You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Good Afternoon. I have an ESP32 that is monitoring the temperature of my cold and hot water in my home. Since the update the temperature readings have been really off. I have reverted to 1.18 and everything is working fine. I will include my yaml and the logs from both 1.18 version and 1.19.x
I marked the issues in the log in bold print, to make it easier to find. Also, this is my first Github post, so if I did something wrong, please let me know!
1.19 log:
INFO OTA successful
INFO Successfully uploaded program.
INFO Starting log output from 618_blueshutters_basement.local using esphome API
INFO Connecting to 618_blueshutters_basement.local:6053 (192.168.254.52)
INFO Successfully connected to 618_blueshutters_basement.local
[11:59:59][I][app:105]: ESPHome version 1.19.4 compiled on Jun 24 2021, 11:59:21
[11:59:59][C][wifi:484]: WiFi:
[11:59:59][C][wifi:344]: SSID: [redacted]
[11:59:59][C][wifi:345]: IP Address: 192.168.254.52
[11:59:59][C][wifi:347]: BSSID: [redacted]
[11:59:59][C][wifi:348]: Hostname: '618_blueshutters_basement'
[11:59:59][C][wifi:352]: Signal strength: -63 dB ▂▄▆█
[11:59:59][C][wifi:356]: Channel: 11
[11:59:59][C][wifi:357]: Subnet: 255.255.255.0
[11:59:59][C][wifi:358]: Gateway: 192.168.254.1
[11:59:59][C][wifi:359]: DNS1: 172.16.1.99
[11:59:59][C][wifi:360]: DNS2: 172.16.1.98
[11:59:59][C][switch.gpio:048]: GPIO Switch 'MainWaterOn'
[11:59:59][C][switch.gpio:048]: Inverted: YES
[11:59:59][C][switch.gpio:049]: Pin: GPIO16 (Mode: OUTPUT)
[11:59:59][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[11:59:59][C][switch.gpio:073]: Interlocks:
[11:59:59][C][switch.gpio:077]: MainWaterOff
[11:59:59][C][template.switch:058]: Template Switch 'MainWaterOnTP'
[11:59:59][C][template.switch:059]: Restore State: NO
[11:59:59][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'MainWaterOff'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO17 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: MainWaterOn
[12:00:00][C][template.switch:058]: Template Switch 'MainWaterOffTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'HydroponicsOn'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO25 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: HydroponicsOff
[12:00:00][C][template.switch:058]: Template Switch 'HydroponicsOnTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'HydroponicsOff'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO26 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: HydroponicsOn
[12:00:00][C][template.switch:058]: Template Switch 'HydroponicsOffTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Water Pump Cycle'
[12:00:00][C][gpio.binary_sensor:015]: Device Class: 'power'
[12:00:00][C][gpio.binary_sensor:016]: Pin: GPIO2 (Mode: INPUT_PULLDOWN)
[12:00:00][C][logger:189]: Logger:
[12:00:00][C][logger:190]: Level: DEBUG
[12:00:00][C][logger:191]: Log Baud Rate: 115200
[12:00:00][C][logger:192]: Hardware UART: UART0
[12:00:00][C][status:034]: Status Binary Sensor 'Basement ESP32 Status'
[12:00:00][C][status:034]: Device Class: 'connectivity'
[12:00:00][C][ntc:014]: NTC Sensor 'Cold Water Temperature'
[12:00:00][C][ntc:014]: Device Class: 'temperature'
[12:00:00][C][ntc:014]: State Class: 'measurement'
[12:00:00][C][ntc:014]: Unit of Measurement: '°C'
[12:00:00][C][ntc:014]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Resistance Sensor 'Cold_Water_Temp'
[12:00:00][C][resistance:010]: State Class: 'measurement'
[12:00:00][C][resistance:010]: Unit of Measurement: 'Ω'
[12:00:00][C][resistance:010]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Icon: 'mdi:flash'
[12:00:00][C][resistance:011]: Configuration: UPSTREAM
[12:00:00][C][resistance:012]: Resistor: 10000.00Ω
[12:00:00][C][resistance:013]: Reference Voltage: 3.3V
[12:00:00][C][adc:028]: ADC Sensor 'cold_sensor'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 39
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][ntc:014]: NTC Sensor 'Hot Water Temperature'
[12:00:00][C][ntc:014]: Device Class: 'temperature'
[12:00:00][C][ntc:014]: State Class: 'measurement'
[12:00:00][C][ntc:014]: Unit of Measurement: '°C'
[12:00:00][C][ntc:014]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Resistance Sensor 'Hot_Water_Temp'
[12:00:00][C][resistance:010]: State Class: 'measurement'
[12:00:00][C][resistance:010]: Unit of Measurement: 'Ω'
[12:00:00][C][resistance:010]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Icon: 'mdi:flash'
[12:00:00][C][resistance:011]: Configuration: UPSTREAM
[12:00:00][C][resistance:012]: Resistor: 10000.00Ω
