bestlimit = maxfiles;
            while(bestlimit > oldlimit) {
                rlim_t decr_step = 16;

                limit.rlim_cur = bestlimit;
                limit.rlim_max = bestlimit;
                if (setrlimit(RLIMIT_NOFILE,&limit) != -1) break;
                setrlimit_error = errno;

                /* We failed to set file limit to 'bestlimit'. Try with a
                 * smaller limit decrementing by a few FDs per iteration. */
                if (bestlimit < decr_step) {
                    bestlimit = oldlimit;
                    break;
                }
                bestlimit -= decr_step;
            }

            /* Assume that the limit we get initially is still valid if
             * our last try was even lower. */
            if (bestlimit < oldlimit) bestlimit = oldlimit;

            if (bestlimit < maxfiles) {
                unsigned int old_maxclients = server.maxclients;
                server.maxclients = bestlimit-CONFIG_MIN_RESERVED_FDS;
                /* maxclients is unsigned so may overflow: in order
                 * to check if maxclients is now logically less than 1
                 * we test indirectly via bestlimit. */
                if (bestlimit <= CONFIG_MIN_RESERVED_FDS) {
                    serverLog(LL_WARNING,"Your current 'ulimit -n' "
                        "of %llu is not enough for the server to start. "
                        "Please increase your open file limit to at least "
                        "%llu. Exiting.",
                        (unsigned long long) oldlimit,
                        (unsigned long long) maxfiles);
                    exit(1);
                }
                serverLog(LL_WARNING,"You requested maxclients of %d "
                    "requiring at least %llu max file descriptors.",
                    old_maxclients,
                    (unsigned long long) maxfiles);
                serverLog(LL_WARNING,"Server can't set maximum open files "
                    "to %llu because of OS error: %s.",
                    (unsigned long long) maxfiles, strerror(setrlimit_error));
                serverLog(LL_WARNING,"Current maximum open files is %llu. "
                    "maxclients has been reduced to %d to compensate for "
                    "low ulimit. "
                    "If you need higher maxclients increase 'ulimit -n'.",
                    (unsigned long long) bestlimit, server.maxclients);
            } else {
                serverLog(LL_NOTICE,"Increased maximum number of open files "
                    "to %llu (it was originally set to %llu).",
                    (unsigned long long) maxfiles,
                    (unsigned long long) oldlimit);
            }
        }
    }
}

/* Check that server.tcp_backlog can be actually enforced in Linux according
 * to the value of /proc/sys/net/core/somaxconn, or warn about it. */
void checkTcpBacklogSettings(void) {
#if defined(HAVE_PROC_SOMAXCONN)
    FILE *fp = fopen("/proc/sys/net/core/somaxconn","r");
    char buf[1024];
    if (!fp) return;
    if (fgets(buf,sizeof(buf),fp) != NULL) {
        int somaxconn = atoi(buf);
        if (somaxconn > 0 && somaxconn < server.tcp_backlog) {
            serverLog(LL_WARNING,"WARNING: The TCP backlog setting of %d cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of %d.", server.tcp_backlog, somaxconn);
        }
    }
    fclose(fp);
#elif defined(HAVE_SYSCTL_KIPC_SOMAXCONN)
    int somaxconn, mib[3];
    size_t len = sizeof(int);

    mib[0] = CTL_KERN;
    mib[1] = KERN_IPC;
    mib[2] = KIPC_SOMAXCONN;

    if (sysctl(mib, 3, &somaxconn, &len, NULL, 0) == 0) {
        if (somaxconn > 0 && somaxconn < server.tcp_backlog) {
            serverLog(LL_WARNING,"WARNING: The TCP backlog setting of %d cannot be enforced because kern.ipc.somaxconn is set to the lower value of %d.", server.tcp_backlog, somaxconn);
        }
    }
#elif defined(HAVE_SYSCTL_KERN_SOMAXCONN)
    int somaxconn, mib[2];
    size_t len = sizeof(int);

    mib[0] = CTL_KERN;
    mib[1] = KERN_SOMAXCONN;

    if (sysctl(mib, 2, &somaxconn, &len, NULL, 0) == 0) {
        if (somaxconn > 0 && somaxconn < server.tcp_backlog) {
            serverLog(LL_WARNING,"WARNING: The TCP backlog setting of %d cannot be enforced because kern.somaxconn is set to the lower value of %d.", server.tcp_backlog, somaxconn);
        }
    }
#elif defined(SOMAXCONN)
    if (SOMAXCONN < server.tcp_backlog) {
        serverLog(LL_WARNING,"WARNING: The TCP backlog setting of %d cannot be enforced because SOMAXCONN is set to the lower value of %d.", server.tcp_backlog, SOMAXCONN);
    }
#endif
}

void closeListener(connListener *sfd) {
    int j;

    for (j = 0; j < sfd->count; j++) {
        if (sfd->fd[j] == -1) continue;

        aeDeleteFileEvent(server.el, sfd->fd[j], AE_READABLE);
        close(sfd->fd[j]);
    }

    sfd->count = 0;
}

/* Create an event handler for accepting new connections in TCP or TLS domain sockets.
 * This works atomically for all socket fds */
int createSocketAcceptHandler(connListener *sfd, aeFileProc *accept_handler) {
    int j;

    for (j = 0; j < sfd->count; j++) {
        if (aeCreateFileEvent(server.el, sfd->fd[j], AE_READABLE, accept_handler,sfd) == AE_ERR) {
            /* Rollback */
            for (j = j-1; j >= 0; j--) aeDeleteFileEvent(server.el, sfd->fd[j], AE_READABLE);
            return C_ERR;
        }
    }
    return C_OK;
}

/* Initialize a set of file descriptors to listen to the specified 'port'
 * binding the addresses specified in the server configuration.
 *
 * The listening file descriptors are stored in the integer array 'fds'
 * and their number is set in '*count'. Actually @sfd should be 'listener',
 * for the historical reasons, let's keep 'sfd' here.
 *
 * The addresses to bind are specified in the global server.bindaddr array
 * and their number is server.bindaddr_count. If the server configuration
 * contains no specific addresses to bind, this function will try to
 * bind * (all addresses) for both the IPv4 and IPv6 protocols.
 *
 * On success the function returns C_OK.
 *
 * On error the function returns C_ERR. For the function to be on
 * error, at least one of the server.bindaddr addresses was
 * impossible to bind, or no bind addresses were specified in the server
 * configuration but the function is not able to bind * for at least
 * one of the IPv4 or IPv6 protocols. */
int listenToPort(connListener *sfd) {
    int j;
    int port = sfd->port;
    char **bindaddr = sfd->bindaddr;

    /* If we have no bind address, we don't listen on a TCP socket */
    if (sfd->bindaddr_count == 0) return C_OK;

    for (j = 0; j < sfd->bindaddr_count; j++) {
        char* addr = bindaddr[j];
        int optional = *addr == '-';
        if (optional) addr++;
        if (strchr(addr,':')) {
            /* Bind IPv6 address. */
            sfd->fd[sfd->count] = anetTcp6Server(server.neterr,port,addr,server.tcp_backlog);
        } else {
            /* Bind IPv4 address. */
            sfd->fd[sfd->count] = anetTcpServer(server.neterr,port,addr,server.tcp_backlog);
        }
        if (sfd->fd[sfd->count] == ANET_ERR) {
            int net_errno = errno;
            serverLog(LL_WARNING,
                "Warning: Could not create server TCP listening socket %s:%d: %s",
                addr, port, server.neterr);
            if (net_errno == EADDRNOTAVAIL && optional)
                continue;
            if (net_errno == ENOPROTOOPT     || net_errno == EPROTONOSUPPORT ||
                net_errno == ESOCKTNOSUPPORT || net_errno == EPFNOSUPPORT ||
                net_errno == EAFNOSUPPORT)
                continue;

            /* Rollback successful listens before exiting */
            closeListener(sfd);
            return C_ERR;
        }
        if (server.socket_mark_id > 0) anetSetSockMarkId(NULL, sfd->fd[sfd->count], server.socket_mark_id);
        anetNonBlock(NULL,sfd->fd[sfd->count]);
        anetCloexec(sfd->fd[sfd->count]);
        sfd->count++;
    }
    return C_OK;
}

/* Resets the stats that we expose via INFO or other means that we want
 * to reset via CONFIG RESETSTAT. The function is also used in order to
 * initialize these fields in initServer() at server startup. */
void resetServerStats(void) {
    int j;

    server.stat_numcommands = 0;
    server.stat_numconnections = 0;
    server.stat_expiredkeys = 0;
    server.stat_expired_stale_perc = 0;
    server.stat_expired_time_cap_reached_count = 0;
    server.stat_expire_cycle_time_used = 0;
    server.stat_evictedkeys = 0;
    server.stat_evictedclients = 0;
    server.stat_evictedscripts = 0;
    server.stat_total_eviction_exceeded_time = 0;
    server.stat_last_eviction_exceeded_time = 0;
    server.stat_keyspace_misses = 0;
    server.stat_keyspace_hits = 0;
    server.stat_active_defrag_hits = 0;
    server.stat_active_defrag_misses = 0;
    server.stat_active_defrag_key_hits = 0;
    server.stat_active_defrag_key_misses = 0;
    server.stat_active_defrag_scanned = 0;
    server.stat_total_active_defrag_time = 0;
    server.stat_last_active_defrag_time = 0;
    server.stat_fork_time = 0;
    server.stat_fork_rate = 0;
    server.stat_total_forks = 0;
    server.stat_rejected_conn = 0;
    server.stat_sync_full = 0;
    server.stat_sync_partial_ok = 0;
    server.stat_sync_partial_err = 0;
    server.stat_io_reads_processed = 0;
    atomicSet(server.stat_total_reads_processed, 0);
    server.stat_io_writes_processed = 0;
    atomicSet(server.stat_total_writes_processed, 0);
    atomicSet(server.stat_client_qbuf_limit_disconnections, 0);
    server.stat_client_outbuf_limit_disconnections = 0;
    for (j = 0; j < STATS_METRIC_COUNT; j++) {
        server.inst_metric[j].idx = 0;
        server.inst_metric[j].last_sample_base = 0;
        server.inst_metric[j].last_sample_value = 0;
        memset(server.inst_metric[j].samples,0,
            sizeof(server.inst_metric[j].samples));
    }
    server.stat_aof_rewrites = 0;
    server.stat_rdb_saves = 0;
    server.stat_aofrw_consecutive_failures = 0;
    atomicSet(server.stat_net_input_bytes, 0);
    atomicSet(server.stat_net_output_bytes, 0);
    atomicSet(server.stat_net_repl_input_bytes, 0);
    atomicSet(server.stat_net_repl_output_bytes, 0);
    server.stat_unexpected_error_replies = 0;
    server.stat_total_error_replies = 0;
    server.stat_dump_payload_sanitizations = 0;
    server.aof_delayed_fsync = 0;
    server.stat_reply_buffer_shrinks = 0;
    server.stat_reply_buffer_expands = 0;
    memset(server.duration_stats, 0, sizeof(durationStats) * EL_DURATION_TYPE_NUM);
    server.el_cmd_cnt_max = 0;
    lazyfreeResetStats();
}

/* Make the thread killable at any time, so that kill threads functions
 * can work reliably (default cancellability type is PTHREAD_CANCEL_DEFERRED).
 * Needed for pthread_cancel used by the fast memory test used by the crash report. */
void makeThreadKillable(void) {
    pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL);
    pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL);
}

void initServer(void) {
    int j;

    signal(SIGHUP, SIG_IGN);
    signal(SIGPIPE, SIG_IGN);
    setupSignalHandlers();
    ThreadsManager_init();
    makeThreadKillable();

    if (server.syslog_enabled) {
        openlog(server.syslog_ident, LOG_PID | LOG_NDELAY | LOG_NOWAIT,
            server.syslog_facility);
    }

    /* Initialization after setting defaults from the config system. */
    server.aof_state = server.aof_enabled ? AOF_ON : AOF_OFF;
    server.fsynced_reploff = server.aof_enabled ? 0 : -1;
    server.hz = server.config_hz;
    server.pid = getpid();
    server.in_fork_child = CHILD_TYPE_NONE;
    server.main_thread_id = pthread_self();
    server.current_client = NULL;
    server.errors = raxNew();
    server.errors_enabled = 1;
    server.execution_nesting = 0;
    server.clients = listCreate();
    server.clients_index = raxNew();
    server.clients_to_close = listCreate();
    server.slaves = listCreate();
    server.monitors = listCreate();
    server.clients_pending_write = listCreate();
    server.clients_pending_read = listCreate();
    server.clients_timeout_table = raxNew();
    server.replication_allowed = 1;
    server.slaveseldb = -1; /* Force to emit the first SELECT command. */
    server.unblocked_clients = listCreate();
    server.ready_keys = listCreate();
    server.tracking_pending_keys = listCreate();
    server.pending_push_messages = listCreate();
    server.clients_waiting_acks = listCreate();
    server.get_ack_from_slaves = 0;
    server.paused_actions = 0;
    memset(server.client_pause_per_purpose, 0,
           sizeof(server.client_pause_per_purpose));
    server.postponed_clients = listCreate();
    server.events_processed_while_blocked = 0;
    server.system_memory_size = zmalloc_get_memory_size();
    server.blocked_last_cron = 0;
    server.blocking_op_nesting = 0;
    server.thp_enabled = 0;
    server.cluster_drop_packet_filter = -1;
    server.reply_buffer_peak_reset_time = REPLY_BUFFER_DEFAULT_PEAK_RESET_TIME;
    server.reply_buffer_resizing_enabled = 1;
    server.client_mem_usage_buckets = NULL;
    resetReplicationBuffer();

    /* Make sure the locale is set on startup based on the config file. */
    if (setlocale(LC_COLLATE,server.locale_collate) == NULL) {
        serverLog(LL_WARNING, "Failed to configure LOCALE for invalid locale name.");
        exit(1);
    }

    createSharedObjects();
    adjustOpenFilesLimit();
    const char *clk_msg = monotonicInit();
    serverLog(LL_NOTICE, "monotonic clock: %s", clk_msg);
    server.el = aeCreateEventLoop(server.maxclients+CONFIG_FDSET_INCR);
    if (server.el == NULL) {
        serverLog(LL_WARNING,
            "Failed creating the event loop. Error message: '%s'",
            strerror(errno));
        exit(1);
    }
    server.db = zmalloc(sizeof(server)*server.dbnum);

    /* Create the databases, and initialize other internal state. */
    int slot_count_bits = 0;
    int flags = KVSTORE_ALLOCATE_DICTS_ON_DEMAND;
    if (server.cluster_enabled) {
        slot_count_bits = CLUSTER_SLOT_MASK_BITS;
        flags |= KVSTORE_FREE_EMPTY_DICTS;
    }
    for (j = 0; j < server.dbnum; j++) {
        server.db[j].keys = kvstoreCreate(&dbDictType, slot_count_bits, flags);
        server.db[j].expires = kvstoreCreate(&dbExpiresDictType, slot_count_bits, flags);
        server.db[j].expires_cursor = 0;
        server.db[j].blocking_keys = dictCreate(&keylistDictType);
        server.db[j].blocking_keys_unblock_on_nokey = dictCreate(&objectKeyPointerValueDictType);
        server.db[j].ready_keys = dictCreate(&objectKeyPointerValueDictType);
        server.db[j].watched_keys = dictCreate(&keylistDictType);
        server.db[j].id = j;
        server.db[j].avg_ttl = 0;
        server.db[j].defrag_later = listCreate();
        listSetFreeMethod(server.db[j].defrag_later,(void (*)(void*))sdsfree);
    }
    evictionPoolAlloc(); /* Initialize the LRU keys pool. */
    /* Note that server.pubsub_channels was chosen to be a kvstore (with only one dict, which
     * seems odd) just to make the code cleaner by making it be the same type as server.pubsubshard_channels
     * (which has to be kvstore), see pubsubtype.serverPubSubChannels */
    server.pubsub_channels = kvstoreCreate(&objToDictDictType, 0, KVSTORE_ALLOCATE_DICTS_ON_DEMAND);
    server.pubsub_patterns = dictCreate(&objToDictDictType);
    server.pubsubshard_channels = kvstoreCreate(&objToDictDictType, slot_count_bits, KVSTORE_ALLOCATE_DICTS_ON_DEMAND | KVSTORE_FREE_EMPTY_DICTS);
    server.pubsub_clients = 0;
    server.watching_clients = 0;
    server.cronloops = 0;
    server.in_exec = 0;
    server.busy_module_yield_flags = BUSY_MODULE_YIELD_NONE;
    server.busy_module_yield_reply = NULL;
    server.client_pause_in_transaction = 0;
    server.child_pid = -1;
    server.child_type = CHILD_TYPE_NONE;
    server.rdb_child_type = RDB_CHILD_TYPE_NONE;
    server.rdb_pipe_conns = NULL;
    server.rdb_pipe_numconns = 0;
    server.rdb_pipe_numconns_writing = 0;
    server.rdb_pipe_buff = NULL;
    server.rdb_pipe_bufflen = 0;
    server.rdb_bgsave_scheduled = 0;
    server.child_info_pipe[0] = -1;
    server.child_info_pipe[1] = -1;
    server.child_info_nread = 0;
    server.aof_buf = sdsempty();
    server.lastsave = time(NULL); /* At startup we consider the DB saved. */
    server.lastbgsave_try = 0;    /* At startup we never tried to BGSAVE. */
    server.rdb_save_time_last = -1;
    server.rdb_save_time_start = -1;
    server.rdb_last_load_keys_expired = 0;
    server.rdb_last_load_keys_loaded = 0;
    server.dirty = 0;
    resetServerStats();
    /* A few stats we don't want to reset: server startup time, and peak mem. */
    server.stat_starttime = time(NULL);
    server.stat_peak_memory = 0;
    server.stat_current_cow_peak = 0;
    server.stat_current_cow_bytes = 0;
    server.stat_current_cow_updated = 0;
    server.stat_current_save_keys_processed = 0;
    server.stat_current_save_keys_total = 0;
    server.stat_rdb_cow_bytes = 0;
    server.stat_aof_cow_bytes = 0;
    server.stat_module_cow_bytes = 0;
    server.stat_module_progress = 0;
    for (int j = 0; j < CLIENT_TYPE_COUNT; j++)
        server.stat_clients_type_memory[j] = 0;
    server.stat_cluster_links_memory = 0;
    server.cron_malloc_stats.zmalloc_used = 0;
    server.cron_malloc_stats.process_rss = 0;
    server.cron_malloc_stats.allocator_allocated = 0;
    server.cron_malloc_stats.allocator_active = 0;
    server.cron_malloc_stats.allocator_resident = 0;
    server.lastbgsave_status = C_OK;
    server.aof_last_write_status = C_OK;
    server.aof_last_write_errno = 0;
    server.repl_good_slaves_count = 0;
    server.last_sig_received = 0;

    /* Initiate acl info struct */
    server.acl_info.invalid_cmd_accesses = 0;
    server.acl_info.invalid_key_accesses  = 0;
    server.acl_info.user_auth_failures = 0;
    server.acl_info.invalid_channel_accesses = 0;

    /* Create the timer callback, this is our way to process many background
     * operations incrementally, like clients timeout, eviction of unaccessed
     * expired keys and so forth. */
    if (aeCreateTimeEvent(server.el, 1, serverCron, NULL, NULL) == AE_ERR) {
        serverPanic("Can't create event loop timers.");
        exit(1);
    }

    /* Register a readable event for the pipe used to awake the event loop
     * from module threads. */
    if (aeCreateFileEvent(server.el, server.module_pipe[0], AE_READABLE,
        modulePipeReadable,NULL) == AE_ERR) {
            serverPanic(
                "Error registering the readable event for the module pipe.");
    }

    /* Register before and after sleep handlers (note this needs to be done
     * before loading persistence since it is used by processEventsWhileBlocked. */
    aeSetBeforeSleepProc(server.el,beforeSleep);
    aeSetAfterSleepProc(server.el,afterSleep);

    /* 32 bit instances are limited to 4GB of address space, so if there is
     * no explicit limit in the user provided configuration we set a limit
     * at 3 GB using maxmemory with 'noeviction' policy'. This avoids
     * useless crashes of the instance for out of memory. */
    if (server.arch_bits == 32 && server.maxmemory == 0) {
        serverLog(LL_WARNING,"Warning: 32 bit instance detected but no memory limit set. Setting 3 GB maxmemory limit with 'noeviction' policy now.");
        server.maxmemory = 3072LL*(1024*1024); /* 3 GB */
        server.maxmemory_policy = MAXMEMORY_NO_EVICTION;
    }

    scriptingInit(1);
    if (functionsInit() == C_ERR) {
        serverPanic("Functions initialization failed, check the server logs.");
        exit(1);
    }
    slowlogInit();
    latencyMonitorInit();

    /* Initialize ACL default password if it exists */
    ACLUpdateDefaultUserPassword(server.requirepass);

    applyWatchdogPeriod();

    if (server.maxmemory_clients != 0)
        initServerClientMemUsageBuckets();
}

void initListeners(void) {
    /* Setup listeners from server config for TCP/TLS/Unix */
    int conn_index;
    connListener *listener;
    if (server.port != 0) {
        conn_index = connectionIndexByType(CONN_TYPE_SOCKET);
        if (conn_index < 0)
            serverPanic("Failed finding connection listener of %s", CONN_TYPE_SOCKET);
        listener = &server.listeners[conn_index];
        listener->bindaddr = server.bindaddr;
        listener->bindaddr_count = server.bindaddr_count;
        listener->port = server.port;
        listener->ct = connectionByType(CONN_TYPE_SOCKET);
    }

    if (server.tls_port || server.tls_replication || server.tls_cluster) {
        ConnectionType *ct_tls = connectionTypeTls();
        if (!ct_tls) {
            serverLog(LL_WARNING, "Failed finding TLS support.");
            exit(1);
        }
        if (connTypeConfigure(ct_tls, &server.tls_ctx_config, 1) == C_ERR) {
            serverLog(LL_WARNING, "Failed to configure TLS. Check logs for more info.");
            exit(1);
        }
    }

    if (server.tls_port != 0) {
        conn_index = connectionIndexByType(CONN_TYPE_TLS);
        if (conn_index < 0)
            serverPanic("Failed finding connection listener of %s", CONN_TYPE_TLS);
        listener = &server.listeners[conn_index];
        listener->bindaddr = server.bindaddr;
        listener->bindaddr_count = server.bindaddr_count;
        listener->port = server.tls_port;
        listener->ct = connectionByType(CONN_TYPE_TLS);
    }
    if (server.unixsocket != NULL) {
        conn_index = connectionIndexByType(CONN_TYPE_UNIX);
        if (conn_index < 0)
            serverPanic("Failed finding connection listener of %s", CONN_TYPE_UNIX);
        listener = &server.listeners[conn_index];
        listener->bindaddr = &server.unixsocket;
        listener->bindaddr_count = 1;
        listener->ct = connectionByType(CONN_TYPE_UNIX);
        listener->priv = &server.unixsocketperm; /* Unix socket specified */
    }

    /* create all the configured listener, and add handler to start to accept */
    int listen_fds = 0;
    for (int j = 0; j < CONN_TYPE_MAX; j++) {
        listener = &server.listeners[j];
        if (listener->ct == NULL)
            continue;

        if (connListen(listener) == C_ERR) {
            serverLog(LL_WARNING, "Failed listening on port %u (%s), aborting.", listener->port, listener->ct->get_type(NULL));
            exit(1);
        }

        if (createSocketAcceptHandler(listener, connAcceptHandler(listener->ct)) != C_OK)
            serverPanic("Unrecoverable error creating %s listener accept handler.", listener->ct->get_type(NULL));

       listen_fds += listener->count;
    }

    if (listen_fds == 0) {
        serverLog(LL_WARNING, "Configured to not listen anywhere, exiting.");
        exit(1);
    }
}

/* Some steps in server initialization need to be done last (after modules
 * are loaded).
 * Specifically, creation of threads due to a race bug in ld.so, in which
 * Thread Local Storage initialization collides with dlopen call.
 * see: https://sourceware.org/bugzilla/show_bug.cgi?id=19329 */
void InitServerLast(void) {
    bioInit();
    initThreadedIO();
    set_jemalloc_bg_thread(server.jemalloc_bg_thread);
    server.initial_memory_usage = zmalloc_used_memory();
}

/* The purpose of this function is to try to "glue" consecutive range
 * key specs in order to build the legacy (first,last,step) spec
 * used by the COMMAND command.
 * By far the most common case is just one range spec (e.g. SET)
 * but some commands' ranges were split into two or more ranges
 * in order to have different flags for different keys (e.g. SMOVE,
 * first key is "RW ACCESS DELETE", second key is "RW INSERT").
 *
 * Additionally set the CMD_MOVABLE_KEYS flag for commands that may have key
 * names in their arguments, but the legacy range spec doesn't cover all of them.
 *
 * This function uses very basic heuristics and is "best effort":
 * 1. Only commands which have only "range" specs are considered.
 * 2. Only range specs with keystep of 1 are considered.
 * 3. The order of the range specs must be ascending (i.e.
 *    lastkey of spec[i] == firstkey-1 of spec[i+1]).
 *
 * This function will succeed on all native commands and may
 * fail on module commands, even if it only has "range" specs that
 * could actually be "glued", in the following cases:
 * 1. The order of "range" specs is not ascending (e.g. the spec for
 *    the key at index 2 was added before the spec of the key at
 *    index 1).
 * 2. The "range" specs have keystep >1.
 *
 * If this functions fails it means that the legacy (first,last,step)
 * spec used by COMMAND will show 0,0,0. This is not a dire situation
 * because anyway the legacy (first,last,step) spec is to be deprecated
 * and one should use the new key specs scheme.
 */
void populateCommandLegacyRangeSpec(struct serverCommand *c) {
    memset(&c->legacy_range_key_spec, 0, sizeof(c->legacy_range_key_spec));

