Skip to content

Exposure/imageproxy

 
 

Repository files navigation

imageproxy Build Status GoDoc Apache 2.0 License

imageproxy is a caching image proxy server written in go. It features:

  • basic image adjustments like resizing, cropping, and rotation
  • access control using host whitelists or request signing (HMAC-SHA256)
  • support for jpeg, png, and gif image formats (including animated gifs)
  • on-disk caching, respecting the cache headers of the original images
  • easy deployment, since it's pure go

Personally, I use it primarily to dynamically resize images hosted on my own site (read more in this post). But you can also enable request signing and use it as an SSL proxy for remote images, similar to atmos/camo but with additional image adjustment options.

URL Structure

imageproxy URLs are of the form http://localhost/{options}/{remote_url}.

Options

Options are specified as a comma delimited list of parameters, which can be supplied in any order. Duplicate parameters overwrite previous values.

The format is a superset of resize.ly's options.

Size

The size option takes the general form {width}x{height}, where width and height are numbers. Integer values greater than 1 are interpreted as exact pixel values. Floats between 0 and 1 are interpreted as percentages of the original image size. If either value is omitted or set to 0, it will be automatically set to preserve the aspect ratio based on the other dimension. If a single number is provided (with no "x" separator), it will be used for both height and width.

Crop Mode

Depending on the options specified, an image may be cropped to fit the requested size. In all cases, the original aspect ratio of the image will be preserved; imageproxy will never stretch the original image.

When no explicit crop mode is specified, the following rules are followed:

  • If both width and height values are specified, the image will be scaled to fill the space, cropping if necessary to fit the exact dimension.

  • If only one of the width or height values is specified, the image will be resized to fit the specified dimension, scaling the other dimension as needed to maintain the aspect ratio.

If the fit option is specified together with a width and height value, the image will be resized to fit within a containing box of the specified size. As always, the original aspect ratio will be preserved. Specifying the fit option with only one of either width or height does the same thing as if fit had not been specified.

Rotate

The r{degrees} option will rotate the image the specified number of degrees, counter-clockwise. Valid degrees values are 90, 180, and 270. Images are rotated after being resized.

Flip

The fv option will flip the image vertically. The fh option will flip the image horizontally. Images are flipped after being resized and rotated.

Quality

The q{percentage} option can be used to specify the output quality (JPEG only). If not specified, the default value of 95 is used.

Signature

The s{signature} option specifies an optional base64 encoded HMAC used to sign the remote URL in the request. The HMAC key used to verify signatures is provided to the imageproxy server on startup.

See URL Signing for examples of generating signatures.

Remote URL

The URL of the original image to load is specified as the remainder of the path, without any encoding. For example, http://localhost/200/https://willnorris.com/logo.jpg.

In order to optimize caching, it is recommended that URLs not contain query strings.

Examples

The following live examples demonstrate setting different options on this source image, which measures 1024 by 678 pixels.

Options Meaning Image
200x 200px wide, proportional height 200x
0.15x 15% original width, proportional height 0.15x
x100 100px tall, proportional width x100
100x150 100 by 150 pixels, cropping as needed 100x150
100 100px square, cropping as needed 100
150,fit scale to fit 150px square, no cropping 150,fit
100,r90 100px square, rotated 90 degrees 100,r90
100,fv,fh 100px square, flipped horizontal and vertical 100,fv,fh
200x,q60 200px wide, proportional height, 60% quality 200x,q60

Transformation also works on animated gifs. Here is this source image resized to 200px square and rotated 270 degrees:

200,r270

Getting Started

Install the package using:

go get willnorris.com/go/imageproxy/cmd/imageproxy

(Note that go1.2 and earlier may have trouble fetching the package with go get).

Once installed, ensure $GOPATH/bin is in your $PATH, then run the proxy using:

imageproxy

This will start the proxy on port 8080, without any caching and with no host whitelist (meaning any remote URL can be proxied). Test this by navigating to http://localhost:8080/500/https://octodex.github.com/images/codercat.jpg and you should see a 500px square coder octocat.

Cache

By default, the imageproxy command does not cache responses, but caching can be enabled using the -cache flag. It supports the following values:

  • memory - uses an in-memory cache. (This can exhaust your system's available memory and is not recommended for production systems)
  • directory on local disk (e.g. /tmp/imageproxy) - will cache images on disk
  • s3 URL (e.g. s3://s3-us-west-2.amazonaws.com/my-bucket) - will cache images on Amazon S3. This requires either an IAM role and instance profile with access to your your bucket or AWS_ACCESS_KEY_ID and AWS_SECRET_KEY environmental parameters set.