[12:00:00][C][resistance:013]: Reference Voltage: 3.3V
[12:00:00][C][adc:028]: ADC Sensor 'hot_sensor'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 36
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][adc:028]: ADC Sensor 'Prefilter'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 34
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][adc:028]: ADC Sensor 'Postfilter'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 35
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][dht:017]: DHT:
[12:00:00][C][dht:018]: Pin: GPIO5 (Mode: INPUT)
[12:00:00][C][dht:024]: Model: DHT22 (or equivalent)
[12:00:00][C][dht:027]: Update Interval: 60.0s
[12:00:00][C][dht:029]: Temperature 'Basement Temperature'
[12:00:00][C][dht:029]: Device Class: 'temperature'
[12:00:00][C][dht:029]: State Class: 'measurement'
[12:00:00][C][dht:029]: Unit of Measurement: '°C'
[12:00:00][C][dht:029]: Accuracy Decimals: 1
[12:00:00][C][dht:030]: Humidity 'Basement Humidity'
[12:00:00][C][dht:030]: Device Class: 'humidity'
[12:00:00][C][dht:030]: State Class: 'measurement'
[12:00:00][C][dht:030]: Unit of Measurement: '%'
[12:00:00][C][dht:030]: Accuracy Decimals: 0
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Cold Water Flow'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:water'
[12:00:00][C][pulse_counter:148]: Pin: GPIO18 (Mode: INPUT)
[12:00:00][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:00:00][C][pulse_counter:150]: Falling Edge: DISABLE
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Hot Water Flow'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:water'
[12:00:00][C][pulse_counter:148]: Pin: GPIO19 (Mode: INPUT)
[12:00:00][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:00:00][C][pulse_counter:150]: Falling Edge: DISABLE
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Water Heater Status'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'pulses/min'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:pulse'
[12:00:00][C][pulse_counter:148]: Pin: GPIO14 (Mode: INPUT_PULLDOWN)
[12:00:00][C][pulse_counter:149]: Rising Edge: DISABLE
[12:00:00][C][pulse_counter:150]: Falling Edge: INCREMENT
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:01][C][homeassistant.time:010]: Home Assistant Time:
[12:00:01][C][homeassistant.time:011]: Timezone: 'EST5EDT4,M3.2.0/2,M11.1.0/2'
[12:00:01][C][captive_portal:148]: Captive Portal:
[12:00:01][C][ota:029]: Over-The-Air Updates:
[12:00:01][C][ota:030]: Address: 618_blueshutters_basement.local:3232
[12:00:01][C][ota:032]: Using Password.
[12:00:01][C][api:095]: API Server:
[12:00:01][C][api:096]: Address: 618_blueshutters_basement.local:6053
[12:00:30][D][adc:058]: 'Postfilter': Got voltage=0.00V
[12:00:30][D][sensor:117]: 'Postfilter': Sending state 0.00000 V with 2 decimals of accuracy
[12:00:32][D][pulse_counter:159]: 'Water Heater Status': Retrieved counter: 96.00 pulses/min
[12:00:33][D][adc:058]: 'hot_sensor': Got voltage=0.36V
[12:00:33][D][sensor:117]: 'hot_sensor': Sending state 0.35780 V with 2 decimals of accuracy
[12:00:33][D][resistance:037]: 'Hot_Water_Temp' - Resistance 82229.7Ω
[12:00:33][D][sensor:117]: 'Hot_Water_Temp': Sending state 82229.72656 Ω with 1 decimals of accuracy
[12:00:33][D][ntc:026]: 'Hot Water Temperature' - Temperature: 14.7°C
[12:00:33][D][sensor:117]: 'Hot Water Temperature': Sending state 14.65861 °C with 1 decimals of accuracy
[12:00:35][D][sensor:117]: 'Water Heater Status': Sending state 96.00000 pulses/min with 2 decimals of accuracy
[12:00:41][D][dht:048]: Got Temperature=18.6°C Humidity=69.9%
[12:00:41][D][sensor:117]: 'Basement Temperature': Sending state 18.60000 °C with 1 decimals of accuracy
[12:00:41][D][sensor:117]: 'Basement Humidity': Sending state 69.90000 % with 0 decimals of accuracy
[12:00:41][D][adc:058]: 'cold_sensor': Got voltage=0.16V
[12:00:41][D][sensor:117]: 'cold_sensor': Sending state 0.16332 V with 2 decimals of accuracy
[12:00:41][D][resistance:037]: 'Cold_Water_Temp' - Resistance 192055.9Ω
[12:00:41][D][sensor:117]: 'Cold_Water_Temp': Sending state 192055.89062 Ω with 1 decimals of accuracy
[12:00:41][D][ntc:026]: 'Cold Water Temperature' - Temperature: -1.7°C
[12:00:41][D][sensor:117]: 'Cold Water Temperature': Sending state -1.66041 °C with 1 decimals of accuracy
[12:00:48][D][pulse_counter:159]: 'Cold Water Flow': Retrieved counter: 0.00 pulses/min
[12:00:48][D][sensor:117]: 'Cold Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:00:48][D][pulse_counter:159]: 'Hot Water Flow': Retrieved counter: 0.00 pulses/min
[12:00:48][D][sensor:117]: 'Hot Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:00:50][D][adc:058]: 'Prefilter': Got voltage=0.00V