    /* Set the movablekeys flag if we have a GETKEYS flag for modules.
     * Note that for native commands, we always have keyspecs,
     * with enough information to rely on for movablekeys. */
    if (c->flags & CMD_MODULE_GETKEYS)
        c->flags |= CMD_MOVABLE_KEYS;

    /* no key-specs, no keys, exit. */
    if (c->key_specs_num == 0) {
        return;
    }

    if (c->key_specs_num == 1 &&
        c->key_specs[0].begin_search_type == KSPEC_BS_INDEX &&
        c->key_specs[0].find_keys_type == KSPEC_FK_RANGE)
    {
        /* Quick win, exactly one range spec. */
        c->legacy_range_key_spec = c->key_specs[0];
        /* If it has the incomplete flag, set the movablekeys flag on the command. */
        if (c->key_specs[0].flags & CMD_KEY_INCOMPLETE)
            c->flags |= CMD_MOVABLE_KEYS;
        return;
    }

    int firstkey = INT_MAX, lastkey = 0;
    int prev_lastkey = 0;
    for (int i = 0; i < c->key_specs_num; i++) {
        if (c->key_specs[i].begin_search_type != KSPEC_BS_INDEX ||
            c->key_specs[i].find_keys_type != KSPEC_FK_RANGE)
        {
            /* Found an incompatible (non range) spec, skip it, and set the movablekeys flag. */
            c->flags |= CMD_MOVABLE_KEYS;
            continue;
        }
        if (c->key_specs[i].fk.range.keystep != 1 ||
            (prev_lastkey && prev_lastkey != c->key_specs[i].bs.index.pos-1))
        {
            /* Found a range spec that's not plain (step of 1) or not consecutive to the previous one.
             * Skip it, and we set the movablekeys flag. */
            c->flags |= CMD_MOVABLE_KEYS;
            continue;
        }
        if (c->key_specs[i].flags & CMD_KEY_INCOMPLETE) {
            /* The spec we're using is incomplete, we can use it, but we also have to set the movablekeys flag. */
            c->flags |= CMD_MOVABLE_KEYS;
        }
        firstkey = min(firstkey, c->key_specs[i].bs.index.pos);
        /* Get the absolute index for lastkey (in the "range" spec, lastkey is relative to firstkey) */
        int lastkey_abs_index = c->key_specs[i].fk.range.lastkey;
        if (lastkey_abs_index >= 0)
            lastkey_abs_index += c->key_specs[i].bs.index.pos;
        /* For lastkey we use unsigned comparison to handle negative values correctly */
        lastkey = max((unsigned)lastkey, (unsigned)lastkey_abs_index);
        prev_lastkey = lastkey;
    }

    if (firstkey == INT_MAX) {
        /* Couldn't find range specs, the legacy range spec will remain empty, and we set the movablekeys flag. */
        c->flags |= CMD_MOVABLE_KEYS;
        return;
    }

    serverAssert(firstkey != 0);
    serverAssert(lastkey != 0);

    c->legacy_range_key_spec.begin_search_type = KSPEC_BS_INDEX;
    c->legacy_range_key_spec.bs.index.pos = firstkey;
    c->legacy_range_key_spec.find_keys_type = KSPEC_FK_RANGE;
    c->legacy_range_key_spec.fk.range.lastkey = lastkey < 0 ? lastkey : (lastkey-firstkey); /* in the "range" spec, lastkey is relative to firstkey */
    c->legacy_range_key_spec.fk.range.keystep = 1;
    c->legacy_range_key_spec.fk.range.limit = 0;
}

sds catSubCommandFullname(const char *parent_name, const char *sub_name) {
    return sdscatfmt(sdsempty(), "%s|%s", parent_name, sub_name);
}

void commandAddSubcommand(struct serverCommand *parent, struct serverCommand *subcommand, const char *declared_name) {
    if (!parent->subcommands_dict)
        parent->subcommands_dict = dictCreate(&commandTableDictType);

    subcommand->parent = parent; /* Assign the parent command */
    subcommand->id = ACLGetCommandID(subcommand->fullname); /* Assign the ID used for ACL. */

    serverAssert(dictAdd(parent->subcommands_dict, sdsnew(declared_name), subcommand) == DICT_OK);
}

/* Set implicit ACl categories (see comment above the definition of
 * struct serverCommand). */
void setImplicitACLCategories(struct serverCommand *c) {
    if (c->flags & CMD_WRITE)
        c->acl_categories |= ACL_CATEGORY_WRITE;
    /* Exclude scripting commands from the RO category. */
    if (c->flags & CMD_READONLY && !(c->acl_categories & ACL_CATEGORY_SCRIPTING))
        c->acl_categories |= ACL_CATEGORY_READ;
    if (c->flags & CMD_ADMIN)
        c->acl_categories |= ACL_CATEGORY_ADMIN|ACL_CATEGORY_DANGEROUS;
    if (c->flags & CMD_PUBSUB)
        c->acl_categories |= ACL_CATEGORY_PUBSUB;
    if (c->flags & CMD_FAST)
        c->acl_categories |= ACL_CATEGORY_FAST;
    if (c->flags & CMD_BLOCKING)
        c->acl_categories |= ACL_CATEGORY_BLOCKING;

    /* If it's not @fast is @slow in this binary world. */
    if (!(c->acl_categories & ACL_CATEGORY_FAST))
        c->acl_categories |= ACL_CATEGORY_SLOW;
}

/* Recursively populate the command structure.
 *
 * On success, the function return C_OK. Otherwise C_ERR is returned and we won't
 * add this command in the commands dict. */
int populateCommandStructure(struct serverCommand *c) {
    /* If the command marks with CMD_SENTINEL, it exists in sentinel. */
    if (!(c->flags & CMD_SENTINEL) && server.sentinel_mode)
        return C_ERR;

    /* If the command marks with CMD_ONLY_SENTINEL, it only exists in sentinel. */
    if (c->flags & CMD_ONLY_SENTINEL && !server.sentinel_mode)
        return C_ERR;

    /* Translate the command string flags description into an actual
     * set of flags. */
    setImplicitACLCategories(c);

    /* We start with an unallocated histogram and only allocate memory when a command
     * has been issued for the first time */
    c->latency_histogram = NULL;

    /* Handle the legacy range spec and the "movablekeys" flag (must be done after populating all key specs). */
    populateCommandLegacyRangeSpec(c);

    /* Assign the ID used for ACL. */
    c->id = ACLGetCommandID(c->fullname);

    /* Handle subcommands */
    if (c->subcommands) {
        for (int j = 0; c->subcommands[j].declared_name; j++) {
            struct serverCommand *sub = c->subcommands+j;

            sub->fullname = catSubCommandFullname(c->declared_name, sub->declared_name);
            if (populateCommandStructure(sub) == C_ERR)
                continue;

            commandAddSubcommand(c, sub, sub->declared_name);
        }
    }

    return C_OK;
}

extern struct serverCommand serverCommandTable[];

/* Populates the Command Table dict from the static table in commands.c
 * which is auto generated from the json files in the commands folder. */
void populateCommandTable(void) {
    int j;
    struct serverCommand *c;

    for (j = 0;; j++) {
        c = serverCommandTable + j;
        if (c->declared_name == NULL)
            break;

        int retval1, retval2;

        c->fullname = sdsnew(c->declared_name);
        if (populateCommandStructure(c) == C_ERR)
            continue;

        retval1 = dictAdd(server.commands, sdsdup(c->fullname), c);
        /* Populate an additional dictionary that will be unaffected
         * by rename-command statements in valkey.conf. */
        retval2 = dictAdd(server.orig_commands, sdsdup(c->fullname), c);
        serverAssert(retval1 == DICT_OK && retval2 == DICT_OK);
    }
}

void resetCommandTableStats(dict* commands) {
    struct serverCommand *c;
    dictEntry *de;
    dictIterator *di;

    di = dictGetSafeIterator(commands);
    while((de = dictNext(di)) != NULL) {
        c = (struct serverCommand *) dictGetVal(de);
        c->microseconds = 0;
        c->calls = 0;
        c->rejected_calls = 0;
        c->failed_calls = 0;
        if(c->latency_histogram) {
            hdr_close(c->latency_histogram);
            c->latency_histogram = NULL;
        }
        if (c->subcommands_dict)
            resetCommandTableStats(c->subcommands_dict);
    }
    dictReleaseIterator(di);
}

void resetErrorTableStats(void) {
    freeErrorsRadixTreeAsync(server.errors);
    server.errors = raxNew();
    server.errors_enabled = 1;
}

/* ========================== OP Array API ============================ */

int serverOpArrayAppend(serverOpArray *oa, int dbid, robj **argv, int argc, int target) {
    serverOp *op;
    int prev_capacity = oa->capacity;

    if (oa->numops == 0) {
        oa->capacity = 16;
    } else if (oa->numops >= oa->capacity) {
        oa->capacity *= 2;
    }

    if (prev_capacity != oa->capacity)
        oa->ops = zrealloc(oa->ops,sizeof(serverOp)*oa->capacity);
    op = oa->ops+oa->numops;
    op->dbid = dbid;
    op->argv = argv;
    op->argc = argc;
    op->target = target;
    oa->numops++;
    return oa->numops;
}

void serverOpArrayFree(serverOpArray *oa) {
    while(oa->numops) {
        int j;
        serverOp *op;

        oa->numops--;
        op = oa->ops+oa->numops;
        for (j = 0; j < op->argc; j++)
            decrRefCount(op->argv[j]);
        zfree(op->argv);
    }
    /* no need to free the actual op array, we reuse the memory for future commands */
    serverAssert(!oa->numops);
}

/* ====================== Commands lookup and execution ===================== */

int isContainerCommandBySds(sds s) {
    struct serverCommand *base_cmd = dictFetchValue(server.commands, s);
    int has_subcommands = base_cmd && base_cmd->subcommands_dict;
    return has_subcommands;
}

struct serverCommand *lookupSubcommand(struct serverCommand *container, sds sub_name) {
    return dictFetchValue(container->subcommands_dict, sub_name);
}

/* Look up a command by argv and argc
 *
 * If `strict` is not 0 we expect argc to be exact (i.e. argc==2
 * for a subcommand and argc==1 for a top-level command)
 * `strict` should be used every time we want to look up a command
 * name (e.g. in COMMAND INFO) rather than to find the command
 * a user requested to execute (in processCommand).
 */
struct serverCommand *lookupCommandLogic(dict *commands, robj **argv, int argc, int strict) {
    struct serverCommand *base_cmd = dictFetchValue(commands, argv[0]->ptr);
    int has_subcommands = base_cmd && base_cmd->subcommands_dict;
    if (argc == 1 || !has_subcommands) {
        if (strict && argc != 1)
            return NULL;
        /* Note: It is possible that base_cmd->proc==NULL (e.g. CONFIG) */
        return base_cmd;
    } else { /* argc > 1 && has_subcommands */
        if (strict && argc != 2)
            return NULL;
        /* Note: Currently we support just one level of subcommands */
        return lookupSubcommand(base_cmd, argv[1]->ptr);
    }
}

struct serverCommand *lookupCommand(robj **argv, int argc) {
    return lookupCommandLogic(server.commands,argv,argc,0);
}

struct serverCommand *lookupCommandBySdsLogic(dict *commands, sds s) {
    int argc, j;
    sds *strings = sdssplitlen(s,sdslen(s),"|",1,&argc);
    if (strings == NULL)
        return NULL;
    if (argc < 1 || argc > 2) {
        /* Currently we support just one level of subcommands */
        sdsfreesplitres(strings,argc);
        return NULL;
    }

    serverAssert(argc > 0); /* Avoid warning `-Wmaybe-uninitialized` in lookupCommandLogic() */
    robj objects[argc];
    robj *argv[argc];
    for (j = 0; j < argc; j++) {
        initStaticStringObject(objects[j],strings[j]);
        argv[j] = &objects[j];
    }

    struct serverCommand *cmd = lookupCommandLogic(commands,argv,argc,1);
    sdsfreesplitres(strings,argc);
    return cmd;
}

struct serverCommand *lookupCommandBySds(sds s) {
    return lookupCommandBySdsLogic(server.commands,s);
}

struct serverCommand *lookupCommandByCStringLogic(dict *commands, const char *s) {
    struct serverCommand *cmd;
    sds name = sdsnew(s);

    cmd = lookupCommandBySdsLogic(commands,name);
    sdsfree(name);
    return cmd;
}

struct serverCommand *lookupCommandByCString(const char *s) {
    return lookupCommandByCStringLogic(server.commands,s);
}

/* Lookup the command in the current table, if not found also check in
 * the original table containing the original command names unaffected by
 * valkey.conf rename-command statement.
 *
 * This is used by functions rewriting the argument vector such as
 * rewriteClientCommandVector() in order to set client->cmd pointer
 * correctly even if the command was renamed. */
struct serverCommand *lookupCommandOrOriginal(robj **argv ,int argc) {
    struct serverCommand *cmd = lookupCommandLogic(server.commands, argv, argc, 0);

    if (!cmd) cmd = lookupCommandLogic(server.orig_commands, argv, argc, 0);
    return cmd;
}

/* Commands arriving from the master client or AOF client, should never be rejected. */
int mustObeyClient(client *c) {
    return c->id == CLIENT_ID_AOF || c->flags & CLIENT_MASTER;
}

static int shouldPropagate(int target) {
    if (!server.replication_allowed || target == PROPAGATE_NONE || server.loading)
        return 0;

    if (target & PROPAGATE_AOF) {
        if (server.aof_state != AOF_OFF)
            return 1;
    }
    if (target & PROPAGATE_REPL) {
        if (server.masterhost == NULL && (server.repl_backlog || listLength(server.slaves) != 0))
            return 1;
    }

    return 0;
}

/* Propagate the specified command (in the context of the specified database id)
 * to AOF and Slaves.
 *
 * flags are an xor between:
 * + PROPAGATE_NONE (no propagation of command at all)
 * + PROPAGATE_AOF (propagate into the AOF file if is enabled)
 * + PROPAGATE_REPL (propagate into the replication link)
 *
 * This is an internal low-level function and should not be called!
 *
 * The API for propagating commands is alsoPropagate().
 *
 * dbid value of -1 is saved to indicate that the called do not want
 * to replicate SELECT for this command (used for database neutral commands).
 */
static void propagateNow(int dbid, robj **argv, int argc, int target) {
    if (!shouldPropagate(target))
        return;

    /* This needs to be unreachable since the dataset should be fixed during
     * replica pause (otherwise data may be lost during a failover) */
    serverAssert(!(isPausedActions(PAUSE_ACTION_REPLICA) &&
                   (!server.client_pause_in_transaction)));

    if (server.aof_state != AOF_OFF && target & PROPAGATE_AOF)
        feedAppendOnlyFile(dbid,argv,argc);
    if (target & PROPAGATE_REPL)
        replicationFeedSlaves(server.slaves,dbid,argv,argc);
}

/* Used inside commands to schedule the propagation of additional commands
 * after the current command is propagated to AOF / Replication.
 *
 * dbid is the database ID the command should be propagated into.
 * Arguments of the command to propagate are passed as an array of
 * Objects pointers of len 'argc', using the 'argv' vector.
 *
 * The function does not take a reference to the passed 'argv' vector,
 * so it is up to the caller to release the passed argv (but it is usually
 * stack allocated).  The function automatically increments ref count of
 * passed objects, so the caller does not need to. */
void alsoPropagate(int dbid, robj **argv, int argc, int target) {
    robj **argvcopy;
    int j;

    if (!shouldPropagate(target))
        return;

    argvcopy = zmalloc(sizeof(robj*)*argc);
    for (j = 0; j < argc; j++) {
        argvcopy[j] = argv[j];
        incrRefCount(argv[j]);
    }
    serverOpArrayAppend(&server.also_propagate,dbid,argvcopy,argc,target);
}

/* It is possible to call the function forceCommandPropagation() inside a
 * command implementation in order to to force the propagation of a
 * specific command execution into AOF / Replication. */
void forceCommandPropagation(client *c, int flags) {
    serverAssert(c->cmd->flags & (CMD_WRITE | CMD_MAY_REPLICATE));
    if (flags & PROPAGATE_REPL) c->flags |= CLIENT_FORCE_REPL;
    if (flags & PROPAGATE_AOF) c->flags |= CLIENT_FORCE_AOF;
}

/* Avoid that the executed command is propagated at all. This way we
 * are free to just propagate what we want using the alsoPropagate()
 * API. */
void preventCommandPropagation(client *c) {
    c->flags |= CLIENT_PREVENT_PROP;
}

/* AOF specific version of preventCommandPropagation(). */
void preventCommandAOF(client *c) {
    c->flags |= CLIENT_PREVENT_AOF_PROP;
}

/* Replication specific version of preventCommandPropagation(). */
void preventCommandReplication(client *c) {
    c->flags |= CLIENT_PREVENT_REPL_PROP;
}

/* Log the last command a client executed into the slowlog. */
void slowlogPushCurrentCommand(client *c, struct serverCommand *cmd, ustime_t duration) {
    /* Some commands may contain sensitive data that should not be available in the slowlog. */
    if (cmd->flags & CMD_SKIP_SLOWLOG)
        return;

    /* If command argument vector was rewritten, use the original
     * arguments. */
    robj **argv = c->original_argv ? c->original_argv : c->argv;
    int argc = c->original_argv ? c->original_argc : c->argc;
    slowlogPushEntryIfNeeded(c,argv,argc,duration);
}

/* This function is called in order to update the total command histogram duration.
 * The latency unit is nano-seconds.
 * If needed it will allocate the histogram memory and trim the duration to the upper/lower tracking limits*/
void updateCommandLatencyHistogram(struct hdr_histogram **latency_histogram, int64_t duration_hist){
    if (duration_hist < LATENCY_HISTOGRAM_MIN_VALUE)
        duration_hist=LATENCY_HISTOGRAM_MIN_VALUE;
    if (duration_hist>LATENCY_HISTOGRAM_MAX_VALUE)
        duration_hist=LATENCY_HISTOGRAM_MAX_VALUE;
    if (*latency_histogram==NULL)
        hdr_init(LATENCY_HISTOGRAM_MIN_VALUE,LATENCY_HISTOGRAM_MAX_VALUE,LATENCY_HISTOGRAM_PRECISION,latency_histogram);
    hdr_record_value(*latency_histogram,duration_hist);
}

/* Handle the alsoPropagate() API to handle commands that want to propagate
 * multiple separated commands. Note that alsoPropagate() is not affected
 * by CLIENT_PREVENT_PROP flag. */
static void propagatePendingCommands(void) {
    if (server.also_propagate.numops == 0)
        return;

    int j;
    serverOp *rop;

    /* If we got here it means we have finished an execution-unit.
     * If that unit has caused propagation of multiple commands, they
     * should be propagated as a transaction */
    int transaction = server.also_propagate.numops > 1;

    /* In case a command that may modify random keys was run *directly*
     * (i.e. not from within a script, MULTI/EXEC, RM_Call, etc.) we want
     * to avoid using a transaction (much like active-expire) */
    if (server.current_client &&
        server.current_client->cmd &&
        server.current_client->cmd->flags & CMD_TOUCHES_ARBITRARY_KEYS)
    {
        transaction = 0;
    }

    if (transaction) {
        /* We use dbid=-1 to indicate we do not want to replicate SELECT.
         * It'll be inserted together with the next command (inside the MULTI) */
        propagateNow(-1,&shared.multi,1,PROPAGATE_AOF|PROPAGATE_REPL);
    }

    for (j = 0; j < server.also_propagate.numops; j++) {
        rop = &server.also_propagate.ops[j];
        serverAssert(rop->target);
        propagateNow(rop->dbid,rop->argv,rop->argc,rop->target);
    }

    if (transaction) {
        /* We use dbid=-1 to indicate we do not want to replicate select */
        propagateNow(-1,&shared.exec,1,PROPAGATE_AOF|PROPAGATE_REPL);
    }

    serverOpArrayFree(&server.also_propagate);
}

/* Performs operations that should be performed after an execution unit ends.
 * Execution unit is a code that should be done atomically.
 * Execution units can be nested and do not necessarily start with a server command.
 *
 * For example the following is a logical unit:
 *   active expire ->
 *      trigger del notification of some module ->
 *          accessing a key ->
 *              trigger key miss notification of some other module
 *
 * What we want to achieve is that the entire execution unit will be done atomically,
 * currently with respect to replication and post jobs, but in the future there might
 * be other considerations. So we basically want the `postUnitOperations` to trigger
 * after the entire chain finished. */
void postExecutionUnitOperations(void) {
    if (server.execution_nesting)
        return;

    firePostExecutionUnitJobs();

    /* If we are at the top-most call() and not inside a an active module
     * context (e.g. within a module timer) we can propagate what we accumulated. */
    propagatePendingCommands();

    /* Module subsystem post-execution-unit logic */
    modulePostExecutionUnitOperations();
}

/* Increment the command failure counters (either rejected_calls or failed_calls).
 * The decision which counter to increment is done using the flags argument, options are:
 * * ERROR_COMMAND_REJECTED - update rejected_calls
 * * ERROR_COMMAND_FAILED - update failed_calls
 *
 * The function also reset the prev_err_count to make sure we will not count the same error
 * twice, its possible to pass a NULL cmd value to indicate that the error was counted elsewhere.
 *
 * The function returns true if stats was updated and false if not. */
int incrCommandStatsOnError(struct serverCommand *cmd, int flags) {
    /* hold the prev error count captured on the last command execution */
    static long long prev_err_count = 0;
    int res = 0;
    if (cmd) {
        if ((server.stat_total_error_replies - prev_err_count) > 0) {
            if (flags & ERROR_COMMAND_REJECTED) {
                cmd->rejected_calls++;
                res = 1;
            } else if (flags & ERROR_COMMAND_FAILED) {
                cmd->failed_calls++;
                res = 1;
            }
        }
    }
    prev_err_count = server.stat_total_error_replies;
    return res;
}

/* Call() is the core of the server's execution of a command.
 *
 * The following flags can be passed:
 * CMD_CALL_NONE        No flags.
 * CMD_CALL_PROPAGATE_AOF   Append command to AOF if it modified the dataset
 *                          or if the client flags are forcing propagation.
 * CMD_CALL_PROPAGATE_REPL  Send command to slaves if it modified the dataset
 *                          or if the client flags are forcing propagation.
 * CMD_CALL_PROPAGATE   Alias for PROPAGATE_AOF|PROPAGATE_REPL.
 * CMD_CALL_FULL        Alias for SLOWLOG|STATS|PROPAGATE.
 *
 * The exact propagation behavior depends on the client flags.
 * Specifically:
 *
 * 1. If the client flags CLIENT_FORCE_AOF or CLIENT_FORCE_REPL are set
 *    and assuming the corresponding CMD_CALL_PROPAGATE_AOF/REPL is set
 *    in the call flags, then the command is propagated even if the
 *    dataset was not affected by the command.
 * 2. If the client flags CLIENT_PREVENT_REPL_PROP or CLIENT_PREVENT_AOF_PROP
 *    are set, the propagation into AOF or to slaves is not performed even
 *    if the command modified the dataset.
 *
 * Note that regardless of the client flags, if CMD_CALL_PROPAGATE_AOF
 * or CMD_CALL_PROPAGATE_REPL are not set, then respectively AOF or
 * slaves propagation will never occur.
 *
 * Client flags are modified by the implementation of a given command
 * using the following API:
 *
 * forceCommandPropagation(client *c, int flags);
 * preventCommandPropagation(client *c);
 * preventCommandAOF(client *c);
 * preventCommandReplication(client *c);
 *
 */
void call(client *c, int flags) {
    long long dirty;
    uint64_t client_old_flags = c->flags;
    struct serverCommand *real_cmd = c->realcmd;
    client *prev_client = server.executing_client;
    server.executing_client = c;

    /* When call() is issued during loading the AOF we don't want commands called
     * from module, exec or LUA to go into the slowlog or to populate statistics. */
    int update_command_stats = !isAOFLoadingContext();

    /* We want to be aware of a client which is making a first time attempt to execute this command
     * and a client which is reprocessing command again (after being unblocked).
     * Blocked clients can be blocked in different places and not always it means the call() function has been
     * called. For example this is required for avoiding double logging to monitors.*/
    int reprocessing_command = flags & CMD_CALL_REPROCESSING;

    /* Initialization: clear the flags that must be set by the command on
     * demand, and initialize the array for additional commands propagation. */
    c->flags &= ~(CLIENT_FORCE_AOF|CLIENT_FORCE_REPL|CLIENT_PREVENT_PROP);

    /* The server core is in charge of propagation when the first entry point
     * of call() is processCommand().
     * The only other option to get to call() without having processCommand
     * as an entry point is if a module triggers RM_Call outside of call()
     * context (for example, in a timer).
     * In that case, the module is in charge of propagation. */

    /* Call the command. */
    dirty = server.dirty;
    long long old_master_repl_offset = server.master_repl_offset;
    incrCommandStatsOnError(NULL, 0);

    const long long call_timer = ustime();
    enterExecutionUnit(1, call_timer);

