Merge tag 'v5.9.12' into ASUS-N580GD

This is the 5.9.12 stable release

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 9
-SUBLEVEL = 11
+SUBLEVEL = 12
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arc/include/asm/pgtable.h

@@ -134,8 +134,10 @@
 
 #ifdef CONFIG_ARC_HAS_PAE40
 #define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #else
 #define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /**************************************************************************

arch/arm/boot/dts/dra76x.dtsi

@@ -32,8 +32,8 @@
 				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "int0", "int1";
-				clocks = <&mcan_clk>, <&l3_iclk_div>;
-				clock-names = "cclk", "hclk";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
 				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
 			};
 		};

arch/arm/include/asm/pgtable-2level.h

@@ -75,6 +75,8 @@
 #define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map

arch/arm/include/asm/pgtable-3level.h

@@ -25,6 +25,8 @@
 #define PTE_HWTABLE_OFF		(0)
 #define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u64))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
+
 /*
  * PGDIR_SHIFT determines the size a top-level page table entry can map.
  */

arch/arm/mach-omap2/cpuidle44xx.c

@@ -175,16 +175,18 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		if (mpuss_can_lose_context) {
 			error = cpu_cluster_pm_enter();
 			if (error) {
-				omap_set_pwrdm_state(mpu_pd, PWRDM_POWER_ON);
-				goto cpu_cluster_pm_out;
+				index = 0;
+				cx = state_ptr + index;
+				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
+				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				mpuss_can_lose_context = 0;
 			}
 		}
 	}
 
 	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
 	cpu_done[dev->cpu] = true;
 
-cpu_cluster_pm_out:
 	/* Wakeup CPU1 only if it is not offlined */
 	if (dev->cpu == 0 && cpumask_test_cpu(1, cpu_online_mask)) {
 

arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi

@@ -54,7 +54,7 @@
 			status = "okay";
 		};
 
-		serial@c280000 {
+		serial@3100000 {
 			status = "okay";
 		};
 

arch/arm64/boot/dts/nvidia/tegra194.dtsi

@@ -924,7 +924,7 @@
 
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
-			reg = <0x0c150000 0xa0000>;
+			reg = <0x0c150000 0x90000>;
 			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 			             <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi

@@ -1663,16 +1663,6 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb_vbus_otg: regulator@11 {
-		compatible = "regulator-fixed";
-		regulator-name = "USB_VBUS_EN0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
 	vdd_hdmi: regulator@10 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_HDMI_5V0";
@@ -1712,4 +1702,14 @@
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 	};
+
+	vdd_usb_vbus_otg: regulator@14 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 };

arch/arm64/include/asm/pgtable.h

@@ -108,18 +108,19 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
 #define pte_valid_not_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
-#define pte_valid_young(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
 #define pte_valid_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 
 /*
  * Could the pte be present in the TLB? We must check mm_tlb_flush_pending
  * so that we don't erroneously return false for pages that have been
  * remapped as PROT_NONE but are yet to be flushed from the TLB.
+ * Note that we can't make any assumptions based on the state of the access
+ * flag, since ptep_clear_flush_young() elides a DSB when invalidating the
+ * TLB.
  */
 #define pte_accessible(mm, pte)	\
-	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))
+	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
 
 /*
  * p??_access_permitted() is true for valid user mappings (subject to the
@@ -145,13 +146,6 @@ static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot)
 	return pte;
 }
 
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
-	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
-	return pte;
-}
-
 static inline pte_t pte_mkwrite(pte_t pte)
 {
 	pte = set_pte_bit(pte, __pgprot(PTE_WRITE));
@@ -177,6 +171,20 @@ static inline pte_t pte_mkdirty(pte_t pte)
 	return pte;
 }
 