[12:00:50][D][sensor:117]: 'Prefilter': Sending state 0.00000 V with 2 decimals of accuracy
[12:08:50][D][resistance:037]: 'Cold_Water_Temp' - Resistance 83351.0Ω
[12:08:50][D][sensor:099]: 'Cold_Water_Temp': Sending state 83351.04688 Ω with 1 decimals of accuracy
[12:08:50][D][ntc:026]: 'Cold Water Temperature' - Temperature: 14.4°C
[12:08:50][D][sensor:099]: 'Cold Water Temperature': Sending state 14.38544 °C with 1 decimals of accuracy
[12:09:00][D][adc:058]: 'Postfilter': Got voltage=0.07V
[12:09:00][D][sensor:099]: 'Postfilter': Sending state 0.06930 V with 2 decimals of accuracy
[12:09:01][D][adc:058]: 'hot_sensor': Got voltage=0.68V
[12:09:01][D][sensor:099]: 'hot_sensor': Sending state 0.67961 V with 2 decimals of accuracy
[12:09:01][D][resistance:037]: 'Hot_Water_Temp' - Resistance 38557.3Ω
[12:09:01][D][sensor:099]: 'Hot_Water_Temp': Sending state 38557.30859 Ω with 1 decimals of accuracy
[12:09:01][D][ntc:026]: 'Hot Water Temperature' - Temperature: 30.7°C
[12:09:01][D][sensor:099]: 'Hot Water Temperature': Sending state 30.65219 °C with 1 decimals of accuracy
[12:09:07][D][pulse_counter:159]: 'Cold Water Flow': Retrieved counter: 0.00 pulses/min
[12:09:07][D][sensor:099]: 'Cold Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:09:10][D][pulse_counter:159]: 'Water Heater Status': Retrieved counter: 144.00 pulses/min
[12:09:11][D][adc:058]: 'Prefilter': Got voltage=0.21V
[12:09:11][D][sensor:099]: 'Prefilter': Sending state 0.20576 V with 2 decimals of accuracy
[12:09:11][D][pulse_counter:159]: 'Hot Water Flow': Retrieved counter: 0.00 pulses/min
[12:09:11][D][sensor:099]: 'Hot Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:09:12][D][sensor:099]: 'Water Heater Status': Sending state 144.00000 pulses/min with 2 decimals of accuracy
The text was updated successfully, but these errors were encountered:
Good Afternoon. I have an ESP32 that is monitoring the temperature of my cold and hot water in my home. Since the update the temperature readings have been really off. I have reverted to 1.18 and everything is working fine. I will include my yaml and the logs from both 1.18 version and 1.19.x
I marked the issues in the log in bold print, to make it easier to find. Also, this is my first Github post, so if I did something wrong, please let me know!
Thanks!
Keith
esphome:
name: 618_blueshutters_basement
platform: ESP32
board: esp-wrover-kit
wifi:
ssid:
password:
captive_portal:
switch:
platform: gpio
pin: 16
inverted: yes
id: MainWaterOn
interlock: [MainWaterOff]
platform: template
id: MainWaterOnTP
turn_on_action:
platform: gpio
pin: 17
inverted: yes
id: MainWaterOff
interlock: [MainWaterOn]
platform: template
id: MainWaterOffTP
turn_on_action:
platform: gpio
pin: 25
inverted: yes
id: HydroponicsOn
interlock: [HydroponicsOff]
platform: template
id: HydroponicsOnTP
turn_on_action:
platform: gpio
pin: 26
inverted: yes
id: HydroponicsOff
interlock: [HydroponicsOn]
platform: template
id: HydroponicsOffTP
turn_on_action:
#Water Pump Cycle
binary_sensor:
device_class: power
name: "Water Pump Cycle"
pin:
number: 2
mode: INPUT_PULLDOWN
ESP32 Status
name: "Basement ESP32 Status"
sensor:
#Cold Water Temp
sensor: Cold_Water_Temp
calibration:
name: Cold Water Temperature
#Cold Water Temp - source sensor
id: Cold_Water_Temp
sensor: cold_sensor
configuration: UPSTREAM
resistor: 10kOhm
reference_voltage: 3.3
attenuation: 6db
id: cold_sensor
pin: 39
#Hot Water Temp
sensor: Hot_Water_Temp
calibration:
name: Hot Water Temperature
#Hot Water Temp - source sensor
id: Hot_Water_Temp
sensor: hot_sensor
configuration: UPSTREAM
resistor: 10kOhm
reference_voltage: 3.3
attenuation: 6db
id: hot_sensor
pin: 36
#Water Pressure - Prefilter
attenuation: 6db
id: prefilter_sensor
pin: 34
name: Prefilter
#Water Pressure - Postfilter
attenuation: 6db
id: postfilter_sensor
pin: 35
name: Postfilter
#Air Temp / Hum
pin: 5
model: DHT22
temperature:
name: "Basement Temperature"
humidity:
name: "Basement Humidity"
update_interval: 60s
#Cold Water GPM
pin:
number: 18
name: "Cold Water Flow"
icon: mdi:water
id: cold_water_gpm
filters:
unit_of_measurement: "GPM"
#Hot Water GPM
pin:
number: 19
name: "Hot Water Flow"
icon: mdi:water
id: hot_water_gpm
filters:
unit_of_measurement: "GPM"
#Water Heater Status
pin:
number: 14
mode: input_pulldown
name: "Water Heater Status"
count_mode:
rising_edge: disable
falling_edge: increment
filters:
debounce: 2.5s
time:
id: homeassistant_time
Enable logging
logger:
Enable Home Assistant API
api:
password:
ota:
password:
1.19 log:
INFO OTA successful
INFO Successfully uploaded program.