    /* setting the CLIENT_EXECUTING_COMMAND flag so we will avoid
     * sending client side caching message in the middle of a command reply.
     * In case of blocking commands, the flag will be un-set only after successfully
     * re-processing and unblock the client.*/
    c->flags |= CLIENT_EXECUTING_COMMAND;

    /* Setting the CLIENT_REPROCESSING_COMMAND flag so that during the actual
     * processing of the command proc, the client is aware that it is being
     * re-processed. */
    if (reprocessing_command) c->flags |= CLIENT_REPROCESSING_COMMAND;

    monotime monotonic_start = 0;
    if (monotonicGetType() == MONOTONIC_CLOCK_HW)
        monotonic_start = getMonotonicUs();

    c->cmd->proc(c);

    /* Clear the CLIENT_REPROCESSING_COMMAND flag after the proc is executed. */
    if (reprocessing_command) c->flags &= ~CLIENT_REPROCESSING_COMMAND;

    exitExecutionUnit();

    /* In case client is blocked after trying to execute the command,
     * it means the execution is not yet completed and we MIGHT reprocess the command in the future. */
    if (!(c->flags & CLIENT_BLOCKED)) c->flags &= ~(CLIENT_EXECUTING_COMMAND);

    /* In order to avoid performance implication due to querying the clock using a system call 3 times,
     * we use a monotonic clock, when we are sure its cost is very low, and fall back to non-monotonic call otherwise. */
    ustime_t duration;
    if (monotonicGetType() == MONOTONIC_CLOCK_HW)
        duration = getMonotonicUs() - monotonic_start;
    else
        duration = ustime() - call_timer;

    c->duration += duration;
    dirty = server.dirty-dirty;
    if (dirty < 0) dirty = 0;

    /* Update failed command calls if required. */

    if (!incrCommandStatsOnError(real_cmd, ERROR_COMMAND_FAILED) && c->deferred_reply_errors) {
        /* When call is used from a module client, error stats, and total_error_replies
         * isn't updated since these errors, if handled by the module, are internal,
         * and not reflected to users. however, the commandstats does show these calls
         * (made by RM_Call), so it should log if they failed or succeeded. */
        real_cmd->failed_calls++;
    }

    /* After executing command, we will close the client after writing entire
     * reply if it is set 'CLIENT_CLOSE_AFTER_COMMAND' flag. */
    if (c->flags & CLIENT_CLOSE_AFTER_COMMAND) {
        c->flags &= ~CLIENT_CLOSE_AFTER_COMMAND;
        c->flags |= CLIENT_CLOSE_AFTER_REPLY;
    }

    /* Note: the code below uses the real command that was executed
     * c->cmd and c->lastcmd may be different, in case of MULTI-EXEC or
     * re-written commands such as EXPIRE, GEOADD, etc. */

    /* Record the latency this command induced on the main thread.
     * unless instructed by the caller not to log. (happens when processing
     * a MULTI-EXEC from inside an AOF). */
    if (update_command_stats) {
        char *latency_event = (real_cmd->flags & CMD_FAST) ?
                               "fast-command" : "command";
        latencyAddSampleIfNeeded(latency_event,duration/1000);
        if (server.execution_nesting == 0)
            durationAddSample(EL_DURATION_TYPE_CMD, duration);
    }

    /* Log the command into the Slow log if needed.
     * If the client is blocked we will handle slowlog when it is unblocked. */
    if (update_command_stats && !(c->flags & CLIENT_BLOCKED))
        slowlogPushCurrentCommand(c, real_cmd, c->duration);

    /* Send the command to clients in MONITOR mode if applicable,
     * since some administrative commands are considered too dangerous to be shown.
     * Other exceptions is a client which is unblocked and retrying to process the command
     * or we are currently in the process of loading AOF. */
    if (update_command_stats && !reprocessing_command &&
        !(c->cmd->flags & (CMD_SKIP_MONITOR|CMD_ADMIN))) {
        robj **argv = c->original_argv ? c->original_argv : c->argv;
        int argc = c->original_argv ? c->original_argc : c->argc;
        replicationFeedMonitors(c,server.monitors,c->db->id,argv,argc);
    }

    /* Clear the original argv.
     * If the client is blocked we will handle slowlog when it is unblocked. */
    if (!(c->flags & CLIENT_BLOCKED))
        freeClientOriginalArgv(c);

    /* populate the per-command statistics that we show in INFO commandstats.
     * If the client is blocked we will handle latency stats and duration when it is unblocked. */
    if (update_command_stats && !(c->flags & CLIENT_BLOCKED)) {
        real_cmd->calls++;
        real_cmd->microseconds += c->duration;
        if (server.latency_tracking_enabled && !(c->flags & CLIENT_BLOCKED))
            updateCommandLatencyHistogram(&(real_cmd->latency_histogram), c->duration*1000);
    }

    /* The duration needs to be reset after each call except for a blocked command,
     * which is expected to record and reset the duration after unblocking. */
    if (!(c->flags & CLIENT_BLOCKED)) {
        c->duration = 0;
    }

    /* Propagate the command into the AOF and replication link.
     * We never propagate EXEC explicitly, it will be implicitly
     * propagated if needed (see propagatePendingCommands).
     * Also, module commands take care of themselves */
    if (flags & CMD_CALL_PROPAGATE &&
        (c->flags & CLIENT_PREVENT_PROP) != CLIENT_PREVENT_PROP &&
        c->cmd->proc != execCommand &&
        !(c->cmd->flags & CMD_MODULE))
    {
        int propagate_flags = PROPAGATE_NONE;

        /* Check if the command operated changes in the data set. If so
         * set for replication / AOF propagation. */
        if (dirty) propagate_flags |= (PROPAGATE_AOF|PROPAGATE_REPL);

        /* If the client forced AOF / replication of the command, set
         * the flags regardless of the command effects on the data set. */
        if (c->flags & CLIENT_FORCE_REPL) propagate_flags |= PROPAGATE_REPL;
        if (c->flags & CLIENT_FORCE_AOF) propagate_flags |= PROPAGATE_AOF;

        /* However prevent AOF / replication propagation if the command
         * implementation called preventCommandPropagation() or similar,
         * or if we don't have the call() flags to do so. */
        if (c->flags & CLIENT_PREVENT_REPL_PROP        ||
            c->flags & CLIENT_MODULE_PREVENT_REPL_PROP ||
            !(flags & CMD_CALL_PROPAGATE_REPL))
                propagate_flags &= ~PROPAGATE_REPL;
        if (c->flags & CLIENT_PREVENT_AOF_PROP        ||
            c->flags & CLIENT_MODULE_PREVENT_AOF_PROP ||
            !(flags & CMD_CALL_PROPAGATE_AOF))
                propagate_flags &= ~PROPAGATE_AOF;

        /* Call alsoPropagate() only if at least one of AOF / replication
         * propagation is needed. */
        if (propagate_flags != PROPAGATE_NONE)
            alsoPropagate(c->db->id,c->argv,c->argc,propagate_flags);
    }

    /* Restore the old replication flags, since call() can be executed
     * recursively. */
    c->flags &= ~(CLIENT_FORCE_AOF|CLIENT_FORCE_REPL|CLIENT_PREVENT_PROP);
    c->flags |= client_old_flags &
        (CLIENT_FORCE_AOF|CLIENT_FORCE_REPL|CLIENT_PREVENT_PROP);

    /* If the client has keys tracking enabled for client side caching,
     * make sure to remember the keys it fetched via this command. For read-only
     * scripts, don't process the script, only the commands it executes. */
    if ((c->cmd->flags & CMD_READONLY) && (c->cmd->proc != evalRoCommand)
        && (c->cmd->proc != evalShaRoCommand) && (c->cmd->proc != fcallroCommand))
    {
        /* We use the tracking flag of the original external client that
         * triggered the command, but we take the keys from the actual command
         * being executed. */
        if (server.current_client &&
            (server.current_client->flags & CLIENT_TRACKING) &&
            !(server.current_client->flags & CLIENT_TRACKING_BCAST))
        {
            trackingRememberKeys(server.current_client, c);
        }
    }

    if (!(c->flags & CLIENT_BLOCKED))
        server.stat_numcommands++;

    /* Record peak memory after each command and before the eviction that runs
     * before the next command. */
    size_t zmalloc_used = zmalloc_used_memory();
    if (zmalloc_used > server.stat_peak_memory)
        server.stat_peak_memory = zmalloc_used;

    /* Do some maintenance job and cleanup */
    afterCommand(c);

    /* Remember the replication offset of the client, right after its last
     * command that resulted in propagation. */
    if (old_master_repl_offset != server.master_repl_offset)
        c->woff = server.master_repl_offset;

    /* Client pause takes effect after a transaction has finished. This needs
     * to be located after everything is propagated. */
    if (!server.in_exec && server.client_pause_in_transaction) {
        server.client_pause_in_transaction = 0;
    }

    server.executing_client = prev_client;
}

/* Used when a command that is ready for execution needs to be rejected, due to
 * various pre-execution checks. it returns the appropriate error to the client.
 * If there's a transaction is flags it as dirty, and if the command is EXEC,
 * it aborts the transaction.
 * The duration is reset, since we reject the command, and it did not record.
 * Note: 'reply' is expected to end with \r\n */
void rejectCommand(client *c, robj *reply) {
    flagTransaction(c);
    c->duration = 0;
    if (c->cmd) c->cmd->rejected_calls++;
    if (c->cmd && c->cmd->proc == execCommand) {
        execCommandAbort(c, reply->ptr);
    } else {
        /* using addReplyError* rather than addReply so that the error can be logged. */
        addReplyErrorObject(c, reply);
    }
}

void rejectCommandSds(client *c, sds s) {
    flagTransaction(c);
    c->duration = 0;
    if (c->cmd) c->cmd->rejected_calls++;
    if (c->cmd && c->cmd->proc == execCommand) {
        execCommandAbort(c, s);
        sdsfree(s);
    } else {
        /* The following frees 's'. */
        addReplyErrorSds(c, s);
    }
}

void rejectCommandFormat(client *c, const char *fmt, ...) {
    va_list ap;
    va_start(ap,fmt);
    sds s = sdscatvprintf(sdsempty(),fmt,ap);
    va_end(ap);
    /* Make sure there are no newlines in the string, otherwise invalid protocol
     * is emitted (The args come from the user, they may contain any character). */
    sdsmapchars(s, "\r\n", "  ",  2);
    rejectCommandSds(c, s);
}

/* This is called after a command in call, we can do some maintenance job in it. */
void afterCommand(client *c) {
    UNUSED(c);
    /* Should be done before trackingHandlePendingKeyInvalidations so that we
     * reply to client before invalidating cache (makes more sense) */
    postExecutionUnitOperations();

    /* Flush pending tracking invalidations. */
    trackingHandlePendingKeyInvalidations();

    /* Flush other pending push messages. only when we are not in nested call.
     * So the messages are not interleaved with transaction response. */
    if (!server.execution_nesting)
        listJoin(c->reply, server.pending_push_messages);
}

/* Check if c->cmd exists, fills `err` with details in case it doesn't.
 * Return 1 if exists. */
int commandCheckExistence(client *c, sds *err) {
    if (c->cmd)
        return 1;
    if (!err)
        return 0;
    if (isContainerCommandBySds(c->argv[0]->ptr)) {
        /* If we can't find the command but argv[0] by itself is a command
         * it means we're dealing with an invalid subcommand. Print Help. */
        sds cmd = sdsnew((char *)c->argv[0]->ptr);
        sdstoupper(cmd);
        *err = sdsnew(NULL);
        *err = sdscatprintf(*err, "unknown subcommand '%.128s'. Try %s HELP.",
                            (char *)c->argv[1]->ptr, cmd);
        sdsfree(cmd);
    } else {
        sds args = sdsempty();
        int i;
        for (i=1; i < c->argc && sdslen(args) < 128; i++)
            args = sdscatprintf(args, "'%.*s' ", 128-(int)sdslen(args), (char*)c->argv[i]->ptr);
        *err = sdsnew(NULL);
        *err = sdscatprintf(*err, "unknown command '%.128s', with args beginning with: %s",
                            (char*)c->argv[0]->ptr, args);
        sdsfree(args);
    }
    /* Make sure there are no newlines in the string, otherwise invalid protocol
     * is emitted (The args come from the user, they may contain any character). */
    sdsmapchars(*err, "\r\n", "  ",  2);
    return 0;
}

/* Check if c->argc is valid for c->cmd, fills `err` with details in case it isn't.
 * Return 1 if valid. */
int commandCheckArity(client *c, sds *err) {
    if ((c->cmd->arity > 0 && c->cmd->arity != c->argc) ||
        (c->argc < -c->cmd->arity))
    {
        if (err) {
            *err = sdsnew(NULL);
            *err = sdscatprintf(*err, "wrong number of arguments for '%s' command", c->cmd->fullname);
        }
        return 0;
    }

    return 1;
}

/* If we're executing a script, try to extract a set of command flags from
 * it, in case it declared them. Note this is just an attempt, we don't yet
 * know the script command is well formed.*/
uint64_t getCommandFlags(client *c) {
    uint64_t cmd_flags = c->cmd->flags;

    if (c->cmd->proc == fcallCommand || c->cmd->proc == fcallroCommand) {
        cmd_flags = fcallGetCommandFlags(c, cmd_flags);
    } else if (c->cmd->proc == evalCommand || c->cmd->proc == evalRoCommand ||
               c->cmd->proc == evalShaCommand || c->cmd->proc == evalShaRoCommand)
    {
        cmd_flags = evalGetCommandFlags(c, cmd_flags);
    }

    return cmd_flags;
}

/* If this function gets called we already read a whole
 * command, arguments are in the client argv/argc fields.
 * processCommand() execute the command or prepare the
 * server for a bulk read from the client.
 *
 * If C_OK is returned the client is still alive and valid and
 * other operations can be performed by the caller. Otherwise
 * if C_ERR is returned the client was destroyed (i.e. after QUIT). */
int processCommand(client *c) {
    if (!scriptIsTimedout()) {
        /* Both EXEC and scripts call call() directly so there should be
         * no way in_exec or scriptIsRunning() is 1.
         * That is unless lua_timedout, in which case client may run
         * some commands. */
        serverAssert(!server.in_exec);
        serverAssert(!scriptIsRunning());
    }

    /* in case we are starting to ProcessCommand and we already have a command we assume
     * this is a reprocessing of this command, so we do not want to perform some of the actions again. */
    int client_reprocessing_command = c->cmd ? 1 : 0;

    /* only run command filter if not reprocessing command */
    if (!client_reprocessing_command) {
        moduleCallCommandFilters(c);
        reqresAppendRequest(c);
    }

    /* Handle possible security attacks. */
    if (!strcasecmp(c->argv[0]->ptr,"host:") || !strcasecmp(c->argv[0]->ptr,"post")) {
        securityWarningCommand(c);
        return C_ERR;
    }

    /* If we're inside a module blocked context yielding that wants to avoid
     * processing clients, postpone the command. */
    if (server.busy_module_yield_flags != BUSY_MODULE_YIELD_NONE &&
        !(server.busy_module_yield_flags & BUSY_MODULE_YIELD_CLIENTS))
    {
        blockPostponeClient(c);
        return C_OK;
    }

    /* Now lookup the command and check ASAP about trivial error conditions
     * such as wrong arity, bad command name and so forth.
     * In case we are reprocessing a command after it was blocked,
     * we do not have to repeat the same checks */
    if (!client_reprocessing_command) {
        c->cmd = c->lastcmd = c->realcmd = lookupCommand(c->argv,c->argc);
        sds err;
        if (!commandCheckExistence(c, &err)) {
            rejectCommandSds(c, err);
            return C_OK;
        }
        if (!commandCheckArity(c, &err)) {
            rejectCommandSds(c, err);
            return C_OK;
        }


        /* Check if the command is marked as protected and the relevant configuration allows it */
        if (c->cmd->flags & CMD_PROTECTED) {
            if ((c->cmd->proc == debugCommand && !allowProtectedAction(server.enable_debug_cmd, c)) ||
                (c->cmd->proc == moduleCommand && !allowProtectedAction(server.enable_module_cmd, c)))
            {
                rejectCommandFormat(c,"%s command not allowed. If the %s option is set to \"local\", "
                                      "you can run it from a local connection, otherwise you need to set this option "
                                      "in the configuration file, and then restart the server.",
                                      c->cmd->proc == debugCommand ? "DEBUG" : "MODULE",
                                      c->cmd->proc == debugCommand ? "enable-debug-command" : "enable-module-command");
                return C_OK;

            }
        }
    }

    uint64_t cmd_flags = getCommandFlags(c);

    int is_read_command = (cmd_flags & CMD_READONLY) ||
                           (c->cmd->proc == execCommand && (c->mstate.cmd_flags & CMD_READONLY));
    int is_write_command = (cmd_flags & CMD_WRITE) ||
                           (c->cmd->proc == execCommand && (c->mstate.cmd_flags & CMD_WRITE));
    int is_denyoom_command = (cmd_flags & CMD_DENYOOM) ||
                             (c->cmd->proc == execCommand && (c->mstate.cmd_flags & CMD_DENYOOM));
    int is_denystale_command = !(cmd_flags & CMD_STALE) ||
                               (c->cmd->proc == execCommand && (c->mstate.cmd_inv_flags & CMD_STALE));
    int is_denyloading_command = !(cmd_flags & CMD_LOADING) ||
                                 (c->cmd->proc == execCommand && (c->mstate.cmd_inv_flags & CMD_LOADING));
    int is_may_replicate_command = (cmd_flags & (CMD_WRITE | CMD_MAY_REPLICATE)) ||
                                   (c->cmd->proc == execCommand && (c->mstate.cmd_flags & (CMD_WRITE | CMD_MAY_REPLICATE)));
    int is_deny_async_loading_command = (cmd_flags & CMD_NO_ASYNC_LOADING) ||
                                        (c->cmd->proc == execCommand && (c->mstate.cmd_flags & CMD_NO_ASYNC_LOADING));
    int obey_client = mustObeyClient(c);

    if (authRequired(c)) {
        /* AUTH and HELLO and no auth commands are valid even in
         * non-authenticated state. */
        if (!(c->cmd->flags & CMD_NO_AUTH)) {
            rejectCommand(c,shared.noautherr);
            return C_OK;
        }
    }

    if (c->flags & CLIENT_MULTI && c->cmd->flags & CMD_NO_MULTI) {
        rejectCommandFormat(c,"Command not allowed inside a transaction");
        return C_OK;
    }

    /* Check if the user can run this command according to the current
     * ACLs. */
    int acl_errpos;
    int acl_retval = ACLCheckAllPerm(c,&acl_errpos);
    if (acl_retval != ACL_OK) {
        addACLLogEntry(c,acl_retval,(c->flags & CLIENT_MULTI) ? ACL_LOG_CTX_MULTI : ACL_LOG_CTX_TOPLEVEL,acl_errpos,NULL,NULL);
        sds msg = getAclErrorMessage(acl_retval, c->user, c->cmd, c->argv[acl_errpos]->ptr, 0);
        rejectCommandFormat(c, "-NOPERM %s", msg);
        sdsfree(msg);
        return C_OK;
    }

    /* If cluster is enabled perform the cluster redirection here.
     * However we don't perform the redirection if:
     * 1) The sender of this command is our master.
     * 2) The command has no key arguments. */
    if (server.cluster_enabled &&
        !mustObeyClient(c) &&
        !(!(c->cmd->flags&CMD_MOVABLE_KEYS) && c->cmd->key_specs_num == 0 &&
          c->cmd->proc != execCommand))
    {
        int error_code;
        clusterNode *n = getNodeByQuery(c,c->cmd,c->argv,c->argc,
                                        &c->slot,&error_code);
        if (n == NULL || !clusterNodeIsMyself(n)) {
            if (c->cmd->proc == execCommand) {
                discardTransaction(c);
            } else {
                flagTransaction(c);
            }
            clusterRedirectClient(c,n,c->slot,error_code);
            c->cmd->rejected_calls++;
            return C_OK;
        }
    }

    /* Disconnect some clients if total clients memory is too high. We do this
     * before key eviction, after the last command was executed and consumed
     * some client output buffer memory. */
    evictClients();
    if (server.current_client == NULL) {
        /* If we evicted ourself then abort processing the command */
        return C_ERR;
    }

    /* Handle the maxmemory directive.
     *
     * Note that we do not want to reclaim memory if we are here re-entering
     * the event loop since there is a busy Lua script running in timeout
     * condition, to avoid mixing the propagation of scripts with the
     * propagation of DELs due to eviction. */
    if (server.maxmemory && !isInsideYieldingLongCommand()) {
        int out_of_memory = (performEvictions() == EVICT_FAIL);

        /* performEvictions may evict keys, so we need flush pending tracking
         * invalidation keys. If we don't do this, we may get an invalidation
         * message after we perform operation on the key, where in fact this
         * message belongs to the old value of the key before it gets evicted.*/
        trackingHandlePendingKeyInvalidations();

        /* performEvictions may flush slave output buffers. This may result
         * in a slave, that may be the active client, to be freed. */
        if (server.current_client == NULL) return C_ERR;

        if (out_of_memory && is_denyoom_command) {
            rejectCommand(c, shared.oomerr);
            return C_OK;
        }

        /* Save out_of_memory result at command start, otherwise if we check OOM
         * in the first write within script, memory used by lua stack and
         * arguments might interfere. We need to save it for EXEC and module
         * calls too, since these can call EVAL, but avoid saving it during an
         * interrupted / yielding busy script / module. */
        server.pre_command_oom_state = out_of_memory;
    }

    /* Make sure to use a reasonable amount of memory for client side
     * caching metadata. */
    if (server.tracking_clients) trackingLimitUsedSlots();

    /* Don't accept write commands if there are problems persisting on disk
     * unless coming from our master, in which case check the replica ignore
     * disk write error config to either log or crash. */
    int deny_write_type = writeCommandsDeniedByDiskError();
    if (deny_write_type != DISK_ERROR_TYPE_NONE &&
        (is_write_command || c->cmd->proc == pingCommand))
    {
        if (obey_client) {
            if (!server.repl_ignore_disk_write_error && c->cmd->proc != pingCommand) {
                serverPanic("Replica was unable to write command to disk.");
            } else {
                static mstime_t last_log_time_ms = 0;
                const mstime_t log_interval_ms = 10000;
                if (server.mstime > last_log_time_ms + log_interval_ms) {
                    last_log_time_ms = server.mstime;
                    serverLog(LL_WARNING, "Replica is applying a command even though "
                                          "it is unable to write to disk.");
                }
            }
        } else {
            sds err = writeCommandsGetDiskErrorMessage(deny_write_type);
            /* remove the newline since rejectCommandSds adds it. */
            sdssubstr(err, 0, sdslen(err)-2);
            rejectCommandSds(c, err);
            return C_OK;
        }
    }

    /* Don't accept write commands if there are not enough good slaves and
     * user configured the min-slaves-to-write option. */
    if (is_write_command && !checkGoodReplicasStatus()) {
        rejectCommand(c, shared.noreplicaserr);
        return C_OK;
    }

    /* Don't accept write commands if this is a read only slave. But
     * accept write commands if this is our master. */
    if (server.masterhost && server.repl_slave_ro &&
        !obey_client &&
        is_write_command)
    {
        rejectCommand(c, shared.roslaveerr);
        return C_OK;
    }

    /* Only allow a subset of commands in the context of Pub/Sub if the
     * connection is in RESP2 mode. With RESP3 there are no limits. */
    if ((c->flags & CLIENT_PUBSUB && c->resp == 2) &&
        c->cmd->proc != pingCommand &&
        c->cmd->proc != subscribeCommand &&
        c->cmd->proc != ssubscribeCommand &&
        c->cmd->proc != unsubscribeCommand &&
        c->cmd->proc != sunsubscribeCommand &&
        c->cmd->proc != psubscribeCommand &&
        c->cmd->proc != punsubscribeCommand &&
        c->cmd->proc != quitCommand &&
        c->cmd->proc != resetCommand) {
        rejectCommandFormat(c,
            "Can't execute '%s': only (P|S)SUBSCRIBE / "
            "(P|S)UNSUBSCRIBE / PING / QUIT / RESET are allowed in this context",
            c->cmd->fullname);
        return C_OK;
    }

    /* Only allow commands with flag "t", such as INFO, REPLICAOF and so on,
     * when replica-serve-stale-data is no and we are a replica with a broken
     * link with master. */
    if (server.masterhost && server.repl_state != REPL_STATE_CONNECTED &&
        server.repl_serve_stale_data == 0 &&
        is_denystale_command)
    {
        rejectCommand(c, shared.masterdownerr);
        return C_OK;
    }

    /* Loading DB? Return an error if the command has not the
     * CMD_LOADING flag. */
    if (server.loading && !server.async_loading && is_denyloading_command) {
        rejectCommand(c, shared.loadingerr);
        return C_OK;
    }

    /* During async-loading, block certain commands. */
    if (server.async_loading && is_deny_async_loading_command) {
        rejectCommand(c,shared.loadingerr);
        return C_OK;
    }

    /* when a busy job is being done (script / module)
     * Only allow a limited number of commands.
     * Note that we need to allow the transactions commands, otherwise clients
     * sending a transaction with pipelining without error checking, may have
     * the MULTI plus a few initial commands refused, then the timeout
     * condition resolves, and the bottom-half of the transaction gets
     * executed, see Github PR #7022. */
    if (isInsideYieldingLongCommand() && !(c->cmd->flags & CMD_ALLOW_BUSY)) {
        if (server.busy_module_yield_flags && server.busy_module_yield_reply) {
            rejectCommandFormat(c, "-BUSY %s", server.busy_module_yield_reply);
        } else if (server.busy_module_yield_flags) {
            rejectCommand(c, shared.slowmoduleerr);
        } else if (scriptIsEval()) {
            rejectCommand(c, shared.slowevalerr);
        } else {
            rejectCommand(c, shared.slowscripterr);
        }
        return C_OK;
    }