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	/*
+	 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
+	 * clear), set the PTE_DIRTY bit.
+	 */
+	if (pte_hw_dirty(pte))
+		pte = pte_mkdirty(pte);
+
+	pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
+	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+	return pte;
+}
+
 static inline pte_t pte_mkold(pte_t pte)
 {
 	return clear_pte_bit(pte, __pgprot(PTE_AF));
@@ -798,12 +806,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
 	pte = READ_ONCE(*ptep);
 	do {
 		old_pte = pte;
-		/*
-		 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
-		 * clear), set the PTE_DIRTY bit.
-		 */
-		if (pte_hw_dirty(pte))
-			pte = pte_mkdirty(pte);
 		pte = pte_wrprotect(pte);
 		pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
 					       pte_val(old_pte), pte_val(pte));

arch/arm64/kvm/vgic/vgic-mmio-v3.c

@@ -273,6 +273,23 @@ static unsigned long vgic_mmio_read_v3r_typer(struct kvm_vcpu *vcpu,
 	return extract_bytes(value, addr & 7, len);
 }
 
+static unsigned long vgic_uaccess_read_v3r_typer(struct kvm_vcpu *vcpu,
+						 gpa_t addr, unsigned int len)
+{
+	unsigned long mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+	int target_vcpu_id = vcpu->vcpu_id;
+	u64 value;
+
+	value = (u64)(mpidr & GENMASK(23, 0)) << 32;
+	value |= ((target_vcpu_id & 0xffff) << 8);
+
+	if (vgic_has_its(vcpu->kvm))
+		value |= GICR_TYPER_PLPIS;
+
+	/* reporting of the Last bit is not supported for userspace */
+	return extract_bytes(value, addr & 7, len);
+}
+
 static unsigned long vgic_mmio_read_v3r_iidr(struct kvm_vcpu *vcpu,
 					     gpa_t addr, unsigned int len)
 {
@@ -593,8 +610,9 @@ static const struct vgic_register_region vgic_v3_rd_registers[] = {
 	REGISTER_DESC_WITH_LENGTH(GICR_IIDR,
 		vgic_mmio_read_v3r_iidr, vgic_mmio_write_wi, 4,
 		VGIC_ACCESS_32bit),
-	REGISTER_DESC_WITH_LENGTH(GICR_TYPER,
-		vgic_mmio_read_v3r_typer, vgic_mmio_write_wi, 8,
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GICR_TYPER,
+		vgic_mmio_read_v3r_typer, vgic_mmio_write_wi,
+		vgic_uaccess_read_v3r_typer, vgic_mmio_uaccess_write_wi, 8,
 		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
 	REGISTER_DESC_WITH_LENGTH(GICR_WAKER,
 		vgic_mmio_read_raz, vgic_mmio_write_wi, 4,

arch/mips/include/asm/pgtable-32.h

@@ -154,6 +154,7 @@ static inline void pmd_clear(pmd_t *pmdp)
 
 #if defined(CONFIG_XPA)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 40
 #define pte_pfn(x)		(((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT))
 static inline pte_t
 pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -169,6 +170,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #define pte_pfn(x)		((unsigned long)((x).pte_high >> 6))
 
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
@@ -183,6 +185,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 
 #else
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #ifdef CONFIG_CPU_VR41XX
 #define pte_pfn(x)		((unsigned long)((x).pte >> (PAGE_SHIFT + 2)))
 #define pfn_pte(pfn, prot)	__pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))

arch/powerpc/include/asm/book3s/32/pgtable.h

@@ -36,8 +36,10 @@ static inline bool pte_user(pte_t pte)
  */
 #ifdef CONFIG_PTE_64BIT
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*

arch/powerpc/include/asm/book3s/64/kup-radix.h

@@ -63,6 +63,8 @@
 
 #else /* !__ASSEMBLY__ */
 
+#include <linux/jump_label.h>
+
 DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
 
 #ifdef CONFIG_PPC_KUAP

arch/powerpc/include/asm/nohash/32/pgtable.h

@@ -153,8 +153,10 @@ int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
  */
 #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
 #define PTE_RPN_MASK	(~((1ULL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 36
 #else
 #define PTE_RPN_MASK	(~((1UL << PTE_RPN_SHIFT) - 1))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
 /*

arch/powerpc/kernel/exceptions-64s.S

@@ -1000,8 +1000,6 @@ TRAMP_REAL_BEGIN(system_reset_idle_wake)
  * Vectors for the FWNMI option.  Share common code.
  */
 TRAMP_REAL_BEGIN(system_reset_fwnmi)
-	/* XXX: fwnmi guest could run a nested/PR guest, so why no test?  */
-	__IKVM_REAL(system_reset)=0
 	GEN_INT_ENTRY system_reset, virt=0
 