INFO Starting log output from 618_blueshutters_basement.local using esphome API
INFO Connecting to 618_blueshutters_basement.local:6053 (192.168.254.52)
INFO Successfully connected to 618_blueshutters_basement.local
[11:59:59][I][app:105]: ESPHome version 1.19.4 compiled on Jun 24 2021, 11:59:21
[11:59:59][C][wifi:484]: WiFi:
[11:59:59][C][wifi:344]: SSID: [redacted]
[11:59:59][C][wifi:345]: IP Address: 192.168.254.52
[11:59:59][C][wifi:347]: BSSID: [redacted]
[11:59:59][C][wifi:348]: Hostname: '618_blueshutters_basement'
[11:59:59][C][wifi:352]: Signal strength: -63 dB ▂▄▆█
[11:59:59][C][wifi:356]: Channel: 11
[11:59:59][C][wifi:357]: Subnet: 255.255.255.0
[11:59:59][C][wifi:358]: Gateway: 192.168.254.1
[11:59:59][C][wifi:359]: DNS1: 172.16.1.99
[11:59:59][C][wifi:360]: DNS2: 172.16.1.98
[11:59:59][C][switch.gpio:048]: GPIO Switch 'MainWaterOn'
[11:59:59][C][switch.gpio:048]: Inverted: YES
[11:59:59][C][switch.gpio:049]: Pin: GPIO16 (Mode: OUTPUT)
[11:59:59][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[11:59:59][C][switch.gpio:073]: Interlocks:
[11:59:59][C][switch.gpio:077]: MainWaterOff
[11:59:59][C][template.switch:058]: Template Switch 'MainWaterOnTP'
[11:59:59][C][template.switch:059]: Restore State: NO
[11:59:59][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'MainWaterOff'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO17 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: MainWaterOn
[12:00:00][C][template.switch:058]: Template Switch 'MainWaterOffTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'HydroponicsOn'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO25 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: HydroponicsOff
[12:00:00][C][template.switch:058]: Template Switch 'HydroponicsOnTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][switch.gpio:048]: GPIO Switch 'HydroponicsOff'
[12:00:00][C][switch.gpio:048]: Inverted: YES
[12:00:00][C][switch.gpio:049]: Pin: GPIO26 (Mode: OUTPUT)
[12:00:00][C][switch.gpio:071]: Restore Mode: Restore (Defaults to OFF)
[12:00:00][C][switch.gpio:073]: Interlocks:
[12:00:00][C][switch.gpio:077]: HydroponicsOn
[12:00:00][C][template.switch:058]: Template Switch 'HydroponicsOffTP'
[12:00:00][C][template.switch:059]: Restore State: NO
[12:00:00][C][template.switch:060]: Optimistic: NO
[12:00:00][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Water Pump Cycle'
[12:00:00][C][gpio.binary_sensor:015]: Device Class: 'power'
[12:00:00][C][gpio.binary_sensor:016]: Pin: GPIO2 (Mode: INPUT_PULLDOWN)
[12:00:00][C][logger:189]: Logger:
[12:00:00][C][logger:190]: Level: DEBUG
[12:00:00][C][logger:191]: Log Baud Rate: 115200
[12:00:00][C][logger:192]: Hardware UART: UART0
[12:00:00][C][status:034]: Status Binary Sensor 'Basement ESP32 Status'
[12:00:00][C][status:034]: Device Class: 'connectivity'
[12:00:00][C][ntc:014]: NTC Sensor 'Cold Water Temperature'
[12:00:00][C][ntc:014]: Device Class: 'temperature'
[12:00:00][C][ntc:014]: State Class: 'measurement'
[12:00:00][C][ntc:014]: Unit of Measurement: '°C'
[12:00:00][C][ntc:014]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Resistance Sensor 'Cold_Water_Temp'
[12:00:00][C][resistance:010]: State Class: 'measurement'
[12:00:00][C][resistance:010]: Unit of Measurement: 'Ω'
[12:00:00][C][resistance:010]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Icon: 'mdi:flash'
[12:00:00][C][resistance:011]: Configuration: UPSTREAM
[12:00:00][C][resistance:012]: Resistor: 10000.00Ω
[12:00:00][C][resistance:013]: Reference Voltage: 3.3V
[12:00:00][C][adc:028]: ADC Sensor 'cold_sensor'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 39
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][ntc:014]: NTC Sensor 'Hot Water Temperature'
[12:00:00][C][ntc:014]: Device Class: 'temperature'
[12:00:00][C][ntc:014]: State Class: 'measurement'
[12:00:00][C][ntc:014]: Unit of Measurement: '°C'
[12:00:00][C][ntc:014]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Resistance Sensor 'Hot_Water_Temp'
[12:00:00][C][resistance:010]: State Class: 'measurement'