    /* Prevent a replica from sending commands that access the keyspace.
     * The main objective here is to prevent abuse of client pause check
     * from which replicas are exempt. */
    if ((c->flags & CLIENT_SLAVE) && (is_may_replicate_command || is_write_command || is_read_command)) {
        rejectCommandFormat(c, "Replica can't interact with the keyspace");
        return C_OK;
    }

    /* If the server is paused, block the client until
     * the pause has ended. Replicas are never paused. */
    if (!(c->flags & CLIENT_SLAVE) && 
        ((isPausedActions(PAUSE_ACTION_CLIENT_ALL)) ||
        ((isPausedActions(PAUSE_ACTION_CLIENT_WRITE)) && is_may_replicate_command)))
    {
        blockPostponeClient(c);
        return C_OK;       
    }

    /* Exec the command */
    if (c->flags & CLIENT_MULTI &&
        c->cmd->proc != execCommand &&
        c->cmd->proc != discardCommand &&
        c->cmd->proc != multiCommand &&
        c->cmd->proc != watchCommand &&
        c->cmd->proc != quitCommand &&
        c->cmd->proc != resetCommand)
    {
        queueMultiCommand(c, cmd_flags);
        addReply(c,shared.queued);
    } else {
        int flags = CMD_CALL_FULL;
        if (client_reprocessing_command) flags |= CMD_CALL_REPROCESSING;
        call(c,flags);
        if (listLength(server.ready_keys) && !isInsideYieldingLongCommand())
            handleClientsBlockedOnKeys();
    }
    return C_OK;
}

/* ====================== Error lookup and execution ===================== */

/* Users who abuse lua error_reply will generate a new error object on each
 * error call, which can make server.errors get bigger and bigger. This will
 * cause the server to block when calling INFO (we also return errorstats by
 * default). To prevent the damage it can cause, when a misuse is detected,
 * we will print the warning log and disable the errorstats to avoid adding
 * more new errors. It can be re-enabled via CONFIG RESETSTAT. */
#define ERROR_STATS_NUMBER 128
void incrementErrorCount(const char *fullerr, size_t namelen) {
    /* errorstats is disabled, return ASAP. */
    if (!server.errors_enabled) return;

    void *result;
    if (!raxFind(server.errors,(unsigned char*)fullerr,namelen,&result)) {
        if (server.errors->numele >= ERROR_STATS_NUMBER) {
            sds errors = sdsempty();
            raxIterator ri;
            raxStart(&ri, server.errors);
            raxSeek(&ri, "^", NULL, 0);
            while (raxNext(&ri)) {
                char *tmpsafe;
                errors = sdscatlen(errors, getSafeInfoString((char *)ri.key, ri.key_len, &tmpsafe), ri.key_len);
                errors = sdscatlen(errors, ", ", 2);
                if (tmpsafe != NULL) zfree(tmpsafe);
            }
            sdsrange(errors, 0, -3); /* Remove final ", ". */
            raxStop(&ri);

            /* Print the warning log and the contents of server.errors to the log. */
            serverLog(LL_WARNING,
                      "Errorstats stopped adding new errors because the number of "
                      "errors reached the limit, may be misuse of lua error_reply, "
                      "please check INFO ERRORSTATS, this can be re-enabled via "
                      "CONFIG RESETSTAT.");
            serverLog(LL_WARNING, "Current errors code list: %s", errors);
            sdsfree(errors);

            /* Reset the errors and add a single element to indicate that it is disabled. */
            resetErrorTableStats();
            incrementErrorCount("ERRORSTATS_DISABLED", 19);
            server.errors_enabled = 0;
            return;
        }

        struct serverError *error = zmalloc(sizeof(*error));
        error->count = 1;
        raxInsert(server.errors,(unsigned char*)fullerr,namelen,error,NULL);
    } else {
        struct serverError *error = result;
        error->count++;
    }
}

/*================================== Shutdown =============================== */

/* Close listening sockets. Also unlink the unix domain socket if
 * unlink_unix_socket is non-zero. */
void closeListeningSockets(int unlink_unix_socket) {
    int j;

    for (int i = 0; i < CONN_TYPE_MAX; i++) {
        connListener *listener = &server.listeners[i];
        if (listener->ct == NULL)
            continue;

        for (j = 0; j < listener->count; j++) close(listener->fd[j]);
    }

    if (server.cluster_enabled)
        for (j = 0; j < server.clistener.count; j++) close(server.clistener.fd[j]);
    if (unlink_unix_socket && server.unixsocket) {
        serverLog(LL_NOTICE,"Removing the unix socket file.");
        if (unlink(server.unixsocket) != 0)
            serverLog(LL_WARNING,"Error removing the unix socket file: %s",strerror(errno));
    }
}

/* Prepare for shutting down the server. Flags:
 *
 * - SHUTDOWN_SAVE: Save a database dump even if the server is configured not to
 *   save any dump.
 *
 * - SHUTDOWN_NOSAVE: Don't save any database dump even if the server is
 *   configured to save one.
 *
 * - SHUTDOWN_NOW: Don't wait for replicas to catch up before shutting down.
 *
 * - SHUTDOWN_FORCE: Ignore errors writing AOF and RDB files on disk, which
 *   would normally prevent a shutdown.
 *
 * Unless SHUTDOWN_NOW is set and if any replicas are lagging behind, C_ERR is
 * returned and server.shutdown_mstime is set to a timestamp to allow a grace
 * period for the replicas to catch up. This is checked and handled by
 * serverCron() which completes the shutdown as soon as possible.
 *
 * If shutting down fails due to errors writing RDB or AOF files, C_ERR is
 * returned and an error is logged. If the flag SHUTDOWN_FORCE is set, these
 * errors are logged but ignored and C_OK is returned.
 *
 * On success, this function returns C_OK and then it's OK to call exit(0). */
int prepareForShutdown(int flags) {
    if (isShutdownInitiated()) return C_ERR;

    /* When SHUTDOWN is called while the server is loading a dataset in
     * memory we need to make sure no attempt is performed to save
     * the dataset on shutdown (otherwise it could overwrite the current DB
     * with half-read data).
     *
     * Also when in Sentinel mode clear the SAVE flag and force NOSAVE. */
    if (server.loading || server.sentinel_mode)
        flags = (flags & ~SHUTDOWN_SAVE) | SHUTDOWN_NOSAVE;

    server.shutdown_flags = flags;

    serverLog(LL_NOTICE,"User requested shutdown...");
    if (server.supervised_mode == SUPERVISED_SYSTEMD)
        serverCommunicateSystemd("STOPPING=1\n");

    /* If we have any replicas, let them catch up the replication offset before
     * we shut down, to avoid data loss. */
    if (!(flags & SHUTDOWN_NOW) &&
        server.shutdown_timeout != 0 &&
        !isReadyToShutdown())
    {
        server.shutdown_mstime = server.mstime + server.shutdown_timeout * 1000;
        if (!isPausedActions(PAUSE_ACTION_REPLICA)) sendGetackToReplicas();
        pauseActions(PAUSE_DURING_SHUTDOWN,
                      LLONG_MAX,
                     PAUSE_ACTIONS_CLIENT_WRITE_SET);
        serverLog(LL_NOTICE, "Waiting for replicas before shutting down.");
        return C_ERR;
    }

    return finishShutdown();
}

static inline int isShutdownInitiated(void) {
    return server.shutdown_mstime != 0;
}

/* Returns 0 if there are any replicas which are lagging in replication which we
 * need to wait for before shutting down. Returns 1 if we're ready to shut
 * down now. */
int isReadyToShutdown(void) {
    if (listLength(server.slaves) == 0) return 1;  /* No replicas. */

    listIter li;
    listNode *ln;
    listRewind(server.slaves, &li);
    while ((ln = listNext(&li)) != NULL) {
        client *replica = listNodeValue(ln);
        if (replica->repl_ack_off != server.master_repl_offset) return 0;
    }
    return 1;
}

static void cancelShutdown(void) {
    server.shutdown_asap = 0;
    server.shutdown_flags = 0;
    server.shutdown_mstime = 0;
    server.last_sig_received = 0;
    replyToClientsBlockedOnShutdown();
    unpauseActions(PAUSE_DURING_SHUTDOWN);
}

/* Returns C_OK if shutdown was aborted and C_ERR if shutdown wasn't ongoing. */
int abortShutdown(void) {
    if (isShutdownInitiated()) {
        cancelShutdown();
    } else if (server.shutdown_asap) {
        /* Signal handler has requested shutdown, but it hasn't been initiated
         * yet. Just clear the flag. */
        server.shutdown_asap = 0;
    } else {
        /* Shutdown neither initiated nor requested. */
        return C_ERR;
    }
    serverLog(LL_NOTICE, "Shutdown manually aborted.");
    return C_OK;
}

/* The final step of the shutdown sequence. Returns C_OK if the shutdown
 * sequence was successful and it's OK to call exit(). If C_ERR is returned,
 * it's not safe to call exit(). */
int finishShutdown(void) {

    int save = server.shutdown_flags & SHUTDOWN_SAVE;
    int nosave = server.shutdown_flags & SHUTDOWN_NOSAVE;
    int force = server.shutdown_flags & SHUTDOWN_FORCE;

    /* Log a warning for each replica that is lagging. */
    listIter replicas_iter;
    listNode *replicas_list_node;
    int num_replicas = 0, num_lagging_replicas = 0;
    listRewind(server.slaves, &replicas_iter);
    while ((replicas_list_node = listNext(&replicas_iter)) != NULL) {
        client *replica = listNodeValue(replicas_list_node);
        num_replicas++;
        if (replica->repl_ack_off != server.master_repl_offset) {
            num_lagging_replicas++;
            long lag = replica->replstate == SLAVE_STATE_ONLINE ?
                time(NULL) - replica->repl_ack_time : 0;
            serverLog(LL_NOTICE,
                      "Lagging replica %s reported offset %lld behind master, lag=%ld, state=%s.",
                      replicationGetSlaveName(replica),
                      server.master_repl_offset - replica->repl_ack_off,
                      lag,
                      replstateToString(replica->replstate));
        }
    }
    if (num_replicas > 0) {
        serverLog(LL_NOTICE,
                  "%d of %d replicas are in sync when shutting down.",
                  num_replicas - num_lagging_replicas,
                  num_replicas);
    }

    /* Kill all the Lua debugger forked sessions. */
    ldbKillForkedSessions();

    /* Kill the saving child if there is a background saving in progress.
       We want to avoid race conditions, for instance our saving child may
       overwrite the synchronous saving did by SHUTDOWN. */
    if (server.child_type == CHILD_TYPE_RDB) {
        serverLog(LL_WARNING,"There is a child saving an .rdb. Killing it!");
        killRDBChild();
        /* Note that, in killRDBChild normally has backgroundSaveDoneHandler
         * doing it's cleanup, but in this case this code will not be reached,
         * so we need to call rdbRemoveTempFile which will close fd(in order
         * to unlink file actually) in background thread.
         * The temp rdb file fd may won't be closed when the server exits quickly,
         * but OS will close this fd when process exits. */
        rdbRemoveTempFile(server.child_pid, 0);
    }

    /* Kill module child if there is one. */
    if (server.child_type == CHILD_TYPE_MODULE) {
        serverLog(LL_WARNING,"There is a module fork child. Killing it!");
        TerminateModuleForkChild(server.child_pid,0);
    }

    /* Kill the AOF saving child as the AOF we already have may be longer
     * but contains the full dataset anyway. */
    if (server.child_type == CHILD_TYPE_AOF) {
        /* If we have AOF enabled but haven't written the AOF yet, don't
         * shutdown or else the dataset will be lost. */
        if (server.aof_state == AOF_WAIT_REWRITE) {
            if (force) {
                serverLog(LL_WARNING, "Writing initial AOF. Exit anyway.");
            } else {
                serverLog(LL_WARNING, "Writing initial AOF, can't exit.");
                if (server.supervised_mode == SUPERVISED_SYSTEMD)
                    serverCommunicateSystemd("STATUS=Writing initial AOF, can't exit.\n");
                goto error;
            }
        }
        serverLog(LL_WARNING,
                  "There is a child rewriting the AOF. Killing it!");
        killAppendOnlyChild();
    }
    if (server.aof_state != AOF_OFF) {
        /* Append only file: flush buffers and fsync() the AOF at exit */
        serverLog(LL_NOTICE,"Calling fsync() on the AOF file.");
        flushAppendOnlyFile(1);
        if (valkey_fsync(server.aof_fd) == -1) {
            serverLog(LL_WARNING,"Fail to fsync the AOF file: %s.",
                                 strerror(errno));
        }
    }

    /* Create a new RDB file before exiting. */
    if ((server.saveparamslen > 0 && !nosave) || save) {
        serverLog(LL_NOTICE,"Saving the final RDB snapshot before exiting.");
        if (server.supervised_mode == SUPERVISED_SYSTEMD)
            serverCommunicateSystemd("STATUS=Saving the final RDB snapshot\n");
        /* Snapshotting. Perform a SYNC SAVE and exit */
        rdbSaveInfo rsi, *rsiptr;
        rsiptr = rdbPopulateSaveInfo(&rsi);
        /* Keep the page cache since it's likely to restart soon */
        if (rdbSave(SLAVE_REQ_NONE,server.rdb_filename,rsiptr,RDBFLAGS_KEEP_CACHE) != C_OK) {
            /* Ooops.. error saving! The best we can do is to continue
             * operating. Note that if there was a background saving process,
             * in the next cron() the server will be notified that the background
             * saving aborted, handling special stuff like slaves pending for
             * synchronization... */
            if (force) {
                serverLog(LL_WARNING,"Error trying to save the DB. Exit anyway.");
            } else {
                serverLog(LL_WARNING,"Error trying to save the DB, can't exit.");
                if (server.supervised_mode == SUPERVISED_SYSTEMD)
                    serverCommunicateSystemd("STATUS=Error trying to save the DB, can't exit.\n");
                goto error;
            }
        }
    }

    /* Free the AOF manifest. */
    if (server.aof_manifest) aofManifestFree(server.aof_manifest);

    /* Fire the shutdown modules event. */
    moduleFireServerEvent(VALKEYMODULE_EVENT_SHUTDOWN,0,NULL);

    /* Remove the pid file if possible and needed. */
    if (server.daemonize || server.pidfile) {
        serverLog(LL_NOTICE,"Removing the pid file.");
        unlink(server.pidfile);
    }

    /* Best effort flush of slave output buffers, so that we hopefully
     * send them pending writes. */
    flushSlavesOutputBuffers();

    /* Close the listening sockets. Apparently this allows faster restarts. */
    closeListeningSockets(1);

#if !defined(__sun)
    /* Unlock the cluster config file before shutdown */
    if (server.cluster_enabled && server.cluster_config_file_lock_fd != -1) {
        flock(server.cluster_config_file_lock_fd, LOCK_UN|LOCK_NB);
    }
#endif /* __sun */


    serverLog(LL_WARNING,"%s is now ready to exit, bye bye...",
        server.sentinel_mode ? "Sentinel" : "Valkey");
    return C_OK;

error:
    serverLog(LL_WARNING, "Errors trying to shut down the server. Check the logs for more information.");
    cancelShutdown();
    return C_ERR;
}

/*================================== Commands =============================== */

/* Sometimes the server cannot accept write commands because there is a persistence
 * error with the RDB or AOF file, and the server is configured in order to stop
 * accepting writes in such situation. This function returns if such a
 * condition is active, and the type of the condition.
 *
 * Function return values:
 *
 * DISK_ERROR_TYPE_NONE:    No problems, we can accept writes.
 * DISK_ERROR_TYPE_AOF:     Don't accept writes: AOF errors.
 * DISK_ERROR_TYPE_RDB:     Don't accept writes: RDB errors.
 */
int writeCommandsDeniedByDiskError(void) {
    if (server.stop_writes_on_bgsave_err &&
        server.saveparamslen > 0 &&
        server.lastbgsave_status == C_ERR)
    {
        return DISK_ERROR_TYPE_RDB;
    } else if (server.aof_state != AOF_OFF) {
        if (server.aof_last_write_status == C_ERR) {
            return DISK_ERROR_TYPE_AOF;
        }
        /* AOF fsync error. */
        int aof_bio_fsync_status;
        atomicGet(server.aof_bio_fsync_status,aof_bio_fsync_status);
        if (aof_bio_fsync_status == C_ERR) {
            atomicGet(server.aof_bio_fsync_errno,server.aof_last_write_errno);
            return DISK_ERROR_TYPE_AOF;
        }
    }

    return DISK_ERROR_TYPE_NONE;
}

sds writeCommandsGetDiskErrorMessage(int error_code) {
    sds ret = NULL;
    if (error_code == DISK_ERROR_TYPE_RDB) {
        ret = sdsdup(shared.bgsaveerr->ptr);
    } else {
        ret = sdscatfmt(sdsempty(),
                "-MISCONF Errors writing to the AOF file: %s\r\n",
                strerror(server.aof_last_write_errno));
    }
    return ret;
}

/* The PING command. It works in a different way if the client is in
 * in Pub/Sub mode. */
void pingCommand(client *c) {
    /* The command takes zero or one arguments. */
    if (c->argc > 2) {
        addReplyErrorArity(c);
        return;
    }

    if (c->flags & CLIENT_PUBSUB && c->resp == 2) {
        addReply(c,shared.mbulkhdr[2]);
        addReplyBulkCBuffer(c,"pong",4);
        if (c->argc == 1)
            addReplyBulkCBuffer(c,"",0);
        else
            addReplyBulk(c,c->argv[1]);
    } else {
        if (c->argc == 1)
            addReply(c,shared.pong);
        else
            addReplyBulk(c,c->argv[1]);
    }
}

void echoCommand(client *c) {
    addReplyBulk(c,c->argv[1]);
}

void timeCommand(client *c) {
    addReplyArrayLen(c,2);
    addReplyBulkLongLong(c, server.unixtime);
    addReplyBulkLongLong(c, server.ustime-((long long)server.unixtime)*1000000);
}

typedef struct replyFlagNames {
    uint64_t flag;
    const char *name;
} replyFlagNames;

/* Helper function to output flags. */
void addReplyCommandFlags(client *c, uint64_t flags, replyFlagNames *replyFlags) {
    int count = 0, j=0;
    /* Count them so we don't have to use deferred reply. */
    while (replyFlags[j].name) {
        if (flags & replyFlags[j].flag)
            count++;
        j++;
    }

    addReplySetLen(c, count);
    j = 0;
    while (replyFlags[j].name) {
        if (flags & replyFlags[j].flag)
            addReplyStatus(c, replyFlags[j].name);
        j++;
    }
}

void addReplyFlagsForCommand(client *c, struct serverCommand *cmd) {
    replyFlagNames flagNames[] = {
        {CMD_WRITE,             "write"},
        {CMD_READONLY,          "readonly"},
        {CMD_DENYOOM,           "denyoom"},
        {CMD_MODULE,            "module"},
        {CMD_ADMIN,             "admin"},
        {CMD_PUBSUB,            "pubsub"},
        {CMD_NOSCRIPT,          "noscript"},
        {CMD_BLOCKING,          "blocking"},
        {CMD_LOADING,           "loading"},
        {CMD_STALE,             "stale"},
        {CMD_SKIP_MONITOR,      "skip_monitor"},
        {CMD_SKIP_SLOWLOG,      "skip_slowlog"},
        {CMD_ASKING,            "asking"},
        {CMD_FAST,              "fast"},
        {CMD_NO_AUTH,           "no_auth"},
        /* {CMD_MAY_REPLICATE,     "may_replicate"},, Hidden on purpose */
        /* {CMD_SENTINEL,          "sentinel"}, Hidden on purpose */
        /* {CMD_ONLY_SENTINEL,     "only_sentinel"}, Hidden on purpose */
        {CMD_NO_MANDATORY_KEYS, "no_mandatory_keys"},
        /* {CMD_PROTECTED,         "protected"}, Hidden on purpose */
        {CMD_NO_ASYNC_LOADING,  "no_async_loading"},
        {CMD_NO_MULTI,          "no_multi"},
        {CMD_MOVABLE_KEYS,      "movablekeys"},
        {CMD_ALLOW_BUSY,        "allow_busy"},
        /* {CMD_TOUCHES_ARBITRARY_KEYS,  "TOUCHES_ARBITRARY_KEYS"}, Hidden on purpose */
        {0,NULL}
    };
    addReplyCommandFlags(c, cmd->flags, flagNames);
}

void addReplyDocFlagsForCommand(client *c, struct serverCommand *cmd) {
    replyFlagNames docFlagNames[] = {
        {CMD_DOC_DEPRECATED,         "deprecated"},
        {CMD_DOC_SYSCMD,             "syscmd"},
        {0,NULL}
    };
    addReplyCommandFlags(c, cmd->doc_flags, docFlagNames);
}

void addReplyFlagsForKeyArgs(client *c, uint64_t flags) {
    replyFlagNames docFlagNames[] = {
        {CMD_KEY_RO,              "RO"},
        {CMD_KEY_RW,              "RW"},
        {CMD_KEY_OW,              "OW"},
        {CMD_KEY_RM,              "RM"},
        {CMD_KEY_ACCESS,          "access"},
        {CMD_KEY_UPDATE,          "update"},
        {CMD_KEY_INSERT,          "insert"},
        {CMD_KEY_DELETE,          "delete"},
        {CMD_KEY_NOT_KEY,         "not_key"},
        {CMD_KEY_INCOMPLETE,      "incomplete"},
        {CMD_KEY_VARIABLE_FLAGS,  "variable_flags"},
        {0,NULL}
    };
    addReplyCommandFlags(c, flags, docFlagNames);
}

/* Must match serverCommandArgType */
const char *ARG_TYPE_STR[] = {
    "string",
    "integer",
    "double",
    "key",
    "pattern",
    "unix-time",
    "pure-token",
    "oneof",
    "block",
};

void addReplyFlagsForArg(client *c, uint64_t flags) {
    replyFlagNames argFlagNames[] = {
        {CMD_ARG_OPTIONAL,          "optional"},
        {CMD_ARG_MULTIPLE,          "multiple"},
        {CMD_ARG_MULTIPLE_TOKEN,    "multiple_token"},
        {0,NULL}
    };
    addReplyCommandFlags(c, flags, argFlagNames);
}

void addReplyCommandArgList(client *c, struct serverCommandArg *args, int num_args) {
    addReplyArrayLen(c, num_args);
    for (int j = 0; j<num_args; j++) {
        /* Count our reply len so we don't have to use deferred reply. */
        int has_display_text = 1;
        long maplen = 2;
        if (args[j].key_spec_index != -1) maplen++;
        if (args[j].token) maplen++;
        if (args[j].summary) maplen++;
        if (args[j].since) maplen++;
        if (args[j].deprecated_since) maplen++;
        if (args[j].flags) maplen++;
        if (args[j].type == ARG_TYPE_ONEOF || args[j].type == ARG_TYPE_BLOCK) {
            has_display_text = 0;
            maplen++;
        }
        if (has_display_text) maplen++;
        addReplyMapLen(c, maplen);

        addReplyBulkCString(c, "name");
        addReplyBulkCString(c, args[j].name);

        addReplyBulkCString(c, "type");
        addReplyBulkCString(c, ARG_TYPE_STR[args[j].type]);

        if (has_display_text) {
            addReplyBulkCString(c, "display_text");
            addReplyBulkCString(c, args[j].display_text ? args[j].display_text : args[j].name);
        }
        if (args[j].key_spec_index != -1) {
            addReplyBulkCString(c, "key_spec_index");
            addReplyLongLong(c, args[j].key_spec_index);
        }
        if (args[j].token) {
            addReplyBulkCString(c, "token");
            addReplyBulkCString(c, args[j].token);
        }
        if (args[j].summary) {
            addReplyBulkCString(c, "summary");
            addReplyBulkCString(c, args[j].summary);
        }
        if (args[j].since) {
            addReplyBulkCString(c, "since");
            addReplyBulkCString(c, args[j].since);
        }
        if (args[j].deprecated_since) {
            addReplyBulkCString(c, "deprecated_since");
            addReplyBulkCString(c, args[j].deprecated_since);
        }
        if (args[j].flags) {
            addReplyBulkCString(c, "flags");
            addReplyFlagsForArg(c, args[j].flags);
        }
        if (args[j].type == ARG_TYPE_ONEOF || args[j].type == ARG_TYPE_BLOCK) {
            addReplyBulkCString(c, "arguments");
            addReplyCommandArgList(c, args[j].subargs, args[j].num_args);
        }
    }
}

#ifdef LOG_REQ_RES

void addReplyJson(client *c, struct jsonObject *rs) {
    addReplyMapLen(c, rs->length);

    for (int i = 0; i < rs->length; i++) {
        struct jsonObjectElement *curr = &rs->elements[i];
        addReplyBulkCString(c, curr->key);
        switch (curr->type) {
        case (JSON_TYPE_BOOLEAN):
            addReplyBool(c, curr->value.boolean);
            break;
        case (JSON_TYPE_INTEGER):
            addReplyLongLong(c, curr->value.integer);
            break;
        case (JSON_TYPE_STRING):
            addReplyBulkCString(c, curr->value.string);
            break;
        case (JSON_TYPE_OBJECT):
            addReplyJson(c, curr->value.object);
            break;
        case (JSON_TYPE_ARRAY):
            addReplyArrayLen(c, curr->value.array.length);
            for (int k = 0; k < curr->value.array.length; k++) {
                struct jsonObject *object = curr->value.array.objects[k];
                addReplyJson(c, object);
            }
            break;
        default:
            serverPanic("Invalid JSON type %d", curr->type);
        }
    }
}