For example, to cache files on disk in the /tmp/imageproxy directory:

imageproxy -cache /tmp/imageproxy

Reload the codercat URL, and then inspect the contents of /tmp/imageproxy. Within the subdirectories, there should be two files, one for the original full-size codercat image, and one for the resized 500px version.

Referrer Whitelist

You can limit images to only be accessible for certain hosts in the HTTP referrer header, which can help prevent others from hotlinking to images. It can be enabled by running:

imageproxy  -referrers example.com

Reload the codercat URL, and you should now get an error message. You can specify multiple hosts as a comma separated list, or prefix a host value with *. to allow all sub-domains as well.

Host whitelist

You can limit the remote hosts that the proxy will fetch images from using the whitelist flag. This is useful, for example, for locking the proxy down to your own hosts to prevent others from abusing it. Of course if you want to support fetching from any host, leave off the whitelist flag. Try it out by running:

imageproxy -whitelist example.com

Reload the codercat URL, and you should now get an error message. You can specify multiple hosts as a comma separated list, or prefix a host value with *. to allow all sub-domains as well.

Signed Requests

Instead of a host whitelist, you can require that requests be signed. This is useful in preventing abuse when you don't have just a static list of hosts you want to allow. Signatures are generated using HMAC-SHA256 against the remote URL, and url-safe base64 encoding the result:

base64urlencode(hmac.New(sha256, <key>).digest(<remote_url>))

The HMAC key is specified using the signatureKey flag. If this flag begins with an "@", the remainder of the value is interpreted as a file on disk which contains the HMAC key.

Try it out by running:

imageproxy -signatureKey "secret key"

Reload the codercat URL, and you should see an error message. Now load a signed codercat URL and verify that it loads properly.

Some simple code samples for generating signatures in various languages can be found in URL Signing.

If both a whiltelist and signatureKey are specified, requests can match either. In other words, requests that match one of the whitelisted hosts don't necessarily need to be signed, though they can be.

Run imageproxy -help for a complete list of flags the command accepts. If you want to use a different caching implementation, it's probably easiest to just make a copy of cmd/imageproxy/main.go and customize it to fit your needs... it's a very simple command.

Default Base URL

Typically, remote images to be proxied are specified as absolute URLs. However, if you commonly proxy images from a single source, you can provide a base URL and then specify remote images relative to that base. Try it out by running:

imageproxy -baseURL https://octodex.github.com/

Then load the codercat image, specified as a URL relative to that base: http://localhost:8080/500/images/codercat.jpg. Note that this is not an effective method to mask the true source of the images being proxied; it is trivial to discover the base URL being used. Even when a base URL is specified, you can always provide the absolute URL of the image to be proxied.

Scaling beyond original size

By default, the imageproxy won't scale images beyond their original size. However, you can use the scaleUp command-line flag to allow this to happen:

imageproxy -scaleUp true

Deploying

You can build and deploy imageproxy using any standard go toolchain, but here's how I do it.

I use goxc to build and deploy to an Ubuntu server. I have a $GOPATH/willnorris.com/go/imageproxy/.goxc.local.json file which limits builds to 64-bit linux:

 {
   "ConfigVersion": "0.9",
   "BuildConstraints": "linux,amd64"
 }

I then run goxc which compiles the static binary and creates a deb package at build/0.2.1/imageproxy_0.2.1_amd64.deb (or whatever the current version is). I copy this file to my server and install it using sudo dpkg -i imageproxy_0.2.1_amd64.deb, which is installed to /usr/bin/imageproxy.

Ubuntu uses upstart to manage services, so I copy etc/imageproxy.conf to /etc/init/imageproxy.conf on my server and start it using sudo service imageproxy start. You will certainly want to modify that upstart script to suit your desired configuration.

Deploying to Heroku

It's easy to vendorize the dependencies with Godep and deploy to Heroku. Take a look at this GitHub repo

Docker

A docker image is available at willnorris/imageproxy.

You can run it by

docker run -p 8080:8080 willnorris/imageproxy -addr 0.0.0.0:8080

License

imageproxy is copyright Google, but is not an official Google product. It is available under the Apache 2.0 License.

Packages

No packages published

Languages

  • Go 96.5%
  • Shell 3.5%