Skip to content
This repository has been archived by the owner on Jan 20, 2024. It is now read-only.

fatal error: jpeglib.h: No such file or directory #6

Open
junhuanchen opened this issue Feb 23, 2021 · 2 comments
Open

fatal error: jpeglib.h: No such file or directory #6

junhuanchen opened this issue Feb 23, 2021 · 2 comments

Comments

@junhuanchen
Copy link
Contributor

junhuanchen commented Feb 23, 2021 •
edited

fatal error: jpeglib.h: No such file or directory
#include <jpeglib.h>
^
compilation terminated.

解决：安装 jpeg库
sudo apt-get install libjpeg-dev
@thepian
Copy link

thepian commented May 16, 2021 •
edited

This seems similar

pip install maixpy3

Collecting maixpy3
  Using cached MaixPy3-0.3.0.tar.gz (10.0 MB)
Requirement already satisfied: numpy in /opt/conda/lib/python3.7/site-packages (from maixpy3) (1.20.3)
Collecting opencv-python==4.1.2.30
  Using cached opencv_python-4.1.2.30-cp37-cp37m-manylinux1_x86_64.whl (28.3 MB)
Collecting opencv-contrib-python==4.1.2.30
  Using cached opencv_contrib_python-4.1.2.30-cp37-cp37m-manylinux1_x86_64.whl (34.3 MB)
Collecting Pillow
  Using cached Pillow-8.2.0-cp37-cp37m-manylinux1_x86_64.whl (3.0 MB)
Collecting rpyc
  Using cached rpyc-5.0.1-py3-none-any.whl (68 kB)
Collecting gpiod
  Using cached gpiod-1.5.0-py3-none-any.whl
Requirement already satisfied: evdev in /opt/conda/lib/python3.7/site-packages (from maixpy3) (1.4.0)
Requirement already satisfied: spidev in /opt/conda/lib/python3.7/site-packages (from maixpy3) (3.5)
Collecting pyserial
  Using cached pyserial-3.5-py2.py3-none-any.whl (90 kB)
Requirement already satisfied: plumbum in /opt/conda/lib/python3.7/site-packages (from rpyc->maixpy3) (1.7.0)
Building wheels for collected packages: maixpy3
  Building wheel for maixpy3 (setup.py) ... error
  ERROR: Command errored out with exit status 1:
   command: /opt/conda/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"'; __file__='"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-klp_vr0l
       cwd: /tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/
  Complete output (63 lines):
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.7
  creating build/lib.linux-x86_64-3.7/maix
  copying maix/nn.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/pwm.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/camera.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/display.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/__init__.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/rpycs.py -> build/lib.linux-x86_64-3.7/maix
  copying maix/video.py -> build/lib.linux-x86_64-3.7/maix
  creating build/lib.linux-x86_64-3.7/maix/utils
  copying maix/utils/rtp_packet.py -> build/lib.linux-x86_64-3.7/maix/utils
  copying maix/utils/rtsp_packet.py -> build/lib.linux-x86_64-3.7/maix/utils
  copying maix/utils/video_stream.py -> build/lib.linux-x86_64-3.7/maix/utils
  copying maix/utils/__init__.py -> build/lib.linux-x86_64-3.7/maix/utils
  running egg_info
  writing MaixPy3.egg-info/PKG-INFO
  writing dependency_links to MaixPy3.egg-info/dependency_links.txt
  writing entry points to MaixPy3.egg-info/entry_points.txt
  writing requirements to MaixPy3.egg-info/requires.txt
  writing top-level names to MaixPy3.egg-info/top_level.txt
  reading manifest file 'MaixPy3.egg-info/SOURCES.txt'
  writing manifest file 'MaixPy3.egg-info/SOURCES.txt'
  warning: build_py: byte-compiling is disabled, skipping.
  