#endif

void addReplyCommandHistory(client *c, struct serverCommand *cmd) {
    addReplySetLen(c, cmd->num_history);
    for (int j = 0; j<cmd->num_history; j++) {
        addReplyArrayLen(c, 2);
        addReplyBulkCString(c, cmd->history[j].since);
        addReplyBulkCString(c, cmd->history[j].changes);
    }
}

void addReplyCommandTips(client *c, struct serverCommand *cmd) {
    addReplySetLen(c, cmd->num_tips);
    for (int j = 0; j<cmd->num_tips; j++) {
        addReplyBulkCString(c, cmd->tips[j]);
    }
}

void addReplyCommandKeySpecs(client *c, struct serverCommand *cmd) {
    addReplySetLen(c, cmd->key_specs_num);
    for (int i = 0; i < cmd->key_specs_num; i++) {
        int maplen = 3;
        if (cmd->key_specs[i].notes) maplen++;

        addReplyMapLen(c, maplen);

        if (cmd->key_specs[i].notes) {
            addReplyBulkCString(c, "notes");
            addReplyBulkCString(c,cmd->key_specs[i].notes);
        }

        addReplyBulkCString(c, "flags");
        addReplyFlagsForKeyArgs(c,cmd->key_specs[i].flags);

        addReplyBulkCString(c, "begin_search");
        switch (cmd->key_specs[i].begin_search_type) {
            case KSPEC_BS_UNKNOWN:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "unknown");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 0);
                break;
            case KSPEC_BS_INDEX:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "index");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 1);
                addReplyBulkCString(c, "index");
                addReplyLongLong(c, cmd->key_specs[i].bs.index.pos);
                break;
            case KSPEC_BS_KEYWORD:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "keyword");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "keyword");
                addReplyBulkCString(c, cmd->key_specs[i].bs.keyword.keyword);
                addReplyBulkCString(c, "startfrom");
                addReplyLongLong(c, cmd->key_specs[i].bs.keyword.startfrom);
                break;
            default:
                serverPanic("Invalid begin_search key spec type %d", cmd->key_specs[i].begin_search_type);
        }

        addReplyBulkCString(c, "find_keys");
        switch (cmd->key_specs[i].find_keys_type) {
            case KSPEC_FK_UNKNOWN:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "unknown");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 0);
                break;
            case KSPEC_FK_RANGE:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "range");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 3);
                addReplyBulkCString(c, "lastkey");
                addReplyLongLong(c, cmd->key_specs[i].fk.range.lastkey);
                addReplyBulkCString(c, "keystep");
                addReplyLongLong(c, cmd->key_specs[i].fk.range.keystep);
                addReplyBulkCString(c, "limit");
                addReplyLongLong(c, cmd->key_specs[i].fk.range.limit);
                break;
            case KSPEC_FK_KEYNUM:
                addReplyMapLen(c, 2);
                addReplyBulkCString(c, "type");
                addReplyBulkCString(c, "keynum");

                addReplyBulkCString(c, "spec");
                addReplyMapLen(c, 3);
                addReplyBulkCString(c, "keynumidx");
                addReplyLongLong(c, cmd->key_specs[i].fk.keynum.keynumidx);
                addReplyBulkCString(c, "firstkey");
                addReplyLongLong(c, cmd->key_specs[i].fk.keynum.firstkey);
                addReplyBulkCString(c, "keystep");
                addReplyLongLong(c, cmd->key_specs[i].fk.keynum.keystep);
                break;
            default:
                serverPanic("Invalid find_keys key spec type %d", cmd->key_specs[i].begin_search_type);
        }
    }
}

/* Reply with an array of sub-command using the provided reply callback. */
void addReplyCommandSubCommands(client *c, struct serverCommand *cmd, void (*reply_function)(client*, struct serverCommand*), int use_map) {
    if (!cmd->subcommands_dict) {
        addReplySetLen(c, 0);
        return;
    }

    if (use_map)
        addReplyMapLen(c, dictSize(cmd->subcommands_dict));
    else
        addReplyArrayLen(c, dictSize(cmd->subcommands_dict));
    dictEntry *de;
    dictIterator *di = dictGetSafeIterator(cmd->subcommands_dict);
    while((de = dictNext(di)) != NULL) {
        struct serverCommand *sub = (struct serverCommand *)dictGetVal(de);
        if (use_map)
            addReplyBulkCBuffer(c, sub->fullname, sdslen(sub->fullname));
        reply_function(c, sub);
    }
    dictReleaseIterator(di);
}

/* Output the representation of a server command. Used by the COMMAND command and COMMAND INFO. */
void addReplyCommandInfo(client *c, struct serverCommand *cmd) {
    if (!cmd) {
        addReplyNull(c);
    } else {
        int firstkey = 0, lastkey = 0, keystep = 0;
        if (cmd->legacy_range_key_spec.begin_search_type != KSPEC_BS_INVALID) {
            firstkey = cmd->legacy_range_key_spec.bs.index.pos;
            lastkey = cmd->legacy_range_key_spec.fk.range.lastkey;
            if (lastkey >= 0)
                lastkey += firstkey;
            keystep = cmd->legacy_range_key_spec.fk.range.keystep;
        }

        addReplyArrayLen(c, 10);
        addReplyBulkCBuffer(c, cmd->fullname, sdslen(cmd->fullname));
        addReplyLongLong(c, cmd->arity);
        addReplyFlagsForCommand(c, cmd);
        addReplyLongLong(c, firstkey);
        addReplyLongLong(c, lastkey);
        addReplyLongLong(c, keystep);
        addReplyCommandCategories(c, cmd);
        addReplyCommandTips(c, cmd);
        addReplyCommandKeySpecs(c, cmd);
        addReplyCommandSubCommands(c, cmd, addReplyCommandInfo, 0);
    }
}

/* Output the representation of a server command. Used by the COMMAND DOCS. */
void addReplyCommandDocs(client *c, struct serverCommand *cmd) {
    /* Count our reply len so we don't have to use deferred reply. */
    long maplen = 1;
    if (cmd->summary) maplen++;
    if (cmd->since) maplen++;
    if (cmd->flags & CMD_MODULE) maplen++;
    if (cmd->complexity) maplen++;
    if (cmd->doc_flags) maplen++;
    if (cmd->deprecated_since) maplen++;
    if (cmd->replaced_by) maplen++;
    if (cmd->history) maplen++;
#ifdef LOG_REQ_RES
    if (cmd->reply_schema) maplen++;
#endif
    if (cmd->args) maplen++;
    if (cmd->subcommands_dict) maplen++;
    addReplyMapLen(c, maplen);

    if (cmd->summary) {
        addReplyBulkCString(c, "summary");
        addReplyBulkCString(c, cmd->summary);
    }
    if (cmd->since) {
        addReplyBulkCString(c, "since");
        addReplyBulkCString(c, cmd->since);
    }

    /* Always have the group, for module commands the group is always "module". */
    addReplyBulkCString(c, "group");
    addReplyBulkCString(c, commandGroupStr(cmd->group));

    if (cmd->complexity) {
        addReplyBulkCString(c, "complexity");
        addReplyBulkCString(c, cmd->complexity);
    }
    if (cmd->flags & CMD_MODULE) {
        addReplyBulkCString(c, "module");
        addReplyBulkCString(c, moduleNameFromCommand(cmd));
    }
    if (cmd->doc_flags) {
        addReplyBulkCString(c, "doc_flags");
        addReplyDocFlagsForCommand(c, cmd);
    }
    if (cmd->deprecated_since) {
        addReplyBulkCString(c, "deprecated_since");
        addReplyBulkCString(c, cmd->deprecated_since);
    }
    if (cmd->replaced_by) {
        addReplyBulkCString(c, "replaced_by");
        addReplyBulkCString(c, cmd->replaced_by);
    }
    if (cmd->history) {
        addReplyBulkCString(c, "history");
        addReplyCommandHistory(c, cmd);
    }
#ifdef LOG_REQ_RES
    if (cmd->reply_schema) {
        addReplyBulkCString(c, "reply_schema");
        addReplyJson(c, cmd->reply_schema);
    }
#endif
    if (cmd->args) {
        addReplyBulkCString(c, "arguments");
        addReplyCommandArgList(c, cmd->args, cmd->num_args);
    }
    if (cmd->subcommands_dict) {
        addReplyBulkCString(c, "subcommands");
        addReplyCommandSubCommands(c, cmd, addReplyCommandDocs, 1);
    }
}

/* Helper for COMMAND GETKEYS and GETKEYSANDFLAGS */
void getKeysSubcommandImpl(client *c, int with_flags) {
    struct serverCommand *cmd = lookupCommand(c->argv+2,c->argc-2);
    getKeysResult result = GETKEYS_RESULT_INIT;
    int j;

    if (!cmd) {
        addReplyError(c,"Invalid command specified");
        return;
    } else if (!doesCommandHaveKeys(cmd)) {
        addReplyError(c,"The command has no key arguments");
        return;
    } else if ((cmd->arity > 0 && cmd->arity != c->argc-2) ||
               ((c->argc-2) < -cmd->arity))
    {
        addReplyError(c,"Invalid number of arguments specified for command");
        return;
    }

    if (!getKeysFromCommandWithSpecs(cmd,c->argv+2,c->argc-2,GET_KEYSPEC_DEFAULT,&result)) {
        if (cmd->flags & CMD_NO_MANDATORY_KEYS) {
            addReplyArrayLen(c,0);
        } else {
            addReplyError(c,"Invalid arguments specified for command");
        }
    } else {
        addReplyArrayLen(c,result.numkeys);
        for (j = 0; j < result.numkeys; j++) {
            if (!with_flags) {
                addReplyBulk(c,c->argv[result.keys[j].pos+2]);
            } else {
                addReplyArrayLen(c,2);
                addReplyBulk(c,c->argv[result.keys[j].pos+2]);
                addReplyFlagsForKeyArgs(c,result.keys[j].flags);
            }
        }
    }
    getKeysFreeResult(&result);
}

/* COMMAND GETKEYSANDFLAGS cmd arg1 arg2 ... */
void commandGetKeysAndFlagsCommand(client *c) {
    getKeysSubcommandImpl(c, 1);
}

/* COMMAND GETKEYS cmd arg1 arg2 ... */
void getKeysSubcommand(client *c) {
    getKeysSubcommandImpl(c, 0);
}

/* COMMAND (no args) */
void commandCommand(client *c) {
    dictIterator *di;
    dictEntry *de;

    addReplyArrayLen(c, dictSize(server.commands));
    di = dictGetIterator(server.commands);
    while ((de = dictNext(di)) != NULL) {
        addReplyCommandInfo(c, dictGetVal(de));
    }
    dictReleaseIterator(di);
}

/* COMMAND COUNT */
void commandCountCommand(client *c) {
    addReplyLongLong(c, dictSize(server.commands));
}

typedef enum {
    COMMAND_LIST_FILTER_MODULE,
    COMMAND_LIST_FILTER_ACLCAT,
    COMMAND_LIST_FILTER_PATTERN,
} commandListFilterType;

typedef struct {
    commandListFilterType type;
    sds arg;
    struct {
        int valid;
        union {
            uint64_t aclcat;
            void *module_handle;
        } u;
    } cache;
} commandListFilter;

int shouldFilterFromCommandList(struct serverCommand *cmd, commandListFilter *filter) {
    switch (filter->type) {
        case (COMMAND_LIST_FILTER_MODULE):
            if (!filter->cache.valid) {
                filter->cache.u.module_handle = moduleGetHandleByName(filter->arg);
                filter->cache.valid = 1;
            }
            return !moduleIsModuleCommand(filter->cache.u.module_handle, cmd);
        case (COMMAND_LIST_FILTER_ACLCAT): {
            if (!filter->cache.valid) {
                filter->cache.u.aclcat = ACLGetCommandCategoryFlagByName(filter->arg);
                filter->cache.valid = 1;
            }
            uint64_t cat = filter->cache.u.aclcat;
            if (cat == 0)
                return 1; /* Invalid ACL category */
            return (!(cmd->acl_categories & cat));
            break;
        }
        case (COMMAND_LIST_FILTER_PATTERN):
            return !stringmatchlen(filter->arg, sdslen(filter->arg), cmd->fullname, sdslen(cmd->fullname), 1);
        default:
            serverPanic("Invalid filter type %d", filter->type);
    }
}

/* COMMAND LIST FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>) */
void commandListWithFilter(client *c, dict *commands, commandListFilter filter, int *numcmds) {
    dictEntry *de;
    dictIterator *di = dictGetIterator(commands);

    while ((de = dictNext(di)) != NULL) {
        struct serverCommand *cmd = dictGetVal(de);
        if (!shouldFilterFromCommandList(cmd,&filter)) {
            addReplyBulkCBuffer(c, cmd->fullname, sdslen(cmd->fullname));
            (*numcmds)++;
        }

        if (cmd->subcommands_dict) {
            commandListWithFilter(c, cmd->subcommands_dict, filter, numcmds);
        }
    }
    dictReleaseIterator(di);
}

/* COMMAND LIST */
void commandListWithoutFilter(client *c, dict *commands, int *numcmds) {
    dictEntry *de;
    dictIterator *di = dictGetIterator(commands);

    while ((de = dictNext(di)) != NULL) {
        struct serverCommand *cmd = dictGetVal(de);
        addReplyBulkCBuffer(c, cmd->fullname, sdslen(cmd->fullname));
        (*numcmds)++;

        if (cmd->subcommands_dict) {
            commandListWithoutFilter(c, cmd->subcommands_dict, numcmds);
        }
    }
    dictReleaseIterator(di);
}

/* COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)] */
void commandListCommand(client *c) {

    /* Parse options. */
    int i = 2, got_filter = 0;
    commandListFilter filter = {0};
    for (; i < c->argc; i++) {
        int moreargs = (c->argc-1) - i; /* Number of additional arguments. */
        char *opt = c->argv[i]->ptr;
        if (!strcasecmp(opt,"filterby") && moreargs == 2) {
            char *filtertype = c->argv[i+1]->ptr;
            if (!strcasecmp(filtertype,"module")) {
                filter.type = COMMAND_LIST_FILTER_MODULE;
            } else if (!strcasecmp(filtertype,"aclcat")) {
                filter.type = COMMAND_LIST_FILTER_ACLCAT;
            } else if (!strcasecmp(filtertype,"pattern")) {
                filter.type = COMMAND_LIST_FILTER_PATTERN;
            } else {
                addReplyErrorObject(c,shared.syntaxerr);
                return;
            }
            got_filter = 1;
            filter.arg = c->argv[i+2]->ptr;
            i += 2;
        } else {
            addReplyErrorObject(c,shared.syntaxerr);
            return;
        }
    }

    int numcmds = 0;
    void *replylen = addReplyDeferredLen(c);

    if (got_filter) {
        commandListWithFilter(c, server.commands, filter, &numcmds);
    } else {
        commandListWithoutFilter(c, server.commands, &numcmds);
    }

    setDeferredArrayLen(c,replylen,numcmds);
}

/* COMMAND INFO [<command-name> ...] */
void commandInfoCommand(client *c) {
    int i;

    if (c->argc == 2) {
        dictIterator *di;
        dictEntry *de;
        addReplyArrayLen(c, dictSize(server.commands));
        di = dictGetIterator(server.commands);
        while ((de = dictNext(di)) != NULL) {
            addReplyCommandInfo(c, dictGetVal(de));
        }
        dictReleaseIterator(di);
    } else {
        addReplyArrayLen(c, c->argc-2);
        for (i = 2; i < c->argc; i++) {
            addReplyCommandInfo(c, lookupCommandBySds(c->argv[i]->ptr));
        }
    }
}

/* COMMAND DOCS [command-name [command-name ...]] */
void commandDocsCommand(client *c) {
    int i;
    if (c->argc == 2) {
        /* Reply with an array of all commands */
        dictIterator *di;
        dictEntry *de;
        addReplyMapLen(c, dictSize(server.commands));
        di = dictGetIterator(server.commands);
        while ((de = dictNext(di)) != NULL) {
            struct serverCommand *cmd = dictGetVal(de);
            addReplyBulkCBuffer(c, cmd->fullname, sdslen(cmd->fullname));
            addReplyCommandDocs(c, cmd);
        }
        dictReleaseIterator(di);
    } else {
        /* Reply with an array of the requested commands (if we find them) */
        int numcmds = 0;
        void *replylen = addReplyDeferredLen(c);
        for (i = 2; i < c->argc; i++) {
            struct serverCommand *cmd = lookupCommandBySds(c->argv[i]->ptr);
            if (!cmd)
                continue;
            addReplyBulkCBuffer(c, cmd->fullname, sdslen(cmd->fullname));
            addReplyCommandDocs(c, cmd);
            numcmds++;
        }
        setDeferredMapLen(c,replylen,numcmds);
    }
}

/* COMMAND GETKEYS arg0 arg1 arg2 ... */
void commandGetKeysCommand(client *c) {
    getKeysSubcommand(c);
}

/* COMMAND HELP */
void commandHelpCommand(client *c) {
    const char *help[] = {
"(no subcommand)",
"    Return details about all commands.",
"COUNT",
"    Return the total number of commands in this server.",
"LIST",
"    Return a list of all commands in this server.",
"INFO [<command-name> ...]",
"    Return details about multiple commands.",
"    If no command names are given, documentation details for all",
"    commands are returned.",
"DOCS [<command-name> ...]",
"    Return documentation details about multiple commands.",
"    If no command names are given, documentation details for all",
"    commands are returned.",
"GETKEYS <full-command>",
"    Return the keys from a full command.",
"GETKEYSANDFLAGS <full-command>",
"    Return the keys and the access flags from a full command.",
NULL
    };

    addReplyHelp(c, help);
}

/* Convert an amount of bytes into a human readable string in the form
 * of 100B, 2G, 100M, 4K, and so forth. */
void bytesToHuman(char *s, size_t size, unsigned long long n) {
    double d;

    if (n < 1024) {
        /* Bytes */
        snprintf(s,size,"%lluB",n);
    } else if (n < (1024*1024)) {
        d = (double)n/(1024);
        snprintf(s,size,"%.2fK",d);
    } else if (n < (1024LL*1024*1024)) {
        d = (double)n/(1024*1024);
        snprintf(s,size,"%.2fM",d);
    } else if (n < (1024LL*1024*1024*1024)) {
        d = (double)n/(1024LL*1024*1024);
        snprintf(s,size,"%.2fG",d);
    } else if (n < (1024LL*1024*1024*1024*1024)) {
        d = (double)n/(1024LL*1024*1024*1024);
        snprintf(s,size,"%.2fT",d);
    } else if (n < (1024LL*1024*1024*1024*1024*1024)) {
        d = (double)n/(1024LL*1024*1024*1024*1024);
        snprintf(s,size,"%.2fP",d);
    } else {
        /* Let's hope we never need this */
        snprintf(s,size,"%lluB",n);
    }
}

/* Fill percentile distribution of latencies. */
sds fillPercentileDistributionLatencies(sds info, const char* histogram_name, struct hdr_histogram* histogram) {
    info = sdscatfmt(info,"latency_percentiles_usec_%s:",histogram_name);
    for (int j = 0; j < server.latency_tracking_info_percentiles_len; j++) {
        char fbuf[128];
        size_t len = snprintf(fbuf, sizeof(fbuf), "%f", server.latency_tracking_info_percentiles[j]);
        trimDoubleString(fbuf, len);
        info = sdscatprintf(info,"p%s=%.3f", fbuf,
            ((double)hdr_value_at_percentile(histogram,server.latency_tracking_info_percentiles[j]))/1000.0f);
        if (j != server.latency_tracking_info_percentiles_len-1)
            info = sdscatlen(info,",",1);
        }
    info = sdscatprintf(info,"\r\n");
    return info;
}

const char *replstateToString(int replstate) {
    switch (replstate) {
    case SLAVE_STATE_WAIT_BGSAVE_START:
    case SLAVE_STATE_WAIT_BGSAVE_END:
        return "wait_bgsave";
    case SLAVE_STATE_SEND_BULK:
        return "send_bulk";
    case SLAVE_STATE_ONLINE:
        return "online";
    default:
        return "";
    }
}

/* Characters we sanitize on INFO output to maintain expected format. */
static char unsafe_info_chars[] = "#:\n\r";
static char unsafe_info_chars_substs[] = "____";   /* Must be same length as above */

/* Returns a sanitized version of s that contains no unsafe info string chars.
 * If no unsafe characters are found, simply returns s. Caller needs to
 * free tmp if it is non-null on return.
 */
const char *getSafeInfoString(const char *s, size_t len, char **tmp) {
    *tmp = NULL;
    if (mempbrk(s, len, unsafe_info_chars,sizeof(unsafe_info_chars)-1)
        == NULL) return s;
    char *new = *tmp = zmalloc(len + 1);
    memcpy(new, s, len);
    new[len] = '\0';
    return memmapchars(new, len, unsafe_info_chars, unsafe_info_chars_substs,
                       sizeof(unsafe_info_chars)-1);
}

sds genRedisInfoStringCommandStats(sds info, dict *commands) {
    struct serverCommand *c;
    dictEntry *de;
    dictIterator *di;
    di = dictGetSafeIterator(commands);
    while((de = dictNext(di)) != NULL) {
        char *tmpsafe;
        c = (struct serverCommand *) dictGetVal(de);
        if (c->calls || c->failed_calls || c->rejected_calls) {
            info = sdscatprintf(info,
                "cmdstat_%s:calls=%lld,usec=%lld,usec_per_call=%.2f"
                ",rejected_calls=%lld,failed_calls=%lld\r\n",
                getSafeInfoString(c->fullname, sdslen(c->fullname), &tmpsafe), c->calls, c->microseconds,
                (c->calls == 0) ? 0 : ((float)c->microseconds/c->calls),
                c->rejected_calls, c->failed_calls);
            if (tmpsafe != NULL) zfree(tmpsafe);
        }
        if (c->subcommands_dict) {
            info = genRedisInfoStringCommandStats(info, c->subcommands_dict);
        }
    }
    dictReleaseIterator(di);

    return info;
}

/* Writes the ACL metrics to the info */
sds genRedisInfoStringACLStats(sds info) {
    info = sdscatprintf(info,
         "acl_access_denied_auth:%lld\r\n"
         "acl_access_denied_cmd:%lld\r\n"
         "acl_access_denied_key:%lld\r\n"
         "acl_access_denied_channel:%lld\r\n",
         server.acl_info.user_auth_failures,
         server.acl_info.invalid_cmd_accesses,
         server.acl_info.invalid_key_accesses,
         server.acl_info.invalid_channel_accesses);
    return info;
}

sds genRedisInfoStringLatencyStats(sds info, dict *commands) {
    struct serverCommand *c;
    dictEntry *de;
    dictIterator *di;
    di = dictGetSafeIterator(commands);
    while((de = dictNext(di)) != NULL) {
        char *tmpsafe;
        c = (struct serverCommand *) dictGetVal(de);
        if (c->latency_histogram) {
            info = fillPercentileDistributionLatencies(info,
                getSafeInfoString(c->fullname, sdslen(c->fullname), &tmpsafe),
                c->latency_histogram);
            if (tmpsafe != NULL) zfree(tmpsafe);
        }
        if (c->subcommands_dict) {
            info = genRedisInfoStringLatencyStats(info, c->subcommands_dict);
        }
    }
    dictReleaseIterator(di);

    return info;
}

/* Takes a null terminated sections list, and adds them to the dict. */
void addInfoSectionsToDict(dict *section_dict, char **sections) {
    while (*sections) {
        sds section = sdsnew(*sections);
        if (dictAdd(section_dict, section, NULL)==DICT_ERR)
            sdsfree(section);
        sections++;
    }
}

/* Cached copy of the default sections, as an optimization. */
static dict *cached_default_info_sections = NULL;

void releaseInfoSectionDict(dict *sec) {
    if (sec != cached_default_info_sections)
        dictRelease(sec);
}

/* Create a dictionary with unique section names to be used by genRedisInfoString.
 * 'argv' and 'argc' are list of arguments for INFO.
 * 'defaults' is an optional null terminated list of default sections.
 * 'out_all' and 'out_everything' are optional.
 * The resulting dictionary should be released with releaseInfoSectionDict. */
dict *genInfoSectionDict(robj **argv, int argc, char **defaults, int *out_all, int *out_everything) {
    char *default_sections[] = {
        "server", "clients", "memory", "persistence", "stats", "replication",
        "cpu", "module_list", "errorstats", "cluster", "keyspace", NULL};
    if (!defaults)
        defaults = default_sections;

    if (argc == 0) {
        /* In this case we know the dict is not gonna be modified, so we cache
         * it as an optimization for a common case. */
        if (cached_default_info_sections)
            return cached_default_info_sections;
        cached_default_info_sections = dictCreate(&stringSetDictType);
        dictExpand(cached_default_info_sections, 16);
        addInfoSectionsToDict(cached_default_info_sections, defaults);
        return cached_default_info_sections;
    }

    dict *section_dict = dictCreate(&stringSetDictType);
    dictExpand(section_dict, min(argc,16));
    for (int i = 0; i < argc; i++) {
        if (!strcasecmp(argv[i]->ptr,"default")) {
            addInfoSectionsToDict(section_dict, defaults);
        } else if (!strcasecmp(argv[i]->ptr,"all")) {
            if (out_all) *out_all = 1;
        } else if (!strcasecmp(argv[i]->ptr,"everything")) {
            if (out_everything) *out_everything = 1;
            if (out_all) *out_all = 1;
        } else {
            sds section = sdsnew(argv[i]->ptr);
            if (dictAdd(section_dict, section, NULL) != DICT_OK)
                sdsfree(section);
        }
    }
    return section_dict;
}