[12:00:00][C][resistance:010]: Unit of Measurement: 'Ω'
[12:00:00][C][resistance:010]: Accuracy Decimals: 1
[12:00:00][C][resistance:010]: Icon: 'mdi:flash'
[12:00:00][C][resistance:011]: Configuration: UPSTREAM
[12:00:00][C][resistance:012]: Resistor: 10000.00Ω
[12:00:00][C][resistance:013]: Reference Voltage: 3.3V
[12:00:00][C][adc:028]: ADC Sensor 'hot_sensor'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 36
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][adc:028]: ADC Sensor 'Prefilter'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 34
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][adc:028]: ADC Sensor 'Postfilter'
[12:00:00][C][adc:028]: Device Class: 'voltage'
[12:00:00][C][adc:028]: State Class: 'measurement'
[12:00:00][C][adc:028]: Unit of Measurement: 'V'
[12:00:00][C][adc:028]: Accuracy Decimals: 2
[12:00:00][C][adc:037]: Pin: 35
[12:00:00][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:00:00][C][adc:053]: Update Interval: 60.0s
[12:00:00][C][dht:017]: DHT:
[12:00:00][C][dht:018]: Pin: GPIO5 (Mode: INPUT)
[12:00:00][C][dht:024]: Model: DHT22 (or equivalent)
[12:00:00][C][dht:027]: Update Interval: 60.0s
[12:00:00][C][dht:029]: Temperature 'Basement Temperature'
[12:00:00][C][dht:029]: Device Class: 'temperature'
[12:00:00][C][dht:029]: State Class: 'measurement'
[12:00:00][C][dht:029]: Unit of Measurement: '°C'
[12:00:00][C][dht:029]: Accuracy Decimals: 1
[12:00:00][C][dht:030]: Humidity 'Basement Humidity'
[12:00:00][C][dht:030]: Device Class: 'humidity'
[12:00:00][C][dht:030]: State Class: 'measurement'
[12:00:00][C][dht:030]: Unit of Measurement: '%'
[12:00:00][C][dht:030]: Accuracy Decimals: 0
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Cold Water Flow'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:water'
[12:00:00][C][pulse_counter:148]: Pin: GPIO18 (Mode: INPUT)
[12:00:00][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:00:00][C][pulse_counter:150]: Falling Edge: DISABLE
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Hot Water Flow'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:water'
[12:00:00][C][pulse_counter:148]: Pin: GPIO19 (Mode: INPUT)
[12:00:00][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:00:00][C][pulse_counter:150]: Falling Edge: DISABLE
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:00][C][pulse_counter:147]: Pulse Counter 'Water Heater Status'
[12:00:00][C][pulse_counter:147]: State Class: 'measurement'
[12:00:00][C][pulse_counter:147]: Unit of Measurement: 'pulses/min'
[12:00:00][C][pulse_counter:147]: Accuracy Decimals: 2
[12:00:00][C][pulse_counter:147]: Icon: 'mdi:pulse'
[12:00:00][C][pulse_counter:148]: Pin: GPIO14 (Mode: INPUT_PULLDOWN)
[12:00:00][C][pulse_counter:149]: Rising Edge: DISABLE
[12:00:00][C][pulse_counter:150]: Falling Edge: INCREMENT
[12:00:00][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:00:00][C][pulse_counter:152]: Update Interval: 60.0s
[12:00:01][C][homeassistant.time:010]: Home Assistant Time:
[12:00:01][C][homeassistant.time:011]: Timezone: 'EST5EDT4,M3.2.0/2,M11.1.0/2'
[12:00:01][C][captive_portal:148]: Captive Portal:
[12:00:01][C][ota:029]: Over-The-Air Updates:
[12:00:01][C][ota:030]: Address: 618_blueshutters_basement.local:3232
[12:00:01][C][ota:032]: Using Password.
[12:00:01][C][api:095]: API Server:
[12:00:01][C][api:096]: Address: 618_blueshutters_basement.local:6053
[12:00:30][D][adc:058]: 'Postfilter': Got voltage=0.00V
[12:00:30][D][sensor:117]: 'Postfilter': Sending state 0.00000 V with 2 decimals of accuracy
[12:00:32][D][pulse_counter:159]: 'Water Heater Status': Retrieved counter: 96.00 pulses/min
[12:00:33][D][adc:058]: 'hot_sensor': Got voltage=0.36V
[12:00:33][D][sensor:117]: 'hot_sensor': Sending state 0.35780 V with 2 decimals of accuracy
[12:00:33][D][resistance:037]: 'Hot_Water_Temp' - Resistance 82229.7Ω
[12:00:33][D][sensor:117]: 'Hot_Water_Temp': Sending state 82229.72656 Ω with 1 decimals of accuracy
[12:00:33][D][ntc:026]: 'Hot Water Temperature' - Temperature: 14.7°C
[12:00:33][D][sensor:117]: 'Hot Water Temperature': Sending state 14.65861 °C with 1 decimals of accuracy
[12:00:35][D][sensor:117]: 'Water Heater Status': Sending state 96.00000 pulses/min with 2 decimals of accuracy
[12:00:41][D][dht:048]: Got Temperature=18.6°C Humidity=69.9%
[12:00:41][D][sensor:117]: 'Basement Temperature': Sending state 18.60000 °C with 1 decimals of accuracy
[12:00:41][D][sensor:117]: 'Basement Humidity': Sending state 69.90000 % with 0 decimals of accuracy
[12:00:41][D][adc:058]: 'cold_sensor': Got voltage=0.16V
[12:00:41][D][sensor:117]: 'cold_sensor': Sending state 0.16332 V with 2 decimals of accuracy
[12:00:41][D][resistance:037]: 'Cold_Water_Temp' - Resistance 192055.9Ω
[12:00:41][D][sensor:117]: 'Cold_Water_Temp': Sending state 192055.89062 Ω with 1 decimals of accuracy
[12:00:41][D][ntc:026]: 'Cold Water Temperature' - Temperature: -1.7°C
[12:00:41][D][sensor:117]: 'Cold Water Temperature': Sending state -1.66041 °C with 1 decimals of accuracy
[12:00:48][D][pulse_counter:159]: 'Cold Water Flow': Retrieved counter: 0.00 pulses/min
[12:00:48][D][sensor:117]: 'Cold Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:00:48][D][pulse_counter:159]: 'Hot Water Flow': Retrieved counter: 0.00 pulses/min
[12:00:48][D][sensor:117]: 'Hot Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:00:50][D][adc:058]: 'Prefilter': Got voltage=0.00V
[12:00:50][D][sensor:117]: 'Prefilter': Sending state 0.00000 V with 2 decimals of accuracy
1.18 Log:
NFO Successfully connected to 618_blueshutters_basement.local
[12:08:18][I][app:105]: ESPHome version 1.18.0 compiled on Jun 24 2021, 12:07:34
[12:08:18][C][wifi:443]: WiFi:
[12:08:18][C][wifi:303]: SSID: [redacted]
[12:08:18][C][wifi:304]: IP Address: 192.168.254.52
[12:08:18][C][wifi:306]: BSSID: [redacted]
[12:08:18][C][wifi:307]: Hostname: '618_blueshutters_basement'
[12:08:18][C][wifi:311]: Signal strength: -60 dB ▂▄▆█
[12:08:18][C][wifi:315]: Channel: 11
[12:08:18][C][wifi:316]: Subnet: 255.255.255.0
[12:08:18][C][wifi:317]: Gateway: 192.168.254.1
[12:08:18][C][wifi:318]: DNS1: 172.16.1.99
[12:08:18][C][wifi:319]: DNS2: 172.16.1.98
[12:08:18][C][switch.gpio:042]: GPIO Switch 'MainWaterOn'
[12:08:18][C][switch.gpio:042]: Inverted: YES
[12:08:18][C][switch.gpio:043]: Pin: GPIO16 (Mode: OUTPUT)
[12:08:18][C][switch.gpio:059]: Restore Mode: Restore (Defaults to OFF)
[12:08:18][C][switch.gpio:061]: Interlocks:
[12:08:18][C][switch.gpio:065]: MainWaterOff
[12:08:18][C][template.switch:058]: Template Switch 'MainWaterOnTP'
[12:08:18][C][template.switch:059]: Restore State: NO
[12:08:18][C][template.switch:060]: Optimistic: NO
[12:08:18][C][switch.gpio:042]: GPIO Switch 'MainWaterOff'
[12:08:18][C][switch.gpio:042]: Inverted: YES
[12:08:18][C][switch.gpio:043]: Pin: GPIO17 (Mode: OUTPUT)
[12:08:18][C][switch.gpio:059]: Restore Mode: Restore (Defaults to OFF)
[12:08:18][C][switch.gpio:061]: Interlocks:
[12:08:18][C][switch.gpio:065]: MainWaterOn
[12:08:18][C][template.switch:058]: Template Switch 'MainWaterOffTP'
[12:08:18][C][template.switch:059]: Restore State: NO
[12:08:18][C][template.switch:060]: Optimistic: NO
[12:08:18][C][switch.gpio:042]: GPIO Switch 'HydroponicsOn'
[12:08:18][C][switch.gpio:042]: Inverted: YES
[12:08:18][C][switch.gpio:043]: Pin: GPIO25 (Mode: OUTPUT)
[12:08:18][C][switch.gpio:059]: Restore Mode: Restore (Defaults to OFF)
[12:08:18][C][switch.gpio:061]: Interlocks:
[12:08:18][C][switch.gpio:065]: HydroponicsOff
[12:08:18][C][template.switch:058]: Template Switch 'HydroponicsOnTP'
[12:08:18][C][template.switch:059]: Restore State: NO
[12:08:18][C][template.switch:060]: Optimistic: NO
[12:08:18][C][switch.gpio:042]: GPIO Switch 'HydroponicsOff'
[12:08:18][C][switch.gpio:042]: Inverted: YES
[12:08:18][C][switch.gpio:043]: Pin: GPIO26 (Mode: OUTPUT)
[12:08:18][C][switch.gpio:059]: Restore Mode: Restore (Defaults to OFF)
[12:08:18][C][switch.gpio:061]: Interlocks:
[12:08:18][C][switch.gpio:065]: HydroponicsOn
[12:08:18][C][template.switch:058]: Template Switch 'HydroponicsOffTP'
[12:08:18][C][template.switch:059]: Restore State: NO