  running build_ext
  building 'pylibi2c' extension
  creating build/temp.linux-x86_64-3.7
  creating build/temp.linux-x86_64-3.7/ext_modules
  creating build/temp.linux-x86_64-3.7/ext_modules/libi2c
  creating build/temp.linux-x86_64-3.7/ext_modules/libi2c/src
  gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/libi2c/src -I/opt/conda/include/python3.7m -c ext_modules/libi2c/src/pyi2c.c -o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/pyi2c.o
  ext_modules/libi2c/src/pyi2c.c: In function 'i2c_read_device':
  ext_modules/libi2c/src/pyi2c.c:165:16: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
    165 |     if (result != len) {
        |                ^~
  In function 'check_user_input',
      inlined from 'I2CDevice_set_page_bytes' at ext_modules/libi2c/src/pyi2c.c:372:9:
  ext_modules/libi2c/src/pyi2c.c:255:9: warning: '__builtin_memcmp_eq' reading 10 bytes from a region of size 7 [-Wstringop-overflow=]
    255 |     if (memcmp(name, "tenbit", strlen(name)) == 0) {
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'check_user_input',
      inlined from 'I2CDevice_set_iaddr_bytes' at ext_modules/libi2c/src/pyi2c.c:405:9:
  ext_modules/libi2c/src/pyi2c.c:255:9: warning: '__builtin_memcmp_eq' reading 11 bytes from a region of size 7 [-Wstringop-overflow=]
    255 |     if (memcmp(name, "tenbit", strlen(name)) == 0) {
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/libi2c/src -I/opt/conda/include/python3.7m -c ext_modules/libi2c/src/i2c.c -o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/i2c.o
  ext_modules/libi2c/src/i2c.c: In function 'i2c_write':
  ext_modules/libi2c/src/i2c.c:288:69: warning: comparison of integer expressions of different signedness: 'ssize_t' {aka 'long int'} and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
    288 |         if (write(device->bus, tmp_buf, device->iaddr_bytes + size) != device->iaddr_bytes + size) {
        |                                                                     ^~
  gcc -pthread -shared -B /opt/conda/compiler_compat -L/opt/conda/lib -Wl,-rpath=/opt/conda/lib -Wl,--no-as-needed -Wl,--sysroot=/ build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/pyi2c.o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/i2c.o -o build/lib.linux-x86_64-3.7/pylibi2c.cpython-37m-x86_64-linux-gnu.so
  building '_maix' extension
  creating build/temp.linux-x86_64-3.7/ext_modules/_maix
  gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/_maix/include -I/opt/conda/include/python3.7m -c ext_modules/_maix/_maix.c -o build/temp.linux-x86_64-3.7/ext_modules/_maix/_maix.o
  ext_modules/_maix/_maix.c:7:10: fatal error: jpeglib.h: No such file or directory
      7 | #include "jpeglib.h"
        |          ^~~~~~~~~~~
  compilation terminated.
  error: command 'gcc' failed with exit status 1
  ----------------------------------------
  ERROR: Failed building wheel for maixpy3
  Running setup.py clean for maixpy3
Failed to build maixpy3
Installing collected packages: rpyc, pyserial, Pillow, opencv-python, opencv-contrib-python, gpiod, maixpy3
    Running setup.py install for maixpy3 ... error
    ERROR: Command errored out with exit status 1:
     command: /opt/conda/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"'; __file__='"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-nk66supv/install-record.txt --single-version-externally-managed --compile --install-headers /opt/conda/include/python3.7m/maixpy3
         cwd: /tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/
    Complete output (63 lines):
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-3.7
    creating build/lib.linux-x86_64-3.7/maix
    copying maix/nn.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/pwm.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/camera.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/display.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/__init__.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/rpycs.py -> build/lib.linux-x86_64-3.7/maix
    copying maix/video.py -> build/lib.linux-x86_64-3.7/maix
    creating build/lib.linux-x86_64-3.7/maix/utils
    copying maix/utils/rtp_packet.py -> build/lib.linux-x86_64-3.7/maix/utils
    copying maix/utils/rtsp_packet.py -> build/lib.linux-x86_64-3.7/maix/utils
    copying maix/utils/video_stream.py -> build/lib.linux-x86_64-3.7/maix/utils
    copying maix/utils/__init__.py -> build/lib.linux-x86_64-3.7/maix/utils
    running egg_info
    writing MaixPy3.egg-info/PKG-INFO
    writing dependency_links to MaixPy3.egg-info/dependency_links.txt
    writing entry points to MaixPy3.egg-info/entry_points.txt
    writing requirements to MaixPy3.egg-info/requires.txt
    writing top-level names to MaixPy3.egg-info/top_level.txt
    reading manifest file 'MaixPy3.egg-info/SOURCES.txt'
    writing manifest file 'MaixPy3.egg-info/SOURCES.txt'
    warning: build_py: byte-compiling is disabled, skipping.
    
    running build_ext
    building 'pylibi2c' extension
    creating build/temp.linux-x86_64-3.7
    creating build/temp.linux-x86_64-3.7/ext_modules
    creating build/temp.linux-x86_64-3.7/ext_modules/libi2c
    creating build/temp.linux-x86_64-3.7/ext_modules/libi2c/src
    gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/libi2c/src -I/opt/conda/include/python3.7m -c ext_modules/libi2c/src/pyi2c.c -o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/pyi2c.o
    ext_modules/libi2c/src/pyi2c.c: In function 'i2c_read_device':
    ext_modules/libi2c/src/pyi2c.c:165:16: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
      165 |     if (result != len) {
          |                ^~
    In function 'check_user_input',
        inlined from 'I2CDevice_set_page_bytes' at ext_modules/libi2c/src/pyi2c.c:372:9:
    ext_modules/libi2c/src/pyi2c.c:255:9: warning: '__builtin_memcmp_eq' reading 10 bytes from a region of size 7 [-Wstringop-overflow=]
      255 |     if (memcmp(name, "tenbit", strlen(name)) == 0) {
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In function 'check_user_input',
        inlined from 'I2CDevice_set_iaddr_bytes' at ext_modules/libi2c/src/pyi2c.c:405:9:
    ext_modules/libi2c/src/pyi2c.c:255:9: warning: '__builtin_memcmp_eq' reading 11 bytes from a region of size 7 [-Wstringop-overflow=]
      255 |     if (memcmp(name, "tenbit", strlen(name)) == 0) {
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/libi2c/src -I/opt/conda/include/python3.7m -c ext_modules/libi2c/src/i2c.c -o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/i2c.o
    ext_modules/libi2c/src/i2c.c: In function 'i2c_write':
    ext_modules/libi2c/src/i2c.c:288:69: warning: comparison of integer expressions of different signedness: 'ssize_t' {aka 'long int'} and 'size_t' {aka 'long unsigned int'} [-Wsign-compare]
      288 |         if (write(device->bus, tmp_buf, device->iaddr_bytes + size) != device->iaddr_bytes + size) {
          |                                                                     ^~
    gcc -pthread -shared -B /opt/conda/compiler_compat -L/opt/conda/lib -Wl,-rpath=/opt/conda/lib -Wl,--no-as-needed -Wl,--sysroot=/ build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/pyi2c.o build/temp.linux-x86_64-3.7/ext_modules/libi2c/src/i2c.o -o build/lib.linux-x86_64-3.7/pylibi2c.cpython-37m-x86_64-linux-gnu.so
    building '_maix' extension
    creating build/temp.linux-x86_64-3.7/ext_modules/_maix
    gcc -pthread -B /opt/conda/compiler_compat -Wl,--sysroot=/ -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -Iext_modules/_maix/include -I/opt/conda/include/python3.7m -c ext_modules/_maix/_maix.c -o build/temp.linux-x86_64-3.7/ext_modules/_maix/_maix.o
    ext_modules/_maix/_maix.c:7:10: fatal error: jpeglib.h: No such file or directory
        7 | #include "jpeglib.h"
          |          ^~~~~~~~~~~
    compilation terminated.
    error: command 'gcc' failed with exit status 1
    ----------------------------------------
ERROR: Command errored out with exit status 1: /opt/conda/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"'; __file__='"'"'/tmp/pip-install-egb7rmm0/maixpy3_ec596bb36973466b856a2e844aba7ee5/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-nk66supv/install-record.txt --single-version-externally-managed --compile --install-headers /opt/conda/include/python3.7m/maixpy3 Check the logs for full command output.

@thepian
Copy link

thepian commented May 17, 2021

On Alpine I fixed this by adding package "libjpeg-turbo-dev" on Ubuntu it might be called "libjpeg-dev".

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@thepian @junhuanchen