/* sets blocking_keys to the total number of keys which has at least one client blocked on them.
 * sets blocking_keys_on_nokey to the total number of keys which has at least one client
 * blocked on them to be written or deleted.
 * sets watched_keys to the total number of keys which has at least on client watching on them. */
void totalNumberOfStatefulKeys(unsigned long *blocking_keys, unsigned long *blocking_keys_on_nokey, unsigned long *watched_keys) {
    unsigned long bkeys=0, bkeys_on_nokey=0, wkeys=0;
    for (int j = 0; j < server.dbnum; j++) {
        bkeys += dictSize(server.db[j].blocking_keys);
        bkeys_on_nokey += dictSize(server.db[j].blocking_keys_unblock_on_nokey);
        wkeys += dictSize(server.db[j].watched_keys);
    }
    if (blocking_keys)
        *blocking_keys = bkeys;
    if (blocking_keys_on_nokey)
        *blocking_keys_on_nokey = bkeys_on_nokey;
    if (watched_keys)
        *watched_keys = wkeys;
}

/* Create the string returned by the INFO command. This is decoupled
 * by the INFO command itself as we need to report the same information
 * on memory corruption problems. */
sds genRedisInfoString(dict *section_dict, int all_sections, int everything) {
    sds info = sdsempty();
    time_t uptime = server.unixtime-server.stat_starttime;
    int j;
    int sections = 0;
    if (everything) all_sections = 1;

    /* Server */
    if (all_sections || (dictFind(section_dict,"server") != NULL)) {
        static int call_uname = 1;
        static struct utsname name;
        char *mode;
        char *supervised;

        if (server.cluster_enabled) mode = "cluster";
        else if (server.sentinel_mode) mode = "sentinel";
        else mode = "standalone";

        if (server.supervised) {
            if (server.supervised_mode == SUPERVISED_UPSTART) supervised = "upstart";
            else if (server.supervised_mode == SUPERVISED_SYSTEMD) supervised = "systemd";
            else supervised = "unknown";
        } else {
            supervised = "no";
        }

        if (sections++) info = sdscat(info,"\r\n");

        if (call_uname) {
            /* Uname can be slow and is always the same output. Cache it. */
            uname(&name);
            call_uname = 0;
        }

        info = sdscatfmt(info, "# Server\r\n" FMTARGS(
            "redis_version:%s\r\n", REDIS_VERSION,
            "server_name:%s\r\n", SERVER_NAME,
            "valkey_version:%s\r\n", VALKEY_VERSION,
            "redis_git_sha1:%s\r\n", serverGitSHA1(),
            "redis_git_dirty:%i\r\n", strtol(serverGitDirty(),NULL,10) > 0,
            "redis_build_id:%s\r\n", serverBuildIdString(),
            "%s_mode:", (server.extended_redis_compat ? "redis" : "server"),
            "%s\r\n", mode,
            "os:%s", name.sysname,
            " %s", name.release,
            " %s\r\n", name.machine,
            "arch_bits:%i\r\n", server.arch_bits,
            "monotonic_clock:%s\r\n", monotonicInfoString(),
            "multiplexing_api:%s\r\n", aeGetApiName(),
            "atomicvar_api:%s\r\n", REDIS_ATOMIC_API,
            "gcc_version:%s\r\n", GNUC_VERSION_STR,
            "process_id:%I\r\n", (int64_t) getpid(),
            "process_supervised:%s\r\n", supervised,
            "run_id:%s\r\n", server.runid,
            "tcp_port:%i\r\n", server.port ? server.port : server.tls_port,
            "server_time_usec:%I\r\n", (int64_t)server.ustime,
            "uptime_in_seconds:%I\r\n", (int64_t)uptime,
            "uptime_in_days:%I\r\n", (int64_t)(uptime/(3600*24)),
            "hz:%i\r\n", server.hz,
            "configured_hz:%i\r\n", server.config_hz,
            "lru_clock:%u\r\n", server.lruclock,
            "executable:%s\r\n", server.executable ? server.executable : "",
            "config_file:%s\r\n", server.configfile ? server.configfile : "",
            "io_threads_active:%i\r\n", server.io_threads_active));

        /* Conditional properties */
        if (isShutdownInitiated()) {
            info = sdscatfmt(info,
                "shutdown_in_milliseconds:%I\r\n",
                (int64_t)(server.shutdown_mstime - commandTimeSnapshot()));
        }

        /* get all the listeners information */
        info = getListensInfoString(info);
    }

    /* Clients */
    if (all_sections || (dictFind(section_dict,"clients") != NULL)) {
        size_t maxin, maxout;
        unsigned long blocking_keys, blocking_keys_on_nokey, watched_keys;
        getExpansiveClientsInfo(&maxin,&maxout);
        totalNumberOfStatefulKeys(&blocking_keys, &blocking_keys_on_nokey, &watched_keys);
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Clients\r\n" FMTARGS(
            "connected_clients:%lu\r\n", listLength(server.clients) - listLength(server.slaves),
            "cluster_connections:%lu\r\n", getClusterConnectionsCount(),
            "maxclients:%u\r\n", server.maxclients,
            "client_recent_max_input_buffer:%zu\r\n", maxin,
            "client_recent_max_output_buffer:%zu\r\n", maxout,
            "blocked_clients:%d\r\n", server.blocked_clients,
            "tracking_clients:%d\r\n", server.tracking_clients,
            "pubsub_clients:%d\r\n", server.pubsub_clients,
            "watching_clients:%d\r\n", server.watching_clients,
            "clients_in_timeout_table:%llu\r\n", (unsigned long long) raxSize(server.clients_timeout_table),
            "total_watched_keys:%lu\r\n", watched_keys,
            "total_blocking_keys:%lu\r\n", blocking_keys,
            "total_blocking_keys_on_nokey:%lu\r\n", blocking_keys_on_nokey));
    }

    /* Memory */
    if (all_sections || (dictFind(section_dict,"memory") != NULL)) {
        char hmem[64];
        char peak_hmem[64];
        char total_system_hmem[64];
        char used_memory_lua_hmem[64];
        char used_memory_vm_total_hmem[64];
        char used_memory_scripts_hmem[64];
        char used_memory_rss_hmem[64];
        char maxmemory_hmem[64];
        size_t zmalloc_used = zmalloc_used_memory();
        size_t total_system_mem = server.system_memory_size;
        const char *evict_policy = evictPolicyToString();
        long long memory_lua = evalMemory();
        long long memory_functions = functionsMemory();
        struct serverMemOverhead *mh = getMemoryOverheadData();

        /* Peak memory is updated from time to time by serverCron() so it
         * may happen that the instantaneous value is slightly bigger than
         * the peak value. This may confuse users, so we update the peak
         * if found smaller than the current memory usage. */
        if (zmalloc_used > server.stat_peak_memory)
            server.stat_peak_memory = zmalloc_used;

        bytesToHuman(hmem,sizeof(hmem),zmalloc_used);
        bytesToHuman(peak_hmem,sizeof(peak_hmem),server.stat_peak_memory);
        bytesToHuman(total_system_hmem,sizeof(total_system_hmem),total_system_mem);
        bytesToHuman(used_memory_lua_hmem,sizeof(used_memory_lua_hmem),memory_lua);
        bytesToHuman(used_memory_vm_total_hmem,sizeof(used_memory_vm_total_hmem),memory_functions + memory_lua);
        bytesToHuman(used_memory_scripts_hmem,sizeof(used_memory_scripts_hmem),mh->lua_caches + mh->functions_caches);
        bytesToHuman(used_memory_rss_hmem,sizeof(used_memory_rss_hmem),server.cron_malloc_stats.process_rss);
        bytesToHuman(maxmemory_hmem,sizeof(maxmemory_hmem),server.maxmemory);

        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Memory\r\n" FMTARGS(
            "used_memory:%zu\r\n", zmalloc_used,
            "used_memory_human:%s\r\n", hmem,
            "used_memory_rss:%zu\r\n", server.cron_malloc_stats.process_rss,
            "used_memory_rss_human:%s\r\n", used_memory_rss_hmem,
            "used_memory_peak:%zu\r\n", server.stat_peak_memory,
            "used_memory_peak_human:%s\r\n", peak_hmem,
            "used_memory_peak_perc:%.2f%%\r\n", mh->peak_perc,
            "used_memory_overhead:%zu\r\n", mh->overhead_total,
            "used_memory_startup:%zu\r\n", mh->startup_allocated,
            "used_memory_dataset:%zu\r\n", mh->dataset,
            "used_memory_dataset_perc:%.2f%%\r\n", mh->dataset_perc,
            "allocator_allocated:%zu\r\n", server.cron_malloc_stats.allocator_allocated,
            "allocator_active:%zu\r\n", server.cron_malloc_stats.allocator_active,
            "allocator_resident:%zu\r\n", server.cron_malloc_stats.allocator_resident,
            "allocator_muzzy:%zu\r\n", server.cron_malloc_stats.allocator_muzzy,
            "total_system_memory:%lu\r\n", (unsigned long)total_system_mem,
            "total_system_memory_human:%s\r\n", total_system_hmem,
            "used_memory_lua:%lld\r\n", memory_lua, /* deprecated, renamed to used_memory_vm_eval */
            "used_memory_vm_eval:%lld\r\n", memory_lua,
            "used_memory_lua_human:%s\r\n", used_memory_lua_hmem, /* deprecated */
            "used_memory_scripts_eval:%lld\r\n", (long long)mh->lua_caches,
            "number_of_cached_scripts:%lu\r\n", dictSize(evalScriptsDict()),
            "number_of_functions:%lu\r\n", functionsNum(),
            "number_of_libraries:%lu\r\n", functionsLibNum(),
            "used_memory_vm_functions:%lld\r\n", memory_functions,
            "used_memory_vm_total:%lld\r\n", memory_functions + memory_lua,
            "used_memory_vm_total_human:%s\r\n", used_memory_vm_total_hmem,
            "used_memory_functions:%lld\r\n", (long long)mh->functions_caches,
            "used_memory_scripts:%lld\r\n", (long long)mh->lua_caches + (long long)mh->functions_caches,
            "used_memory_scripts_human:%s\r\n", used_memory_scripts_hmem,
            "maxmemory:%lld\r\n", server.maxmemory,
            "maxmemory_human:%s\r\n", maxmemory_hmem,
            "maxmemory_policy:%s\r\n", evict_policy,
            "allocator_frag_ratio:%.2f\r\n", mh->allocator_frag,
            "allocator_frag_bytes:%zu\r\n", mh->allocator_frag_bytes,
            "allocator_rss_ratio:%.2f\r\n", mh->allocator_rss,
            "allocator_rss_bytes:%zd\r\n", mh->allocator_rss_bytes,
            "rss_overhead_ratio:%.2f\r\n", mh->rss_extra,
            "rss_overhead_bytes:%zd\r\n", mh->rss_extra_bytes,
            /* The next field (mem_fragmentation_ratio) is the total RSS
             * overhead, including fragmentation, but not just it. This field
             * (and the next one) is named like that just for backward
             * compatibility. */
            "mem_fragmentation_ratio:%.2f\r\n", mh->total_frag,
            "mem_fragmentation_bytes:%zd\r\n", mh->total_frag_bytes,
            "mem_not_counted_for_evict:%zu\r\n", freeMemoryGetNotCountedMemory(),
            "mem_replication_backlog:%zu\r\n", mh->repl_backlog,
            "mem_total_replication_buffers:%zu\r\n", server.repl_buffer_mem,
            "mem_clients_slaves:%zu\r\n", mh->clients_slaves,
            "mem_clients_normal:%zu\r\n", mh->clients_normal,
            "mem_cluster_links:%zu\r\n", mh->cluster_links,
            "mem_aof_buffer:%zu\r\n", mh->aof_buffer,
            "mem_allocator:%s\r\n", ZMALLOC_LIB,
            "mem_overhead_db_hashtable_rehashing:%zu\r\n", mh->overhead_db_hashtable_rehashing,
            "active_defrag_running:%d\r\n", server.active_defrag_running,
            "lazyfree_pending_objects:%zu\r\n", lazyfreeGetPendingObjectsCount(),
            "lazyfreed_objects:%zu\r\n", lazyfreeGetFreedObjectsCount()));
        freeMemoryOverheadData(mh);
    }

    /* Persistence */
    if (all_sections || (dictFind(section_dict,"persistence") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        double fork_perc = 0;
        if (server.stat_module_progress) {
            fork_perc = server.stat_module_progress * 100;
        } else if (server.stat_current_save_keys_total) {
            fork_perc = ((double)server.stat_current_save_keys_processed / server.stat_current_save_keys_total) * 100;
        }
        int aof_bio_fsync_status;
        atomicGet(server.aof_bio_fsync_status,aof_bio_fsync_status);

        info = sdscatprintf(info, "# Persistence\r\n" FMTARGS(
            "loading:%d\r\n", (int)(server.loading && !server.async_loading),
            "async_loading:%d\r\n", (int)server.async_loading,
            "current_cow_peak:%zu\r\n", server.stat_current_cow_peak,
            "current_cow_size:%zu\r\n", server.stat_current_cow_bytes,
            "current_cow_size_age:%lu\r\n", (server.stat_current_cow_updated ?
                                             (unsigned long) elapsedMs(server.stat_current_cow_updated) / 1000 : 0),
            "current_fork_perc:%.2f\r\n", fork_perc,
            "current_save_keys_processed:%zu\r\n", server.stat_current_save_keys_processed,
            "current_save_keys_total:%zu\r\n", server.stat_current_save_keys_total,
            "rdb_changes_since_last_save:%lld\r\n", server.dirty,
            "rdb_bgsave_in_progress:%d\r\n", server.child_type == CHILD_TYPE_RDB,
            "rdb_last_save_time:%jd\r\n", (intmax_t)server.lastsave,
            "rdb_last_bgsave_status:%s\r\n", (server.lastbgsave_status == C_OK) ? "ok" : "err",
            "rdb_last_bgsave_time_sec:%jd\r\n", (intmax_t)server.rdb_save_time_last,
            "rdb_current_bgsave_time_sec:%jd\r\n", (intmax_t)((server.child_type != CHILD_TYPE_RDB) ?
                                                              -1 : time(NULL)-server.rdb_save_time_start),
            "rdb_saves:%lld\r\n", server.stat_rdb_saves,
            "rdb_last_cow_size:%zu\r\n", server.stat_rdb_cow_bytes,
            "rdb_last_load_keys_expired:%lld\r\n", server.rdb_last_load_keys_expired,
            "rdb_last_load_keys_loaded:%lld\r\n", server.rdb_last_load_keys_loaded,
            "aof_enabled:%d\r\n", server.aof_state != AOF_OFF,
            "aof_rewrite_in_progress:%d\r\n", server.child_type == CHILD_TYPE_AOF,
            "aof_rewrite_scheduled:%d\r\n", server.aof_rewrite_scheduled,
            "aof_last_rewrite_time_sec:%jd\r\n", (intmax_t)server.aof_rewrite_time_last,
            "aof_current_rewrite_time_sec:%jd\r\n", (intmax_t)((server.child_type != CHILD_TYPE_AOF) ?
                                                               -1 : time(NULL)-server.aof_rewrite_time_start),
            "aof_last_bgrewrite_status:%s\r\n", (server.aof_lastbgrewrite_status == C_OK ?
                                                 "ok" : "err"),
            "aof_rewrites:%lld\r\n", server.stat_aof_rewrites,
            "aof_rewrites_consecutive_failures:%lld\r\n", server.stat_aofrw_consecutive_failures,
            "aof_last_write_status:%s\r\n", (server.aof_last_write_status == C_OK &&
                                             aof_bio_fsync_status == C_OK) ? "ok" : "err",
            "aof_last_cow_size:%zu\r\n", server.stat_aof_cow_bytes,
            "module_fork_in_progress:%d\r\n", server.child_type == CHILD_TYPE_MODULE,
            "module_fork_last_cow_size:%zu\r\n", server.stat_module_cow_bytes));

        if (server.aof_enabled) {
            info = sdscatprintf(info, FMTARGS(
                "aof_current_size:%lld\r\n", (long long) server.aof_current_size,
                "aof_base_size:%lld\r\n", (long long) server.aof_rewrite_base_size,
                "aof_pending_rewrite:%d\r\n", server.aof_rewrite_scheduled,
                "aof_buffer_length:%zu\r\n", sdslen(server.aof_buf),
                "aof_pending_bio_fsync:%lu\r\n", bioPendingJobsOfType(BIO_AOF_FSYNC),
                "aof_delayed_fsync:%lu\r\n", server.aof_delayed_fsync));
        }

        if (server.loading) {
            double perc = 0;
            time_t eta, elapsed;
            off_t remaining_bytes = 1;

            if (server.loading_total_bytes) {
                perc = ((double)server.loading_loaded_bytes / server.loading_total_bytes) * 100;
                remaining_bytes = server.loading_total_bytes - server.loading_loaded_bytes;
            } else if(server.loading_rdb_used_mem) {
                perc = ((double)server.loading_loaded_bytes / server.loading_rdb_used_mem) * 100;
                remaining_bytes = server.loading_rdb_used_mem - server.loading_loaded_bytes;
                /* used mem is only a (bad) estimation of the rdb file size, avoid going over 100% */
                if (perc > 99.99) perc = 99.99;
                if (remaining_bytes < 1) remaining_bytes = 1;
            }

            elapsed = time(NULL)-server.loading_start_time;
            if (elapsed == 0) {
                eta = 1; /* A fake 1 second figure if we don't have
                            enough info */
            } else {
                eta = (elapsed*remaining_bytes)/(server.loading_loaded_bytes+1);
            }

            info = sdscatprintf(info, FMTARGS(
                "loading_start_time:%jd\r\n", (intmax_t) server.loading_start_time,
                "loading_total_bytes:%llu\r\n", (unsigned long long) server.loading_total_bytes,
                "loading_rdb_used_mem:%llu\r\n", (unsigned long long) server.loading_rdb_used_mem,
                "loading_loaded_bytes:%llu\r\n", (unsigned long long) server.loading_loaded_bytes,
                "loading_loaded_perc:%.2f\r\n", perc,
                "loading_eta_seconds:%jd\r\n", (intmax_t)eta));
        }
    }

    /* Stats */
    if (all_sections  || (dictFind(section_dict,"stats") != NULL)) {
        long long stat_total_reads_processed, stat_total_writes_processed;
        long long stat_net_input_bytes, stat_net_output_bytes;
        long long stat_net_repl_input_bytes, stat_net_repl_output_bytes;
        long long current_eviction_exceeded_time = server.stat_last_eviction_exceeded_time ?
            (long long) elapsedUs(server.stat_last_eviction_exceeded_time): 0;
        long long current_active_defrag_time = server.stat_last_active_defrag_time ?
            (long long) elapsedUs(server.stat_last_active_defrag_time): 0;
        long long stat_client_qbuf_limit_disconnections;
        atomicGet(server.stat_total_reads_processed, stat_total_reads_processed);
        atomicGet(server.stat_total_writes_processed, stat_total_writes_processed);
        atomicGet(server.stat_net_input_bytes, stat_net_input_bytes);
        atomicGet(server.stat_net_output_bytes, stat_net_output_bytes);
        atomicGet(server.stat_net_repl_input_bytes, stat_net_repl_input_bytes);
        atomicGet(server.stat_net_repl_output_bytes, stat_net_repl_output_bytes);
        atomicGet(server.stat_client_qbuf_limit_disconnections, stat_client_qbuf_limit_disconnections);

        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Stats\r\n" FMTARGS(
            "total_connections_received:%lld\r\n", server.stat_numconnections,
            "total_commands_processed:%lld\r\n", server.stat_numcommands,
            "instantaneous_ops_per_sec:%lld\r\n", getInstantaneousMetric(STATS_METRIC_COMMAND),
            "total_net_input_bytes:%lld\r\n", stat_net_input_bytes + stat_net_repl_input_bytes,
            "total_net_output_bytes:%lld\r\n", stat_net_output_bytes + stat_net_repl_output_bytes,
            "total_net_repl_input_bytes:%lld\r\n", stat_net_repl_input_bytes,
            "total_net_repl_output_bytes:%lld\r\n", stat_net_repl_output_bytes,
            "instantaneous_input_kbps:%.2f\r\n", (float)getInstantaneousMetric(STATS_METRIC_NET_INPUT)/1024,
            "instantaneous_output_kbps:%.2f\r\n", (float)getInstantaneousMetric(STATS_METRIC_NET_OUTPUT)/1024,
            "instantaneous_input_repl_kbps:%.2f\r\n", (float)getInstantaneousMetric(STATS_METRIC_NET_INPUT_REPLICATION)/1024,
            "instantaneous_output_repl_kbps:%.2f\r\n", (float)getInstantaneousMetric(STATS_METRIC_NET_OUTPUT_REPLICATION)/1024,
            "rejected_connections:%lld\r\n", server.stat_rejected_conn,
            "sync_full:%lld\r\n", server.stat_sync_full,
            "sync_partial_ok:%lld\r\n", server.stat_sync_partial_ok,
            "sync_partial_err:%lld\r\n", server.stat_sync_partial_err,
            "expired_keys:%lld\r\n", server.stat_expiredkeys,
            "expired_stale_perc:%.2f\r\n", server.stat_expired_stale_perc*100,
            "expired_time_cap_reached_count:%lld\r\n", server.stat_expired_time_cap_reached_count,
            "expire_cycle_cpu_milliseconds:%lld\r\n", server.stat_expire_cycle_time_used/1000,
            "evicted_keys:%lld\r\n", server.stat_evictedkeys,
            "evicted_clients:%lld\r\n", server.stat_evictedclients,
            "evicted_scripts:%lld\r\n", server.stat_evictedscripts,
            "total_eviction_exceeded_time:%lld\r\n", (server.stat_total_eviction_exceeded_time + current_eviction_exceeded_time) / 1000,
            "current_eviction_exceeded_time:%lld\r\n", current_eviction_exceeded_time / 1000,
            "keyspace_hits:%lld\r\n", server.stat_keyspace_hits,
            "keyspace_misses:%lld\r\n", server.stat_keyspace_misses,
            "pubsub_channels:%llu\r\n", kvstoreSize(server.pubsub_channels),
            "pubsub_patterns:%lu\r\n", dictSize(server.pubsub_patterns),
            "pubsubshard_channels:%llu\r\n", kvstoreSize(server.pubsubshard_channels),
            "latest_fork_usec:%lld\r\n", server.stat_fork_time,
            "total_forks:%lld\r\n", server.stat_total_forks,
            "migrate_cached_sockets:%ld\r\n", dictSize(server.migrate_cached_sockets),
            "slave_expires_tracked_keys:%zu\r\n", getSlaveKeyWithExpireCount(),
            "active_defrag_hits:%lld\r\n", server.stat_active_defrag_hits,
            "active_defrag_misses:%lld\r\n", server.stat_active_defrag_misses,
            "active_defrag_key_hits:%lld\r\n", server.stat_active_defrag_key_hits,
            "active_defrag_key_misses:%lld\r\n", server.stat_active_defrag_key_misses,
            "total_active_defrag_time:%lld\r\n", (server.stat_total_active_defrag_time + current_active_defrag_time) / 1000,
            "current_active_defrag_time:%lld\r\n", current_active_defrag_time / 1000,
            "tracking_total_keys:%lld\r\n", (unsigned long long) trackingGetTotalKeys(),
            "tracking_total_items:%lld\r\n", (unsigned long long) trackingGetTotalItems(),
            "tracking_total_prefixes:%lld\r\n", (unsigned long long) trackingGetTotalPrefixes(),
            "unexpected_error_replies:%lld\r\n", server.stat_unexpected_error_replies,
            "total_error_replies:%lld\r\n", server.stat_total_error_replies,
            "dump_payload_sanitizations:%lld\r\n", server.stat_dump_payload_sanitizations,
            "total_reads_processed:%lld\r\n", stat_total_reads_processed,
            "total_writes_processed:%lld\r\n", stat_total_writes_processed,
            "io_threaded_reads_processed:%lld\r\n", server.stat_io_reads_processed,
            "io_threaded_writes_processed:%lld\r\n", server.stat_io_writes_processed,
            "client_query_buffer_limit_disconnections:%lld\r\n", stat_client_qbuf_limit_disconnections,
            "client_output_buffer_limit_disconnections:%lld\r\n", server.stat_client_outbuf_limit_disconnections,
            "reply_buffer_shrinks:%lld\r\n", server.stat_reply_buffer_shrinks,
            "reply_buffer_expands:%lld\r\n", server.stat_reply_buffer_expands,
            "eventloop_cycles:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_EL].cnt,
            "eventloop_duration_sum:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_EL].sum,
            "eventloop_duration_cmd_sum:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_CMD].sum,
            "instantaneous_eventloop_cycles_per_sec:%llu\r\n", getInstantaneousMetric(STATS_METRIC_EL_CYCLE),
            "instantaneous_eventloop_duration_usec:%llu\r\n", getInstantaneousMetric(STATS_METRIC_EL_DURATION)));
        info = genRedisInfoStringACLStats(info);
    }