[12:08:18][C][template.switch:060]: Optimistic: NO
[12:08:18][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Water Pump Cycle'
[12:08:18][C][gpio.binary_sensor:015]: Device Class: 'power'
[12:08:18][C][gpio.binary_sensor:016]: Pin: GPIO2 (Mode: INPUT_PULLDOWN)
[12:08:18][C][logger:189]: Logger:
[12:08:18][C][logger:190]: Level: DEBUG
[12:08:18][C][logger:191]: Log Baud Rate: 115200
[12:08:18][C][logger:192]: Hardware UART: UART0
[12:08:18][C][status:034]: Status Binary Sensor 'Basement ESP32 Status'
[12:08:18][C][status:034]: Device Class: 'connectivity'
[12:08:18][C][ntc:014]: NTC Sensor 'Cold Water Temperature'
[12:08:18][C][ntc:014]: Device Class: 'temperature'
[12:08:18][C][ntc:014]: Unit of Measurement: '°C'
[12:08:18][C][ntc:014]: Accuracy Decimals: 1
[12:08:18][C][resistance:010]: Resistance Sensor 'Cold_Water_Temp'
[12:08:18][C][resistance:010]: Unit of Measurement: 'Ω'
[12:08:18][C][resistance:010]: Accuracy Decimals: 1
[12:08:18][C][resistance:010]: Icon: 'mdi:flash'
[12:08:18][C][resistance:011]: Configuration: UPSTREAM
[12:08:18][C][resistance:012]: Resistor: 10000.00Ω
[12:08:18][C][resistance:013]: Reference Voltage: 3.3V
[12:08:18][C][adc:028]: ADC Sensor 'cold_sensor'
[12:08:18][C][adc:028]: Device Class: 'voltage'
[12:08:18][C][adc:028]: Unit of Measurement: 'V'
[12:08:18][C][adc:028]: Accuracy Decimals: 2
[12:08:18][C][adc:037]: Pin: 39
[12:08:18][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:08:18][C][adc:053]: Update Interval: 60.0s
[12:08:18][C][ntc:014]: NTC Sensor 'Hot Water Temperature'
[12:08:18][C][ntc:014]: Device Class: 'temperature'
[12:08:18][C][ntc:014]: Unit of Measurement: '°C'
[12:08:18][C][ntc:014]: Accuracy Decimals: 1
[12:08:18][C][resistance:010]: Resistance Sensor 'Hot_Water_Temp'
[12:08:18][C][resistance:010]: Unit of Measurement: 'Ω'
[12:08:18][C][resistance:010]: Accuracy Decimals: 1
[12:08:18][C][resistance:010]: Icon: 'mdi:flash'
[12:08:18][C][resistance:011]: Configuration: UPSTREAM
[12:08:18][C][resistance:012]: Resistor: 10000.00Ω
[12:08:18][C][resistance:013]: Reference Voltage: 3.3V
[12:08:18][C][adc:028]: ADC Sensor 'hot_sensor'
[12:08:18][C][adc:028]: Device Class: 'voltage'
[12:08:18][C][adc:028]: Unit of Measurement: 'V'
[12:08:18][C][adc:028]: Accuracy Decimals: 2
[12:08:18][C][adc:037]: Pin: 36
[12:08:18][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:08:18][C][adc:053]: Update Interval: 60.0s
[12:08:18][C][adc:028]: ADC Sensor 'Prefilter'
[12:08:18][C][adc:028]: Device Class: 'voltage'
[12:08:18][C][adc:028]: Unit of Measurement: 'V'
[12:08:18][C][adc:028]: Accuracy Decimals: 2
[12:08:18][C][adc:037]: Pin: 34
[12:08:18][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:08:18][C][adc:053]: Update Interval: 60.0s
[12:08:18][C][adc:028]: ADC Sensor 'Postfilter'
[12:08:18][C][adc:028]: Device Class: 'voltage'
[12:08:18][C][adc:028]: Unit of Measurement: 'V'
[12:08:18][C][adc:028]: Accuracy Decimals: 2
[12:08:18][C][adc:037]: Pin: 35
[12:08:18][C][adc:046]: Attenuation: 6db (max 2.2V)
[12:08:18][C][adc:053]: Update Interval: 60.0s
[12:08:18][C][dht:017]: DHT:
[12:08:18][C][dht:018]: Pin: GPIO5 (Mode: INPUT)
[12:08:18][C][dht:024]: Model: DHT22 (or equivalent)
[12:08:18][C][dht:027]: Update Interval: 60.0s
[12:08:18][C][dht:029]: Temperature 'Basement Temperature'
[12:08:18][C][dht:029]: Device Class: 'temperature'
[12:08:18][C][dht:029]: Unit of Measurement: '°C'
[12:08:18][C][dht:029]: Accuracy Decimals: 1
[12:08:18][C][dht:030]: Humidity 'Basement Humidity'
[12:08:18][C][dht:030]: Device Class: 'humidity'
[12:08:18][C][dht:030]: Unit of Measurement: '%'
[12:08:18][C][dht:030]: Accuracy Decimals: 0
[12:08:18][C][pulse_counter:147]: Pulse Counter 'Cold Water Flow'
[12:08:18][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:08:18][C][pulse_counter:147]: Accuracy Decimals: 2
[12:08:19][C][pulse_counter:147]: Icon: 'mdi:water'
[12:08:19][C][pulse_counter:148]: Pin: GPIO18 (Mode: INPUT)
[12:08:19][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:08:19][C][pulse_counter:150]: Falling Edge: DISABLE
