We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
I am having an issue with a DHT22 sensor.
I have 4.7kΩ resistor between the 3.3v and the data but am still getting the error below.
[09:28:14][W][dht:110]: Rising edge for bit 0 failed! [09:28:14][W][dht:060]: Invalid readings! Please check your wiring (pull-up resistor, pin number).
Any help would be appreciated.
The text was updated successfully, but these errors were encountered:
#430
Sorry, something went wrong.
No branches or pull requests
I am having an issue with a DHT22 sensor.
I have 4.7kΩ resistor between the 3.3v and the data but am still getting the error below.
[09:28:14][W][dht:110]: Rising edge for bit 0 failed!
[09:28:14][W][dht:060]: Invalid readings! Please check your wiring (pull-up resistor, pin number).
Any help would be appreciated.
The text was updated successfully, but these errors were encountered: