Skip to content

Latest commit

 

History

History
82 lines (52 loc) · 2.96 KB

BUILDING.md

File metadata and controls

82 lines (52 loc) · 2.96 KB
Raw

Build instructions

For the kernel

Crystal toolchain

You must get the dependencies for building Crystal listed on the project's wiki:

  • LLVM 9.0 (recommended, but any version later than 7.0 will probably do).
  • Latest pre-built version of Crystal (v0.32.1). You have to install it in /usr/bin
  • libbsd
  • libedit
  • libevent
  • libgmp
  • libgc
  • libxml2
  • libyaml
  • pcre3
  • openssl

lilith needs to be compiled with a patched Crystal compiler, to build it, run the command:

make toolchain/crystal/.build/crystal

The Makefile will clone the patched toolchain into the toolchain/crystal directory and build it for you.

NOTE: If anything goes wrong, make sure to cd toolchain/crystal && make clean && rm -rf ~/.cache/crystal so that the patched Crystal is not littered with your past failed build artifacts.

Cross-Binutils

You will also need an appropriate x86_64-elf Binutils toolchain in order to link and assemble the kernel, as well as i686-elf binutils to build the bootstrap code.

You can build the i686-elf and x86_64-elf toolchain by:

  • Downloading and compiling binutils in a build directory for the x86_64-elf target (recommend build instructions by phill-opp)
  • In another build directory, compile binutils for the i686-elf target.
  • Install it in somewhere convenient like in a ~/binutils folder, make sure you set the $PATH variable too!

Building the kernel!

Now that you have everything set up, it's time to build the kernel! In the parent project directory, run:

make build/kernel RELEASE=1

NOTE: Only release builds work right now (until #12 is fixed)

For the userspace

Toolchain

A Makefile is provided for building the userspace toolchain, to build it, go to the userspace/toolchain directory and use make. The build system compiles the userspace toolchain for x86_64-elf-lilith by default.

Once built, a patched version of GCC/Binutils will be installed in userspace/toolchain/tools/bin, simply set your PATH variable to that location (or use the source ./env.sh script) and you can use the toolchain (with the i386-elf-lilith or x86_64-elf-lilith prefix).

Building packages

Lilith currently only has FAT16 driver so the easiest way to debug it is with a hard drive image. Build the 50MB MBR-formatted disk.img file by doing:

make disk.img

(You must have dd, losetup, mkfs.fat, grub-install commands installed)

After building the toolchain, set the necessary environment variables by doing:

source ./env.sh

You'll have to build libc first before building any other packages:

./pkgs/missio build libc

You can now build packages by using the missio package manager.