[12:08:19][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:08:19][C][pulse_counter:152]: Update Interval: 60.0s
[12:08:19][C][pulse_counter:147]: Pulse Counter 'Hot Water Flow'
[12:08:19][C][pulse_counter:147]: Unit of Measurement: 'GPM'
[12:08:19][C][pulse_counter:147]: Accuracy Decimals: 2
[12:08:19][C][pulse_counter:147]: Icon: 'mdi:water'
[12:08:19][C][pulse_counter:148]: Pin: GPIO19 (Mode: INPUT)
[12:08:19][C][pulse_counter:149]: Rising Edge: INCREMENT
[12:08:19][C][pulse_counter:150]: Falling Edge: DISABLE
[12:08:19][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:08:19][C][pulse_counter:152]: Update Interval: 60.0s
[12:08:19][C][pulse_counter:147]: Pulse Counter 'Water Heater Status'
[12:08:19][C][pulse_counter:147]: Unit of Measurement: 'pulses/min'
[12:08:19][C][pulse_counter:147]: Accuracy Decimals: 2
[12:08:19][C][pulse_counter:147]: Icon: 'mdi:pulse'
[12:08:19][C][pulse_counter:148]: Pin: GPIO14 (Mode: INPUT_PULLDOWN)
[12:08:19][C][pulse_counter:149]: Rising Edge: DISABLE
[12:08:19][C][pulse_counter:150]: Falling Edge: INCREMENT
[12:08:19][C][pulse_counter:151]: Filtering pulses shorter than 13 µs
[12:08:19][C][pulse_counter:152]: Update Interval: 60.0s
[12:08:19][C][homeassistant.time:010]: Home Assistant Time:
[12:08:19][C][homeassistant.time:011]: Timezone: 'EST5EDT4,M3.2.0/2,M11.1.0/2'
[12:08:19][C][captive_portal:169]: Captive Portal:
[12:08:19][C][ota:029]: Over-The-Air Updates:
[12:08:19][C][ota:030]: Address: 618_blueshutters_basement.local:3232
[12:08:19][C][ota:032]: Using Password.
[12:08:19][C][api:095]: API Server:
[12:08:19][C][api:096]: Address: 618_blueshutters_basement.local:6053
[12:08:21][D][api.connection:617]: Client 'Home Assistant 2021.6.6 (172.16.1.18)' connected successfully!
[12:08:21][D][time:040]: Synchronized time: Thu Jun 24 12:08:21 2021
[12:08:49][D][dht:048]: Got Temperature=18.7°C Humidity=69.8%
[12:08:49][D][sensor:099]: 'Basement Temperature': Sending state 18.70000 °C with 1 decimals of accuracy
[12:08:49][D][sensor:099]: 'Basement Humidity': Sending state 69.80000 % with 0 decimals of accuracy
[12:08:50][D][adc:058]: 'cold_sensor': Got voltage=0.35V
[12:08:50][D][sensor:099]: 'cold_sensor': Sending state 0.35350 V with 2 decimals of accuracy
[12:08:50][D][resistance:037]: 'Cold_Water_Temp' - Resistance 83351.0Ω
[12:08:50][D][sensor:099]: 'Cold_Water_Temp': Sending state 83351.04688 Ω with 1 decimals of accuracy
[12:08:50][D][ntc:026]: 'Cold Water Temperature' - Temperature: 14.4°C
[12:08:50][D][sensor:099]: 'Cold Water Temperature': Sending state 14.38544 °C with 1 decimals of accuracy
[12:09:00][D][adc:058]: 'Postfilter': Got voltage=0.07V
[12:09:00][D][sensor:099]: 'Postfilter': Sending state 0.06930 V with 2 decimals of accuracy
[12:09:01][D][adc:058]: 'hot_sensor': Got voltage=0.68V
[12:09:01][D][sensor:099]: 'hot_sensor': Sending state 0.67961 V with 2 decimals of accuracy
[12:09:01][D][resistance:037]: 'Hot_Water_Temp' - Resistance 38557.3Ω
[12:09:01][D][sensor:099]: 'Hot_Water_Temp': Sending state 38557.30859 Ω with 1 decimals of accuracy
[12:09:01][D][ntc:026]: 'Hot Water Temperature' - Temperature: 30.7°C
[12:09:01][D][sensor:099]: 'Hot Water Temperature': Sending state 30.65219 °C with 1 decimals of accuracy
[12:09:07][D][pulse_counter:159]: 'Cold Water Flow': Retrieved counter: 0.00 pulses/min
[12:09:07][D][sensor:099]: 'Cold Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:09:10][D][pulse_counter:159]: 'Water Heater Status': Retrieved counter: 144.00 pulses/min
[12:09:11][D][adc:058]: 'Prefilter': Got voltage=0.21V
[12:09:11][D][sensor:099]: 'Prefilter': Sending state 0.20576 V with 2 decimals of accuracy
[12:09:11][D][pulse_counter:159]: 'Hot Water Flow': Retrieved counter: 0.00 pulses/min
[12:09:11][D][sensor:099]: 'Hot Water Flow': Sending state 0.00000 GPM with 2 decimals of accuracy
[12:09:12][D][sensor:099]: 'Water Heater Status': Sending state 144.00000 pulses/min with 2 decimals of accuracy
The text was updated successfully, but these errors were encountered: