Latest release 20230214 does not accept configuration

[devparadigma]

When you start the server with the path to the config, it starts with a standard configuration!
/usr/bin/kcp-server /usr/bin/kcp-server -c /etc/kcptun/config.json

Config
{
"listen": ":161",
"target": "192.168.100.104:3389",
"key": "XXXXXXXXXXXXX",
"crypt": "salsa20",
"mode": "fast2",
"dscp": 46
}

[szhangcn]

read carefully to the useage, there is no listen and target options in kcptun config. you should use localaddr and remoteaddr

GLOBAL OPTIONS:
--localaddr value, -l value local listen address (default: ":12948")
--remoteaddr value, -r value kcp server address, eg: "IP:29900" a for single port, "IP:minport-maxport" for port range (default: "vps:29900")
--key value pre-shared secret between client and server (default: "it's a secrect") [$KCPTUN_KEY]
--crypt value aes, aes-128, aes-192, salsa20, blowfish, twofish, cast5, 3des, tea, xtea, xor, sm4, none (default: "aes")
--mode value profiles: fast3, fast2, fast, normal, manual (default: "fast")
--conn value set num of UDP connections to server (default: 1)
--autoexpire value set auto expiration time(in seconds) for a single UDP connection, 0 to disable (default: 0)
--scavengettl value set how long an expired connection can live (in seconds) (default: 600)
--mtu value set maximum transmission unit for UDP packets (default: 1350)
--sndwnd value set send window size(num of packets) (default: 128)
--rcvwnd value set receive window size(num of packets) (default: 512)
--datashard value, --ds value set reed-solomon erasure coding - datashard (default: 10)
--parityshard value, --ps value set reed-solomon erasure coding - parityshard (default: 3)
--dscp value set DSCP(6bit) (default: 0)
--nocomp disable compression
--sockbuf value per-socket buffer in bytes (default: 4194304)
--smuxver value specify smux version, available 1,2 (default: 1)
--smuxbuf value the overall de-mux buffer in bytes (default: 4194304)
--streambuf value per stream receive buffer in bytes, smux v2+ (default: 2097152)
--keepalive value seconds between heartbeats (default: 10)
--snmplog value collect snmp to file, aware of timeformat in golang, like: ./snmp-20060102.log
--snmpperiod value snmp collect period, in seconds (default: 60)
--log value specify a log file to output, default goes to stderr
--quiet to suppress the 'stream open/close' messages
--tcp to emulate a TCP connection(linux)
-c value config from json file, which will override the command from shell
--help, -h show help
--version, -v print the version