    /* Replication */
    if (all_sections || (dictFind(section_dict,"replication") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info,
            "# Replication\r\n"
            "role:%s\r\n",
            server.masterhost == NULL ? "master" : "slave");
        if (server.masterhost) {
            long long slave_repl_offset = 1;
            long long slave_read_repl_offset = 1;

            if (server.master) {
                slave_repl_offset = server.master->reploff;
                slave_read_repl_offset = server.master->read_reploff;
            } else if (server.cached_master) {
                slave_repl_offset = server.cached_master->reploff;
                slave_read_repl_offset = server.cached_master->read_reploff;
            }

            info = sdscatprintf(info, FMTARGS(
                "master_host:%s\r\n", server.masterhost,
                "master_port:%d\r\n", server.masterport,
                "master_link_status:%s\r\n", (server.repl_state == REPL_STATE_CONNECTED) ? "up" : "down",
                "master_last_io_seconds_ago:%d\r\n", server.master ? ((int)(server.unixtime-server.master->lastinteraction)) : -1,
                "master_sync_in_progress:%d\r\n", server.repl_state == REPL_STATE_TRANSFER,
                "slave_read_repl_offset:%lld\r\n", slave_read_repl_offset,
                "slave_repl_offset:%lld\r\n", slave_repl_offset));

            if (server.repl_state == REPL_STATE_TRANSFER) {
                double perc = 0;
                if (server.repl_transfer_size) {
                    perc = ((double)server.repl_transfer_read / server.repl_transfer_size) * 100;
                }
                info = sdscatprintf(info, FMTARGS(
                    "master_sync_total_bytes:%lld\r\n", (long long) server.repl_transfer_size,
                    "master_sync_read_bytes:%lld\r\n", (long long) server.repl_transfer_read,
                    "master_sync_left_bytes:%lld\r\n", (long long) (server.repl_transfer_size - server.repl_transfer_read),
                    "master_sync_perc:%.2f\r\n", perc,
                    "master_sync_last_io_seconds_ago:%d\r\n", (int)(server.unixtime-server.repl_transfer_lastio)));
            }

            if (server.repl_state != REPL_STATE_CONNECTED) {
                info = sdscatprintf(info,
                    "master_link_down_since_seconds:%jd\r\n",
                    server.repl_down_since ?
                    (intmax_t)(server.unixtime-server.repl_down_since) : -1);
            }
            info = sdscatprintf(info, FMTARGS(
                "slave_priority:%d\r\n", server.slave_priority,
                "slave_read_only:%d\r\n", server.repl_slave_ro,
                "replica_announced:%d\r\n", server.replica_announced));
        }

        info = sdscatprintf(info,
            "connected_slaves:%lu\r\n",
            listLength(server.slaves));

        /* If min-slaves-to-write is active, write the number of slaves
         * currently considered 'good'. */
        if (server.repl_min_slaves_to_write &&
            server.repl_min_slaves_max_lag) {
            info = sdscatprintf(info,
                "min_slaves_good_slaves:%d\r\n",
                server.repl_good_slaves_count);
        }

        if (listLength(server.slaves)) {
            int slaveid = 0;
            listNode *ln;
            listIter li;

            listRewind(server.slaves,&li);
            while((ln = listNext(&li))) {
                client *slave = listNodeValue(ln);
                char ip[NET_IP_STR_LEN], *slaveip = slave->slave_addr;
                int port;
                long lag = 0;

                if (!slaveip) {
                    if (connAddrPeerName(slave->conn,ip,sizeof(ip),&port) == -1)
                        continue;
                    slaveip = ip;
                }
                const char *state = replstateToString(slave->replstate);
                if (state[0] == '\0') continue;
                if (slave->replstate == SLAVE_STATE_ONLINE)
                    lag = time(NULL) - slave->repl_ack_time;

                info = sdscatprintf(info,
                    "slave%d:ip=%s,port=%d,state=%s,"
                    "offset=%lld,lag=%ld\r\n",
                    slaveid,slaveip,slave->slave_listening_port,state,
                    slave->repl_ack_off, lag);
                slaveid++;
            }
        }
        info = sdscatprintf(info, FMTARGS(
            "master_failover_state:%s\r\n", getFailoverStateString(),
            "master_replid:%s\r\n", server.replid,
            "master_replid2:%s\r\n", server.replid2,
            "master_repl_offset:%lld\r\n", server.master_repl_offset,
            "second_repl_offset:%lld\r\n", server.second_replid_offset,
            "repl_backlog_active:%d\r\n", server.repl_backlog != NULL,
            "repl_backlog_size:%lld\r\n", server.repl_backlog_size,
            "repl_backlog_first_byte_offset:%lld\r\n", server.repl_backlog ? server.repl_backlog->offset : 0,
            "repl_backlog_histlen:%lld\r\n", server.repl_backlog ? server.repl_backlog->histlen : 0));
    }

    /* CPU */
    if (all_sections || (dictFind(section_dict,"cpu") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");

        struct rusage self_ru, c_ru;
        getrusage(RUSAGE_SELF, &self_ru);
        getrusage(RUSAGE_CHILDREN, &c_ru);
        info = sdscatprintf(info,
        "# CPU\r\n"
        "used_cpu_sys:%ld.%06ld\r\n"
        "used_cpu_user:%ld.%06ld\r\n"
        "used_cpu_sys_children:%ld.%06ld\r\n"
        "used_cpu_user_children:%ld.%06ld\r\n",
        (long)self_ru.ru_stime.tv_sec, (long)self_ru.ru_stime.tv_usec,
        (long)self_ru.ru_utime.tv_sec, (long)self_ru.ru_utime.tv_usec,
        (long)c_ru.ru_stime.tv_sec, (long)c_ru.ru_stime.tv_usec,
        (long)c_ru.ru_utime.tv_sec, (long)c_ru.ru_utime.tv_usec);
#ifdef RUSAGE_THREAD
        struct rusage m_ru;
        getrusage(RUSAGE_THREAD, &m_ru);
        info = sdscatprintf(info,
            "used_cpu_sys_main_thread:%ld.%06ld\r\n"
            "used_cpu_user_main_thread:%ld.%06ld\r\n",
            (long)m_ru.ru_stime.tv_sec, (long)m_ru.ru_stime.tv_usec,
            (long)m_ru.ru_utime.tv_sec, (long)m_ru.ru_utime.tv_usec);
#endif  /* RUSAGE_THREAD */
    }

    /* Modules */
    if (all_sections || (dictFind(section_dict,"module_list") != NULL) || (dictFind(section_dict,"modules") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info,"# Modules\r\n");
        info = genModulesInfoString(info);
    }

    /* Command statistics */
    if (all_sections || (dictFind(section_dict,"commandstats") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Commandstats\r\n");
        info = genRedisInfoStringCommandStats(info, server.commands);
    }

    /* Error statistics */
    if (all_sections || (dictFind(section_dict,"errorstats") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscat(info, "# Errorstats\r\n");
        raxIterator ri;
        raxStart(&ri,server.errors);
        raxSeek(&ri,"^",NULL,0);
        struct serverError *e;
        while(raxNext(&ri)) {
            char *tmpsafe;
            e = (struct serverError *) ri.data;
            info = sdscatprintf(info,
                "errorstat_%.*s:count=%lld\r\n",
                (int)ri.key_len, getSafeInfoString((char *) ri.key, ri.key_len, &tmpsafe), e->count);
            if (tmpsafe != NULL) zfree(tmpsafe);
        }
        raxStop(&ri);
    }

    /* Latency by percentile distribution per command */
    if (all_sections || (dictFind(section_dict,"latencystats") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Latencystats\r\n");
        if (server.latency_tracking_enabled) {
            info = genRedisInfoStringLatencyStats(info, server.commands);
        }
    }

    /* Cluster */
    if (all_sections || (dictFind(section_dict,"cluster") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info,
        "# Cluster\r\n"
        "cluster_enabled:%d\r\n",
        server.cluster_enabled);
    }

    /* Key space */
    if (all_sections || (dictFind(section_dict,"keyspace") != NULL)) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Keyspace\r\n");
        for (j = 0; j < server.dbnum; j++) {
            long long keys, vkeys;

            keys = kvstoreSize(server.db[j].keys);
            vkeys = kvstoreSize(server.db[j].expires);
            if (keys || vkeys) {
                info = sdscatprintf(info,
                    "db%d:keys=%lld,expires=%lld,avg_ttl=%lld\r\n",
                    j, keys, vkeys, server.db[j].avg_ttl);
            }
        }
    }

    /* Get info from modules.
     * Returned when the user asked for "everything", "modules", or a specific module section.
     * We're not aware of the module section names here, and we rather avoid the search when we can.
     * so we proceed if there's a requested section name that's not found yet, or when the user asked
     * for "all" with any additional section names. */
    if (everything || dictFind(section_dict, "modules") != NULL || sections < (int)dictSize(section_dict) ||
        (all_sections && dictSize(section_dict)))
    {

        info = modulesCollectInfo(info,
                                  everything || dictFind(section_dict, "modules") != NULL ? NULL: section_dict,
                                  0, /* not a crash report */
                                  sections);
    }

    if (dictFind(section_dict, "debug") != NULL) {
        if (sections++) info = sdscat(info,"\r\n");
        info = sdscatprintf(info, "# Debug\r\n" FMTARGS(
            "eventloop_duration_aof_sum:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_AOF].sum,
            "eventloop_duration_cron_sum:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_CRON].sum,
            "eventloop_duration_max:%llu\r\n", server.duration_stats[EL_DURATION_TYPE_EL].max,
            "eventloop_cmd_per_cycle_max:%lld\r\n", server.el_cmd_cnt_max));
    }

    return info;
}

/* INFO [<section> [<section> ...]] */
void infoCommand(client *c) {
    if (server.sentinel_mode) {
        sentinelInfoCommand(c);
        return;
    }
    int all_sections = 0;
    int everything = 0;
    dict *sections_dict = genInfoSectionDict(c->argv+1, c->argc-1, NULL, &all_sections, &everything);
    sds info = genRedisInfoString(sections_dict, all_sections, everything);
    addReplyVerbatim(c,info,sdslen(info),"txt");
    sdsfree(info);
    releaseInfoSectionDict(sections_dict);
    return;
}

void monitorCommand(client *c) {
    if (c->flags & CLIENT_DENY_BLOCKING) {
        /**
         * A client that has CLIENT_DENY_BLOCKING flag on
         * expects a reply per command and so can't execute MONITOR. */
        addReplyError(c, "MONITOR isn't allowed for DENY BLOCKING client");
        return;
    }

    /* ignore MONITOR if already slave or in monitor mode */
    if (c->flags & CLIENT_SLAVE) return;

    c->flags |= (CLIENT_SLAVE|CLIENT_MONITOR);
    listAddNodeTail(server.monitors,c);
    addReply(c,shared.ok);
}

/* =================================== Main! ================================ */

int checkIgnoreWarning(const char *warning) {
    int argc, j;
    sds *argv = sdssplitargs(server.ignore_warnings, &argc);
    if (argv == NULL)
        return 0;

    for (j = 0; j < argc; j++) {
        char *flag = argv[j];
        if (!strcasecmp(flag, warning))
            break;
    }
    sdsfreesplitres(argv,argc);
    return j < argc;
}

#ifdef __linux__
#include <sys/prctl.h>
/* since linux-3.5, kernel supports to set the state of the "THP disable" flag
 * for the calling thread. PR_SET_THP_DISABLE is defined in linux/prctl.h */
static int THPDisable(void) {
    int ret = -EINVAL;

    if (!server.disable_thp)
        return ret;

#ifdef PR_SET_THP_DISABLE
    ret = prctl(PR_SET_THP_DISABLE, 1, 0, 0, 0);
#endif

    return ret;
}

void linuxMemoryWarnings(void) {
    sds err_msg = NULL;
    if (checkOvercommit(&err_msg) < 0) {
        serverLog(LL_WARNING,"WARNING %s", err_msg);
        sdsfree(err_msg);
    }
    if (checkTHPEnabled(&err_msg) < 0) {
        server.thp_enabled = 1;
        if (THPDisable() == 0) {
            server.thp_enabled = 0;
        } else {
            serverLog(LL_WARNING, "WARNING %s", err_msg);
        }
        sdsfree(err_msg);
    }
}
#endif /* __linux__ */

void createPidFile(void) {
    /* If pidfile requested, but no pidfile defined, use
     * default pidfile path */
    if (!server.pidfile) server.pidfile = zstrdup(CONFIG_DEFAULT_PID_FILE);

    /* Try to write the pid file in a best-effort way. */
    FILE *fp = fopen(server.pidfile,"w");
    if (fp) {
        fprintf(fp,"%d\n",(int)getpid());
        fclose(fp);
    } else {
        serverLog(LL_WARNING, "Failed to write PID file: %s", strerror(errno));
    }
}

void daemonize(void) {
    int fd;

    if (fork() != 0) exit(0); /* parent exits */
    setsid(); /* create a new session */

    /* Every output goes to /dev/null. If the server is daemonized but
     * the 'logfile' is set to 'stdout' in the configuration file
     * it will not log at all. */
    if ((fd = open("/dev/null", O_RDWR, 0)) != -1) {
        dup2(fd, STDIN_FILENO);
        dup2(fd, STDOUT_FILENO);
        dup2(fd, STDERR_FILENO);
        if (fd > STDERR_FILENO) close(fd);
    }
}

sds getVersion(void) {
    sds version = sdscatprintf(sdsempty(),
        "v=%s sha=%s:%d malloc=%s bits=%d build=%llx",
        VALKEY_VERSION,
        serverGitSHA1(),
        atoi(serverGitDirty()) > 0,
        ZMALLOC_LIB,
        sizeof(long) == 4 ? 32 : 64,
        (unsigned long long) serverBuildId());
    return version;
}

void usage(void) {
    fprintf(stderr,"Usage: ./valkey-server [/path/to/valkey.conf] [options] [-]\n");
    fprintf(stderr,"       ./valkey-server - (read config from stdin)\n");
    fprintf(stderr,"       ./valkey-server -v or --version\n");
    fprintf(stderr,"       ./valkey-server -h or --help\n");
    fprintf(stderr,"       ./valkey-server --test-memory <megabytes>\n");
    fprintf(stderr,"       ./valkey-server --check-system\n");
    fprintf(stderr,"\n");
    fprintf(stderr,"Examples:\n");
    fprintf(stderr,"       ./valkey-server (run the server with default conf)\n");
    fprintf(stderr,"       echo 'maxmemory 128mb' | ./valkey-server -\n");
    fprintf(stderr,"       ./valkey-server /etc/valkey/6379.conf\n");
    fprintf(stderr,"       ./valkey-server --port 7777\n");
    fprintf(stderr,"       ./valkey-server --port 7777 --replicaof 127.0.0.1 8888\n");
    fprintf(stderr,"       ./valkey-server /etc/myvalkey.conf --loglevel verbose -\n");
    fprintf(stderr,"       ./valkey-server /etc/myvalkey.conf --loglevel verbose\n\n");
    fprintf(stderr,"Sentinel mode:\n");
    fprintf(stderr,"       ./valkey-server /etc/sentinel.conf --sentinel\n");
    exit(1);
}

void serverAsciiArt(void) {
#include "asciilogo.h"
    char *buf = zmalloc(1024*16);
    char *mode;

    if (server.cluster_enabled) mode = "cluster";
    else if (server.sentinel_mode) mode = "sentinel";
    else mode = "standalone";

    /* Show the ASCII logo if: log file is stdout AND stdout is a
     * tty AND syslog logging is disabled. Also show logo if the user
     * forced us to do so via valkey.conf. */
    int show_logo = ((!server.syslog_enabled &&
                      server.logfile[0] == '\0' &&
                      isatty(fileno(stdout))) ||
                     server.always_show_logo);

    if (!show_logo) {
        serverLog(LL_NOTICE,
            "Running mode=%s, port=%d.",
            mode, server.port ? server.port : server.tls_port
        );
    } else {
        snprintf(buf,1024*16,ascii_logo,
            VALKEY_VERSION,
            serverGitSHA1(),
            strtol(serverGitDirty(),NULL,10) > 0,
            (sizeof(long) == 8) ? "64" : "32",
            mode, server.port ? server.port : server.tls_port,
            (long) getpid()
        );
        serverLogRaw(LL_NOTICE|LL_RAW,buf);
    }
    zfree(buf);
}

/* Get the server listener by type name */
connListener *listenerByType(const char *typename) {
    int conn_index;

    conn_index = connectionIndexByType(typename);
    if (conn_index < 0)
        return NULL;

    return &server.listeners[conn_index];
}

/* Close original listener, re-create a new listener from the updated bind address & port */
int changeListener(connListener *listener) {
    /* Close old servers */
    closeListener(listener);

    /* Just close the server if port disabled */
    if (listener->port == 0) {
        if (server.set_proc_title) serverSetProcTitle(NULL);
        return C_OK;
    }

    /* Re-create listener */
    if (connListen(listener) != C_OK) {
        return C_ERR;
    }

    /* Create event handlers */
    if (createSocketAcceptHandler(listener, listener->ct->accept_handler) != C_OK) {
        serverPanic("Unrecoverable error creating %s accept handler.", listener->ct->get_type(NULL));
    }

    if (server.set_proc_title) serverSetProcTitle(NULL);

    return C_OK;
}

static void sigShutdownHandler(int sig) {
    char *msg;

    switch (sig) {
    case SIGINT:
        msg = "Received SIGINT scheduling shutdown...";
        break;
    case SIGTERM:
        msg = "Received SIGTERM scheduling shutdown...";
        break;
    default:
        msg = "Received shutdown signal, scheduling shutdown...";
    };

    /* SIGINT is often delivered via Ctrl+C in an interactive session.
     * If we receive the signal the second time, we interpret this as
     * the user really wanting to quit ASAP without waiting to persist
     * on disk and without waiting for lagging replicas. */
    if (server.shutdown_asap && sig == SIGINT) {
        serverLogRawFromHandler(LL_WARNING, "You insist... exiting now.");
        rdbRemoveTempFile(getpid(), 1);
        exit(1); /* Exit with an error since this was not a clean shutdown. */
    } else if (server.loading) {
        msg = "Received shutdown signal during loading, scheduling shutdown.";
    }

    serverLogRawFromHandler(LL_WARNING, msg);
    server.shutdown_asap = 1;
    server.last_sig_received = sig;
}

void setupSignalHandlers(void) {
    struct sigaction act;

    sigemptyset(&act.sa_mask);
    act.sa_flags = 0;
    act.sa_handler = sigShutdownHandler;
    sigaction(SIGTERM, &act, NULL);
    sigaction(SIGINT, &act, NULL);

    setupDebugSigHandlers();
}

/* This is the signal handler for children process. It is currently useful
 * in order to track the SIGUSR1, that we send to a child in order to terminate
 * it in a clean way, without the parent detecting an error and stop
 * accepting writes because of a write error condition. */
static void sigKillChildHandler(int sig) {
    UNUSED(sig);
    int level = server.in_fork_child == CHILD_TYPE_MODULE? LL_VERBOSE: LL_WARNING;
    serverLogRawFromHandler(level, "Received SIGUSR1 in child, exiting now.");
    exitFromChild(SERVER_CHILD_NOERROR_RETVAL);
}

void setupChildSignalHandlers(void) {
    struct sigaction act;

    /* When the SA_SIGINFO flag is set in sa_flags then sa_sigaction is used.
     * Otherwise, sa_handler is used. */
    sigemptyset(&act.sa_mask);
    act.sa_flags = 0;
    act.sa_handler = sigKillChildHandler;
    sigaction(SIGUSR1, &act, NULL);
}

/* After fork, the child process will inherit the resources
 * of the parent process, e.g. fd(socket or flock) etc.
 * should close the resources not used by the child process, so that if the
 * parent restarts it can bind/lock despite the child possibly still running. */
void closeChildUnusedResourceAfterFork(void) {
    closeListeningSockets(0);
    if (server.cluster_enabled && server.cluster_config_file_lock_fd != -1)
        close(server.cluster_config_file_lock_fd);  /* don't care if this fails */

    /* Clear server.pidfile, this is the parent pidfile which should not
     * be touched (or deleted) by the child (on exit / crash) */
    zfree(server.pidfile);
    server.pidfile = NULL;
}

/* purpose is one of CHILD_TYPE_ types */
int serverFork(int purpose) {
    if (isMutuallyExclusiveChildType(purpose)) {
        if (hasActiveChildProcess()) {
            errno = EEXIST;
            return -1;
        }

        openChildInfoPipe();
    }

    int childpid;
    long long start = ustime();
    if ((childpid = fork()) == 0) {
        /* Child.
         *
         * The order of setting things up follows some reasoning:
         * Setup signal handlers first because a signal could fire at any time.
         * Adjust OOM score before everything else to assist the OOM killer if
         * memory resources are low.
         */
        server.in_fork_child = purpose;
        setupChildSignalHandlers();
        setOOMScoreAdj(CONFIG_OOM_BGCHILD);
        updateDictResizePolicy();
        dismissMemoryInChild();
        closeChildUnusedResourceAfterFork();
        /* Close the reading part, so that if the parent crashes, the child will
         * get a write error and exit. */
        if (server.child_info_pipe[0] != -1)
            close(server.child_info_pipe[0]);
    } else {
        /* Parent */
        if (childpid == -1) {
            int fork_errno = errno;
            if (isMutuallyExclusiveChildType(purpose)) closeChildInfoPipe();
            errno = fork_errno;
            return -1;
        }

        server.stat_total_forks++;
        server.stat_fork_time = ustime()-start;
        server.stat_fork_rate = (double) zmalloc_used_memory() * 1000000 / server.stat_fork_time / (1024*1024*1024); /* GB per second. */
        latencyAddSampleIfNeeded("fork",server.stat_fork_time/1000);

        /* The child_pid and child_type are only for mutually exclusive children.
         * other child types should handle and store their pid's in dedicated variables.
         *
         * Today, we allows CHILD_TYPE_LDB to run in parallel with the other fork types:
         * - it isn't used for production, so it will not make the server be less efficient
         * - used for debugging, and we don't want to block it from running while other
         *   forks are running (like RDB and AOF) */
        if (isMutuallyExclusiveChildType(purpose)) {
            server.child_pid = childpid;
            server.child_type = purpose;
            server.stat_current_cow_peak = 0;
            server.stat_current_cow_bytes = 0;
            server.stat_current_cow_updated = 0;
            server.stat_current_save_keys_processed = 0;
            server.stat_module_progress = 0;
            server.stat_current_save_keys_total = dbTotalServerKeyCount();
        }

        updateDictResizePolicy();
        moduleFireServerEvent(VALKEYMODULE_EVENT_FORK_CHILD,
                              VALKEYMODULE_SUBEVENT_FORK_CHILD_BORN,
                              NULL);
    }
    return childpid;
}

void sendChildCowInfo(childInfoType info_type, char *pname) {
    sendChildInfoGeneric(info_type, 0, -1, pname);
}

void sendChildInfo(childInfoType info_type, size_t keys, char *pname) {
    sendChildInfoGeneric(info_type, keys, -1, pname);
}

/* Try to release pages back to the OS directly (bypassing the allocator),
 * in an effort to decrease CoW during fork. For small allocations, we can't
 * release any full page, so in an effort to avoid getting the size of the
 * allocation from the allocator (malloc_size) when we already know it's small,
 * we check the size_hint. If the size is not already known, passing a size_hint
 * of 0 will lead the checking the real size of the allocation.
 * Also please note that the size may be not accurate, so in order to make this
 * solution effective, the judgement for releasing memory pages should not be
 * too strict. */
void dismissMemory(void* ptr, size_t size_hint) {
    if (ptr == NULL) return;

    /* madvise(MADV_DONTNEED) can not release pages if the size of memory
     * is too small, we try to release only for the memory which the size
     * is more than half of page size. */
    if (size_hint && size_hint <= server.page_size/2) return;

    zmadvise_dontneed(ptr);
}

/* Dismiss big chunks of memory inside a client structure, see dismissMemory() */
void dismissClientMemory(client *c) {
    /* Dismiss client query buffer and static reply buffer. */
    dismissMemory(c->buf, c->buf_usable_size);
    dismissSds(c->querybuf);
    /* Dismiss argv array only if we estimate it contains a big buffer. */
    if (c->argc && c->argv_len_sum/c->argc >= server.page_size) {
        for (int i = 0; i < c->argc; i++) {
            dismissObject(c->argv[i], 0);
        }
    }
    if (c->argc) dismissMemory(c->argv, c->argc*sizeof(robj*));

    /* Dismiss the reply array only if the average buffer size is bigger
     * than a page. */
    if (listLength(c->reply) &&
        c->reply_bytes/listLength(c->reply) >= server.page_size)
    {
        listIter li;
        listNode *ln;
        listRewind(c->reply, &li);
        while ((ln = listNext(&li))) {
            clientReplyBlock *bulk = listNodeValue(ln);
            /* Default bulk size is 16k, actually it has extra data, maybe it
             * occupies 20k according to jemalloc bin size if using jemalloc. */
            if (bulk) dismissMemory(bulk, bulk->size);
        }
    }
}

/* In the child process, we don't need some buffers anymore, and these are
 * likely to change in the parent when there's heavy write traffic.
 * We dismiss them right away, to avoid CoW.
 * see dismissMemory(). */
void dismissMemoryInChild(void) {
    /* madvise(MADV_DONTNEED) may not work if Transparent Huge Pages is enabled. */
    if (server.thp_enabled) return;

    /* Currently we use zmadvise_dontneed only when we use jemalloc with Linux.
     * so we avoid these pointless loops when they're not going to do anything. */
#if defined(USE_JEMALLOC) && defined(__linux__)
    listIter li;
    listNode *ln;

    /* Dismiss replication buffer. We don't need to separately dismiss replication
     * backlog and replica' output buffer, because they just reference the global
     * replication buffer but don't cost real memory. */
    listRewind(server.repl_buffer_blocks, &li);
    while((ln = listNext(&li))) {
        replBufBlock *o = listNodeValue(ln);
        dismissMemory(o, o->size);
    }

    /* Dismiss all clients memory. */
    listRewind(server.clients, &li);
    while((ln = listNext(&li))) {
        client *c = listNodeValue(ln);
        dismissClientMemory(c);
    }
#endif
}

void memtest(size_t megabytes, int passes);

/* Returns 1 if there is --sentinel among the arguments or if
 * executable name contains "valkey-sentinel". */
int checkForSentinelMode(int argc, char **argv, char *exec_name) {
    if (strstr(exec_name,"valkey-sentinel") != NULL) return 1;

    for (int j = 1; j < argc; j++)
        if (!strcmp(argv[j],"--sentinel")) return 1;
    return 0;
}

/* Function called at startup to load RDB or AOF file in memory. */
void loadDataFromDisk(void) {
    long long start = ustime();
    if (server.aof_state == AOF_ON) {
        int ret = loadAppendOnlyFiles(server.aof_manifest);
        if (ret == AOF_FAILED || ret == AOF_OPEN_ERR)
            exit(1);
        if (ret != AOF_NOT_EXIST)
            serverLog(LL_NOTICE, "DB loaded from append only file: %.3f seconds", (float)(ustime()-start)/1000000);
    } else {
        rdbSaveInfo rsi = RDB_SAVE_INFO_INIT;
        int rsi_is_valid = 0;
        errno = 0; /* Prevent a stale value from affecting error checking */
        int rdb_flags = RDBFLAGS_NONE;
        if (iAmMaster()) {
            /* Master may delete expired keys when loading, we should
             * propagate expire to replication backlog. */
            createReplicationBacklog();
            rdb_flags |= RDBFLAGS_FEED_REPL;
        }
        int rdb_load_ret = rdbLoad(server.rdb_filename, &rsi, rdb_flags);
        if (rdb_load_ret == RDB_OK) {
            serverLog(LL_NOTICE,"DB loaded from disk: %.3f seconds",
                (float)(ustime()-start)/1000000);

            /* Restore the replication ID / offset from the RDB file. */
            if (rsi.repl_id_is_set &&
                rsi.repl_offset != -1 &&
                /* Note that older implementations may save a repl_stream_db
                 * of -1 inside the RDB file in a wrong way, see more
                 * information in function rdbPopulateSaveInfo. */
                rsi.repl_stream_db != -1)
            {
                rsi_is_valid = 1;
                if (!iAmMaster()) {
                    memcpy(server.replid,rsi.repl_id,sizeof(server.replid));
                    server.master_repl_offset = rsi.repl_offset;
                    /* If this is a replica, create a cached master from this
                     * information, in order to allow partial resynchronizations
                     * with masters. */
                    replicationCacheMasterUsingMyself();
                    selectDb(server.cached_master,rsi.repl_stream_db);
                } else {
                    /* If this is a master, we can save the replication info
                     * as secondary ID and offset, in order to allow replicas
                     * to partial resynchronizations with masters. */
                    memcpy(server.replid2,rsi.repl_id,sizeof(server.replid));
                    server.second_replid_offset = rsi.repl_offset+1;
                    /* Rebase master_repl_offset from rsi.repl_offset. */
                    server.master_repl_offset += rsi.repl_offset;
                    serverAssert(server.repl_backlog);
                    server.repl_backlog->offset = server.master_repl_offset -
                              server.repl_backlog->histlen + 1;
                    rebaseReplicationBuffer(rsi.repl_offset);
                    server.repl_no_slaves_since = time(NULL);
                }
            }
        } else if (rdb_load_ret != RDB_NOT_EXIST) {
            serverLog(LL_WARNING, "Fatal error loading the DB, check server logs. Exiting.");
            exit(1);
        }

        /* We always create replication backlog if server is a master, we need
         * it because we put DELs in it when loading expired keys in RDB, but
         * if RDB doesn't have replication info or there is no rdb, it is not
         * possible to support partial resynchronization, to avoid extra memory
         * of replication backlog, we drop it. */
        if (!rsi_is_valid && server.repl_backlog)
            freeReplicationBacklog();
    }
}

void serverOutOfMemoryHandler(size_t allocation_size) {
    serverLog(LL_WARNING,"Out Of Memory allocating %zu bytes!",
        allocation_size);
    serverPanic("Valkey aborting for OUT OF MEMORY. Allocating %zu bytes!",
        allocation_size);
}

/* Callback for sdstemplate on proc-title-template. See valkey.conf for
 * supported variables.
 */
static sds serverProcTitleGetVariable(const sds varname, void *arg)
{
    if (!strcmp(varname, "title")) {
        return sdsnew(arg);
    } else if (!strcmp(varname, "listen-addr")) {
        if (server.port || server.tls_port)
            return sdscatprintf(sdsempty(), "%s:%u",
                                server.bindaddr_count ? server.bindaddr[0] : "*",
                                server.port ? server.port : server.tls_port);
        else
            return sdscatprintf(sdsempty(), "unixsocket:%s", server.unixsocket);
    } else if (!strcmp(varname, "server-mode")) {
        if (server.cluster_enabled) return sdsnew("[cluster]");
        else if (server.sentinel_mode) return sdsnew("[sentinel]");
        else return sdsempty();
    } else if (!strcmp(varname, "config-file")) {
        return sdsnew(server.configfile ? server.configfile : "-");
    } else if (!strcmp(varname, "port")) {
        return sdscatprintf(sdsempty(), "%u", server.port);
    } else if (!strcmp(varname, "tls-port")) {
        return sdscatprintf(sdsempty(), "%u", server.tls_port);
    } else if (!strcmp(varname, "unixsocket")) {
        return sdsnew(server.unixsocket);
    } else
        return NULL;    /* Unknown variable name */
}

/* Expand the specified proc-title-template string and return a newly
 * allocated sds, or NULL. */
static sds expandProcTitleTemplate(const char *template, const char *title) {
    sds res = sdstemplate(template, serverProcTitleGetVariable, (void *) title);
    if (!res)
        return NULL;
    return sdstrim(res, " ");
}
/* Validate the specified template, returns 1 if valid or 0 otherwise. */
int validateProcTitleTemplate(const char *template) {
    int ok = 1;
    sds res = expandProcTitleTemplate(template, "");
    if (!res)
        return 0;
    if (sdslen(res) == 0) ok = 0;
    sdsfree(res);
    return ok;
}

int serverSetProcTitle(char *title) {
#ifdef USE_SETPROCTITLE
    if (!title) title = server.exec_argv[0];
    sds proc_title = expandProcTitleTemplate(server.proc_title_template, title);
    if (!proc_title) return C_ERR;  /* Not likely, proc_title_template is validated */

    setproctitle("%s", proc_title);
    sdsfree(proc_title);
#else
    UNUSED(title);
#endif

    return C_OK;
}

void serverSetCpuAffinity(const char *cpulist) {
#ifdef USE_SETCPUAFFINITY
    setcpuaffinity(cpulist);
#else
    UNUSED(cpulist);
#endif
}

/* Send a notify message to systemd. Returns sd_notify return code which is
 * a positive number on success. */
int serverCommunicateSystemd(const char *sd_notify_msg) {
#ifdef HAVE_LIBSYSTEMD
    int ret = sd_notify(0, sd_notify_msg);

    if (ret == 0)
        serverLog(LL_WARNING, "systemd supervision error: NOTIFY_SOCKET not found!");
    else if (ret < 0)
        serverLog(LL_WARNING, "systemd supervision error: sd_notify: %d", ret);
    return ret;
#else
    UNUSED(sd_notify_msg);
    return 0;
#endif
}

/* Attempt to set up upstart supervision. Returns 1 if successful. */
static int serverSupervisedUpstart(void) {
    const char *upstart_job = getenv("UPSTART_JOB");

    if (!upstart_job) {
        serverLog(LL_WARNING,
                "upstart supervision requested, but UPSTART_JOB not found!");
        return 0;
    }

    serverLog(LL_NOTICE, "supervised by upstart, will stop to signal readiness.");
    raise(SIGSTOP);
    unsetenv("UPSTART_JOB");
    return 1;
}

/* Attempt to set up systemd supervision. Returns 1 if successful. */
static int serverSupervisedSystemd(void) {
#ifndef HAVE_LIBSYSTEMD
    serverLog(LL_WARNING,
            "systemd supervision requested or auto-detected, but Valkey is compiled without libsystemd support!");
    return 0;
#else
    if (serverCommunicateSystemd("STATUS=Valkey is loading...\n") <= 0)
        return 0;
    serverLog(LL_NOTICE,
        "Supervised by systemd. Please make sure you set appropriate values for TimeoutStartSec and TimeoutStopSec in your service unit.");
    return 1;
#endif
}

int serverIsSupervised(int mode) {
    int ret = 0;

    if (mode == SUPERVISED_AUTODETECT) {
        if (getenv("UPSTART_JOB")) {
            serverLog(LL_VERBOSE, "Upstart supervision detected.");
            mode = SUPERVISED_UPSTART;
        } else if (getenv("NOTIFY_SOCKET")) {
            serverLog(LL_VERBOSE, "Systemd supervision detected.");
            mode = SUPERVISED_SYSTEMD;
        }
    }

    switch (mode) {
        case SUPERVISED_UPSTART:
            ret = serverSupervisedUpstart();
            break;
        case SUPERVISED_SYSTEMD:
            ret = serverSupervisedSystemd();
            break;
        default:
            break;
    }

    if (ret)
        server.supervised_mode = mode;

    return ret;
}

int iAmMaster(void) {
    return ((!server.cluster_enabled && server.masterhost == NULL) ||
            (server.cluster_enabled && clusterNodeIsMaster(getMyClusterNode())));
}

#ifdef SERVER_TEST
#include "testhelp.h"
#include "intset.h"  /* Compact integer set structure */

int __failed_tests = 0;
int __test_num = 0;

/* The flags are the following:
* --accurate:     Runs tests with more iterations.
* --large-memory: Enables tests that consume more than 100mb. */
typedef int serverTestProc(int argc, char **argv, int flags);
struct serverTest {
    char *name;
    serverTestProc *proc;
    int failed;
} serverTests[] = {
    {"ziplist", ziplistTest},
    {"quicklist", quicklistTest},
    {"intset", intsetTest},
    {"zipmap", zipmapTest},
    {"sha1test", sha1Test},
    {"util", utilTest},
    {"endianconv", endianconvTest},
    {"crc64", crc64Test},
    {"zmalloc", zmalloc_test},
    {"sds", sdsTest},
    {"dict", dictTest},
    {"listpack", listpackTest},
    {"kvstore", kvstoreTest},
};
serverTestProc *getTestProcByName(const char *name) {
    int numtests = sizeof(serverTests)/sizeof(struct serverTest);
    for (int j = 0; j < numtests; j++) {
        if (!strcasecmp(name,serverTests[j].name)) {
            return serverTests[j].proc;
        }
    }
    return NULL;
}
#endif

int main(int argc, char **argv) {
    struct timeval tv;
    int j;
    char config_from_stdin = 0;

#ifdef SERVER_TEST
    monotonicInit(); /* Required for dict tests, that are relying on monotime during dict rehashing. */
    if (argc >= 3 && !strcasecmp(argv[1], "test")) {
        int flags = 0;
        for (j = 3; j < argc; j++) {
            char *arg = argv[j];
            if (!strcasecmp(arg, "--accurate")) flags |= TEST_ACCURATE;
            else if (!strcasecmp(arg, "--large-memory")) flags |= TEST_LARGE_MEMORY;
            else if (!strcasecmp(arg, "--valgrind")) flags |= TEST_VALGRIND;
        }

        if (!strcasecmp(argv[2], "all")) {
            int numtests = sizeof(serverTests)/sizeof(struct serverTest);
            for (j = 0; j < numtests; j++) {
                serverTests[j].failed = (serverTests[j].proc(argc,argv,flags) != 0);
            }

            /* Report tests result */
            int failed_num = 0;
            for (j = 0; j < numtests; j++) {
                if (serverTests[j].failed) {
                    failed_num++;
                    printf("[failed] Test - %s\n", serverTests[j].name);
                } else {
                    printf("[ok] Test - %s\n", serverTests[j].name);
                }
            }

            printf("%d tests, %d passed, %d failed\n", numtests,
                   numtests-failed_num, failed_num);

            return failed_num == 0 ? 0 : 1;
        } else {
            serverTestProc *proc = getTestProcByName(argv[2]);
            if (!proc) return -1; /* test not found */
            return proc(argc,argv,flags);
        }

        return 0;
    }
#endif

    /* We need to initialize our libraries, and the server configuration. */
#ifdef INIT_SETPROCTITLE_REPLACEMENT
    spt_init(argc, argv);
#endif
    tzset(); /* Populates 'timezone' global. */
    zmalloc_set_oom_handler(serverOutOfMemoryHandler);

    /* To achieve entropy, in case of containers, their time() and getpid() can
     * be the same. But value of tv_usec is fast enough to make the difference */
    gettimeofday(&tv,NULL);
    srand(time(NULL)^getpid()^tv.tv_usec);
    srandom(time(NULL)^getpid()^tv.tv_usec);
    init_genrand64(((long long) tv.tv_sec * 1000000 + tv.tv_usec) ^ getpid());
    crc64_init();

    /* Store umask value. Because umask(2) only offers a set-and-get API we have
     * to reset it and restore it back. We do this early to avoid a potential
     * race condition with threads that could be creating files or directories.
     */
    umask(server.umask = umask(0777));

    uint8_t hashseed[16];
    getRandomBytes(hashseed,sizeof(hashseed));
    dictSetHashFunctionSeed(hashseed);

    char *exec_name = strrchr(argv[0], '/');
    if (exec_name == NULL) exec_name = argv[0];
    server.sentinel_mode = checkForSentinelMode(argc,argv, exec_name);

    /* Determine Valkey is started by using symlinks, server.server_symlink can be used 
     * to set actual process name later. */
    if (strstr(exec_name,"redis-server") != NULL) {
        server.server_symlink = VALKEY_SYMLINKED;
    } else {
        server.server_symlink = VALKEY_NOT_SYMLINKED;
    }

    initServerConfig();
    ACLInit(); /* The ACL subsystem must be initialized ASAP because the
                  basic networking code and client creation depends on it. */
    moduleInitModulesSystem();
    connTypeInitialize();

    /* Store the executable path and arguments in a safe place in order
     * to be able to restart the server later. */
    server.executable = getAbsolutePath(argv[0]);
    server.exec_argv = zmalloc(sizeof(char*)*(argc+1));
    server.exec_argv[argc] = NULL;
    for (j = 0; j < argc; j++) server.exec_argv[j] = zstrdup(argv[j]);

    /* We need to init sentinel right now as parsing the configuration file
     * in sentinel mode will have the effect of populating the sentinel
     * data structures with master nodes to monitor. */
    if (server.sentinel_mode) {
        initSentinelConfig();
        initSentinel();
    }

    /* Check if we need to start in valkey-check-rdb/aof mode. We just execute
     * the program main. However the program is part of the server executable
     * so that we can easily execute an RDB check on loading errors. */
    if (strstr(exec_name,"valkey-check-rdb") != NULL)
        redis_check_rdb_main(argc,argv,NULL);
    else if (strstr(exec_name,"valkey-check-aof") != NULL)
        redis_check_aof_main(argc,argv);
    
    /* valkey may install symlinks like
     * redis-server -> valkey-server, redis-check-rdb -> valkey-check-rdb,
     * redis-check-aof -> valkey-check-aof, etc. */
    if (strstr(exec_name,"redis-check-rdb") != NULL)
        redis_check_rdb_main(argc, argv, NULL);
    else if (strstr(exec_name,"redis-check-aof") != NULL)
        redis_check_aof_main(argc,argv);

    if (argc >= 2) {
        j = 1; /* First option to parse in argv[] */
        sds options = sdsempty();

        /* Handle special options --help and --version */
        if (strcmp(argv[1], "-v") == 0 ||
            strcmp(argv[1], "--version") == 0)
        {
            sds version = getVersion();
            printf("Valkey server %s\n", version);
            sdsfree(version);
            exit(0);
        }
        if (strcmp(argv[1], "--help") == 0 ||
            strcmp(argv[1], "-h") == 0) usage();
        if (strcmp(argv[1], "--test-memory") == 0) {
            if (argc == 3) {
                memtest(atoi(argv[2]),50);
                exit(0);
            } else {
                fprintf(stderr,"Please specify the amount of memory to test in megabytes.\n");
                fprintf(stderr,"Example: ./valkey-server --test-memory 4096\n\n");
                exit(1);
            }
        } if (strcmp(argv[1], "--check-system") == 0) {
            exit(syscheck() ? 0 : 1);
        }
        /* Parse command line options
         * Precedence wise, File, stdin, explicit options -- last config is the one that matters.
         *
         * First argument is the config file name? */
        if (argv[1][0] != '-') {
            /* Replace the config file in server.exec_argv with its absolute path. */
            server.configfile = getAbsolutePath(argv[1]);
            zfree(server.exec_argv[1]);
            server.exec_argv[1] = zstrdup(server.configfile);
            j = 2; // Skip this arg when parsing options
        }
        sds *argv_tmp;
        int argc_tmp;
        int handled_last_config_arg = 1;
        while(j < argc) {
            /* Either first or last argument - Should we read config from stdin? */
            if (argv[j][0] == '-' && argv[j][1] == '\0' && (j == 1 || j == argc-1)) {
                config_from_stdin = 1;
            }
            /* All the other options are parsed and conceptually appended to the
             * configuration file. For instance --port 6380 will generate the
             * string "port 6380\n" to be parsed after the actual config file
             * and stdin input are parsed (if they exist).
             * Only consider that if the last config has at least one argument. */
            else if (handled_last_config_arg && argv[j][0] == '-' && argv[j][1] == '-') {
                /* Option name */
                if (sdslen(options)) options = sdscat(options,"\n");
                /* argv[j]+2 for removing the preceding `--` */
                options = sdscat(options,argv[j]+2);
                options = sdscat(options," ");

                argv_tmp = sdssplitargs(argv[j], &argc_tmp);
                if (argc_tmp == 1) {
                    /* Means that we only have one option name, like --port or "--port " */
                    handled_last_config_arg = 0;

                    if ((j != argc-1) && argv[j+1][0] == '-' && argv[j+1][1] == '-' &&
                        !strcasecmp(argv[j], "--save"))
                    {
                        /* Special case: handle some things like `--save --config value`.
                         * In this case, if next argument starts with `--`, we will reset
                         * handled_last_config_arg flag and append an empty "" config value
                         * to the options, so it will become `--save "" --config value`.
                         * We are doing it to be compatible with pre 7.0 behavior (which we
                         * break it in #10660, 7.0.1), since there might be users who generate
                         * a command line from an array and when it's empty that's what they produce. */
                        options = sdscat(options, "\"\"");
                        handled_last_config_arg = 1;
                    }
                    else if ((j == argc-1) && !strcasecmp(argv[j], "--save")) {
                        /* Special case: when empty save is the last argument.
                         * In this case, we append an empty "" config value to the options,
                         * so it will become `--save ""` and will follow the same reset thing. */
                        options = sdscat(options, "\"\"");
                    }
                    else if ((j != argc-1) && argv[j+1][0] == '-' && argv[j+1][1] == '-' &&
                        !strcasecmp(argv[j], "--sentinel"))
                    {
                        /* Special case: handle some things like `--sentinel --config value`.
                         * It is a pseudo config option with no value. In this case, if next
                         * argument starts with `--`, we will reset handled_last_config_arg flag.
                         * We are doing it to be compatible with pre 7.0 behavior (which we
                         * break it in #10660, 7.0.1). */
                        options = sdscat(options, "");
                        handled_last_config_arg = 1;
                    }
                    else if ((j == argc-1) && !strcasecmp(argv[j], "--sentinel")) {
                        /* Special case: when --sentinel is the last argument.
                         * It is a pseudo config option with no value. In this case, do nothing.
                         * We are doing it to be compatible with pre 7.0 behavior (which we
                         * break it in #10660, 7.0.1). */
                        options = sdscat(options, "");
                    }
                } else {
                    /* Means that we are passing both config name and it's value in the same arg,
                     * like "--port 6380", so we need to reset handled_last_config_arg flag. */
                    handled_last_config_arg = 1;
                }
                sdsfreesplitres(argv_tmp, argc_tmp);
            } else {
                /* Option argument */
                options = sdscatrepr(options,argv[j],strlen(argv[j]));
                options = sdscat(options," ");
                handled_last_config_arg = 1;
            }
            j++;
        }

        loadServerConfig(server.configfile, config_from_stdin, options);
        if (server.sentinel_mode) loadSentinelConfigFromQueue();
        sdsfree(options);
    }
    if (server.sentinel_mode) sentinelCheckConfigFile();

    /* Do system checks */
#ifdef __linux__
    linuxMemoryWarnings();
    sds err_msg = NULL;
    if (checkXenClocksource(&err_msg) < 0) {
        serverLog(LL_WARNING, "WARNING %s", err_msg);
        sdsfree(err_msg);
    }
#if defined (__arm64__)
    int ret;
    if ((ret = checkLinuxMadvFreeForkBug(&err_msg)) <= 0) {
        if (ret < 0) {
            serverLog(LL_WARNING, "WARNING %s", err_msg);
            sdsfree(err_msg);
        } else
            serverLog(LL_WARNING, "Failed to test the kernel for a bug that could lead to data corruption during background save. "
                                  "Your system could be affected, please report this error.");
        if (!checkIgnoreWarning("ARM64-COW-BUG")) {
            serverLog(LL_WARNING,"Valkey will now exit to prevent data corruption. "
                                 "Note that it is possible to suppress this warning by setting the following config: ignore-warnings ARM64-COW-BUG");
            exit(1);
        }
    }
#endif /* __arm64__ */
#endif /* __linux__ */

    /* Daemonize if needed */
    server.supervised = serverIsSupervised(server.supervised_mode);
    int background = server.daemonize && !server.supervised;
    if (background) daemonize();

    serverLog(LL_NOTICE, "oO0OoO0OoO0Oo Valkey is starting oO0OoO0OoO0Oo");
    serverLog(LL_NOTICE, "Valkey version=%s, bits=%d, commit=%s, modified=%d, pid=%d, just started",
            VALKEY_VERSION,
            (sizeof(long) == 8) ? 64 : 32,
            serverGitSHA1(),
            strtol(serverGitDirty(),NULL,10) > 0,
            (int)getpid());

    if (argc == 1) {
        serverLog(LL_WARNING, "Warning: no config file specified, using the default config. In order to specify a config file use %s /path/to/valkey.conf", argv[0]);
    } else {
        serverLog(LL_NOTICE, "Configuration loaded");
    }

    initServer();
    if (background || server.pidfile) createPidFile();
    if (server.set_proc_title) serverSetProcTitle(NULL);
    serverAsciiArt();
    checkTcpBacklogSettings();
    if (server.cluster_enabled) {
        clusterInit();
    }
    if (!server.sentinel_mode) {
        moduleInitModulesSystemLast();
        moduleLoadFromQueue();
    }
    ACLLoadUsersAtStartup();
    initListeners();
    if (server.cluster_enabled) {
        clusterInitLast();
    }
    InitServerLast();

    if (!server.sentinel_mode) {
        /* Things not needed when running in Sentinel mode. */
        serverLog(LL_NOTICE,"Server initialized");
        aofLoadManifestFromDisk();
        loadDataFromDisk();
        aofOpenIfNeededOnServerStart();
        aofDelHistoryFiles();
        if (server.cluster_enabled) {
            serverAssert(verifyClusterConfigWithData() == C_OK);
        }

        for (j = 0; j < CONN_TYPE_MAX; j++) {
            connListener *listener = &server.listeners[j];
            if (listener->ct == NULL)
                continue;

            serverLog(LL_NOTICE,"Ready to accept connections %s", listener->ct->get_type(NULL));
        }

        if (server.supervised_mode == SUPERVISED_SYSTEMD) {
            if (!server.masterhost) {
                serverCommunicateSystemd("STATUS=Ready to accept connections\n");
            } else {
                serverCommunicateSystemd("STATUS=Ready to accept connections in read-only mode. Waiting for MASTER <-> REPLICA sync\n");
            }
            serverCommunicateSystemd("READY=1\n");
        }
    } else {
        sentinelIsRunning();
        if (server.supervised_mode == SUPERVISED_SYSTEMD) {
            serverCommunicateSystemd("STATUS=Ready to accept connections\n");
            serverCommunicateSystemd("READY=1\n");
        }
    }

    /* Warning the user about suspicious maxmemory setting. */
    if (server.maxmemory > 0 && server.maxmemory < 1024*1024) {
        serverLog(LL_WARNING,"WARNING: You specified a maxmemory value that is less than 1MB (current value is %llu bytes). Are you sure this is what you really want?", server.maxmemory);
    }

    serverSetCpuAffinity(server.server_cpulist);
    setOOMScoreAdj(-1);

    aeMain(server.el);
    aeDeleteEventLoop(server.el);
    return 0;
}

/* The End */