HA Dash Card Shows 0 degrees With ESPHome “IR Remote Climate” Function

[galvheim]

Hi,

I feel I have exhausted most options and are still stuck on this 0 degrees on my Climate Card for my ESPHome Heatpump IR Remote Emulator.

Here's my YAML:

esphome:
  name: stue-media
  friendly_name: Stue Media
  on_boot:
    then:
      - media_player.volume_set: 50%

esp32:
  board: esp-wrover-kit
  framework:
    type: arduino
    version: recommended 

# Enable logging
logger:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
#  power_save_mode: none

# Enable Home Assistant API

api:

psram:
  mode: octal
  speed: 80MHz

# Enable fallback hotspot (captive portal) in case wifi connection fails
#  ap:
#    ssid: "Esphome-Web-51F8Dc"
#    password: "1XVM6i9bMn1i"

# captive_portal:

i2s_audio:
  - id: i2s_amp
    i2s_lrclk_pin: 25
    i2s_bclk_pin: 26

media_player:
  - platform: i2s_audio
    id: audio_out
    name: Stue Player
    dac_type: external
    i2s_audio_id: i2s_amp
    i2s_dout_pin: 14
    mode: mono
#    on_pause:
#      - media_player.stop

button:
  # Restart the ESP
  - platform: restart
    name: "Restart"

remote_transmitter:
  pin: 33
  carrier_duty_percent: 50%

sensor:
  - platform: homeassistant
    id: temperatur_stue
    entity_id: sensor.atc_43f8_temperature
    unit_of_measurement: "°C"
    device_class: "temperature"
    state_class: "measurement"
    accuracy_decimals: 1

climate:
  - platform: mitsubishi
    name: "Varmepumpe"
    set_fan_mode: "quiet_4levels"
    supports_dry: "true"
    supports_fan_only: "true"
    horizontal_default: "left"
    vertical_default: "down"
    sensor: temperatur_stue

Here is my log:

INFO ESPHome 2024.3.2
INFO Reading configuration /config/esphome/stue-media.yaml...
INFO Starting log output from 192.168.0.137 using esphome API
INFO Successfully connected to stue-media @ 192.168.0.137 in 0.031s
INFO Successful handshake with stue-media @ 192.168.0.137 in 0.104s
[15:22:13][I][app:102]: ESPHome version 2024.3.2 compiled on Apr  8 2024, 14:39:22
[15:22:13][C][wifi:580]: WiFi:
[15:22:13][C][wifi:408]:   Local MAC: B0:B2:1C:51:EF:C8
[15:22:13][C][wifi:413]:   SSID: 'Alvhjelm'[redacted]
[15:22:13][C][wifi:416]:   IP Address: 192.168.0.137
[15:22:13][C][wifi:420]:   BSSID: 1E:61:B4:28:D8:26[redacted]
[15:22:13][C][wifi:421]:   Hostname: 'stue-media'
[15:22:13][C][wifi:423]:   Signal strength: -39 dB ▂▄▆█
[15:22:13][C][wifi:427]:   Channel: 6
[15:22:13][C][wifi:428]:   Subnet: 255.255.255.0
[15:22:13][C][wifi:429]:   Gateway: 192.168.0.1
[15:22:13][C][wifi:430]:   DNS1: 192.168.0.1
[15:22:13][C][wifi:431]:   DNS2: 192.168.0.1
[15:22:13][C][logger:166]: Logger:
[15:22:13][C][logger:167]:   Level: DEBUG
[15:22:13][C][logger:169]:   Log Baud Rate: 115200
[15:22:13][C][logger:170]:   Hardware UART: UART0
[15:22:13][C][psram:020]: PSRAM:
[15:22:13][C][psram:021]:   Available: YES
[15:22:13][C][psram:024]:   Size: 4095 KB
[15:22:13][C][restart.button:017]: Restart Button 'Restart'
[15:22:13][C][remote_transmitter:015]: Remote Transmitter...
[15:22:13][C][remote_transmitter:016]:   Channel: 0
[15:22:13][C][remote_transmitter:017]:   RMT memory blocks: 1
[15:22:13][C][remote_transmitter:018]:   Clock divider: 80
[15:22:13][C][remote_transmitter:019]:   Pin: GPIO33
[15:22:13][C][remote_transmitter:022]:     Carrier Duty: 50%
[15:22:13][C][climate_ir:076]: IR Climate 'Varmepumpe'
[15:22:13][C][climate_ir:077]:   Min. Temperature: 16.0°C
[15:22:13][C][climate_ir:078]:   Max. Temperature: 31.0°C
[15:22:13][C][climate_ir:079]:   Supports HEAT: YES
[15:22:13][C][climate_ir:080]:   Supports COOL: YES
[15:22:13][C][mdns:115]: mDNS:
[15:22:13][C][mdns:116]:   Hostname: stue-media
[15:22:13][C][ota:096]: Over-The-Air Updates:
[15:22:13][C][ota:097]:   Address: stue-media.local:3232
[15:22:13][C][ota:100]:   Using Password.
[15:22:13][C][ota:103]:   OTA version: 2.
[15:22:13][C][api:139]: API Server:
[15:22:13][C][api:140]:   Address: stue-media.local:6053
[15:22:13][C][api:142]:   Using noise encryption: YES
[15:22:13][C][homeassistant.sensor:030]: Homeassistant Sensor 'temperatur_stue'
[15:22:13][C][homeassistant.sensor:030]:   State Class: ''
[15:22:13][C][homeassistant.sensor:030]:   Unit of Measurement: ''
[15:22:13][C][homeassistant.sensor:030]:   Accuracy Decimals: 1
[15:22:13][C][homeassistant.sensor:031]:   Entity ID: 'sensor.atc_43f8_temperature'
[15:22:13][C][audio:203]: Audio:
[15:22:13][C][audio:225]:   External DAC channels: 1
[15:22:13][C][audio:226]:   I2S DOUT Pin: 14
[15:22:22][D][homeassistant.sensor:024]: 'sensor.atc_43f8_temperature': Got state 23.29
[15:22:22][D][sensor:094]: 'temperatur_stue': Sending state 23.29000  with 1 decimals of accuracy
[15:22:22][D][climate:396]: 'Varmepumpe' - Sending state:
[15:22:22][D][climate:399]:   Mode: HEAT
[15:22:22][D][climate:404]:   Fan Mode: AUTO
[15:22:22][D][climate:410]:   Preset: NONE
[15:22:22][D][climate:416]:   Swing Mode: OFF
[15:22:22][D][climate:425]:   Target Temperature: 23.00°C

I am really not sure what to do...
I guess anyone with a a unit to test with can upload the code and see if they can get any of their sensor to show up in the climate card that ESPHome makes from this. You just need code and a plain ESP. Nothing need to be attached.