Check if Sonoff RF Bridge R2 hardware direct/bypass hack works

[mortenmoulder]

I have successfully installed Tasmota on my new RF Bridge R2 2.2. I used RFLink32 before, which showed that messages are coming in, but they are not being decoded.

I cut the traces according to this documentation: https://github.com/schmurtzm/RFLink32-For-Sonoff-RF-Bridge

And then I applied this configuration to Tasmota: {"NAME":"RFB v2.2","GPIO":[1,1,1,1,1152,1120,1,1,1,288,1,1,1,1],"FLAG":0,"BASE":18}

Then I opened the console and pressed some buttons on my remote, but nothing showed up. I am not entirely sure what to do.

My remote is a Dooya DC90 for my awning.

[Baggerpk]

Hi.. I got the same Problem.. How can help?

[Baggerpk]

I found out the Problem !
The Sonoff RF Bridge R2 has to be flashed with tasmota-sensors.bin !