 #endif /* CONFIG_PPC_PSERIES */
@@ -1412,6 +1410,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
  *   If none is found, do a Linux page fault. Linux page faults can happen in
  *   kernel mode due to user copy operations of course.
  *
+ *   KVM: The KVM HDSI handler may perform a load with MSR[DR]=1 in guest
+ *   MMU context, which may cause a DSI in the host, which must go to the
+ *   KVM handler. MSR[IR] is not enabled, so the real-mode handler will
+ *   always be used regardless of AIL setting.
+ *
  * - Radix MMU
  *   The hardware loads from the Linux page table directly, so a fault goes
  *   immediately to Linux page fault.
@@ -1422,10 +1425,8 @@ INT_DEFINE_BEGIN(data_access)
 	IVEC=0x300
 	IDAR=1
 	IDSISR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
 	IKVM_SKIP=1
 	IKVM_REAL=1
-#endif
 INT_DEFINE_END(data_access)
 
 EXC_REAL_BEGIN(data_access, 0x300, 0x80)
@@ -1464,6 +1465,8 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
  *   ppc64_bolted_size (first segment). The kernel handler must avoid stomping
  *   on user-handler data structures.
  *
+ *   KVM: Same as 0x300, DSLB must test for KVM guest.
+ *
  * A dedicated save area EXSLB is used (XXX: but it actually need not be
  * these days, we could use EXGEN).
  */
@@ -1472,10 +1475,8 @@ INT_DEFINE_BEGIN(data_access_slb)
 	IAREA=PACA_EXSLB
 	IRECONCILE=0
 	IDAR=1
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
 	IKVM_SKIP=1
 	IKVM_REAL=1
-#endif
 INT_DEFINE_END(data_access_slb)
 
 EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)

arch/powerpc/kvm/book3s_xive_native.c

@@ -251,6 +251,13 @@ static vm_fault_t xive_native_esb_fault(struct vm_fault *vmf)
 	}
 
 	state = &sb->irq_state[src];
+
+	/* Some sanity checking */
+	if (!state->valid) {
+		pr_devel("%s: source %lx invalid !\n", __func__, irq);
+		return VM_FAULT_SIGBUS;
+	}
+
 	kvmppc_xive_select_irq(state, &hw_num, &xd);
 
 	arch_spin_lock(&sb->lock);

arch/riscv/include/asm/pgtable-32.h

@@ -14,4 +14,6 @@
 #define PGDIR_SIZE      (_AC(1, UL) << PGDIR_SHIFT)
 #define PGDIR_MASK      (~(PGDIR_SIZE - 1))
 
+#define MAX_POSSIBLE_PHYSMEM_BITS 34
+
 #endif /* _ASM_RISCV_PGTABLE_32_H */

arch/riscv/include/asm/vdso/processor.h

@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/barrier.h>
+
 static inline void cpu_relax(void)
 {
 #ifdef __riscv_muldiv

arch/riscv/kernel/setup.c

@@ -69,6 +69,7 @@ void __init setup_arch(char **cmdline_p)
 
 	*cmdline_p = boot_command_line;
 
+	jump_label_init();
 	parse_early_param();
 
 	setup_bootmem();

arch/riscv/kernel/vdso/Makefile

@@ -44,7 +44,7 @@ SYSCFLAGS_vdso.so.dbg = $(c_flags)
 $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
-	-Wl,--build-id -Wl,--hash-style=both
+	-Wl,--build-id=sha1 -Wl,--hash-style=both
 
 # We also create a special relocatable object that should mirror the symbol
 # table and layout of the linked DSO. With ld --just-symbols we can then

arch/s390/kernel/asm-offsets.c

@@ -53,11 +53,11 @@ int main(void)
 	/* stack_frame offsets */
 	OFFSET(__SF_BACKCHAIN, stack_frame, back_chain);
 	OFFSET(__SF_GPRS, stack_frame, gprs);
-	OFFSET(__SF_EMPTY, stack_frame, empty1);
-	OFFSET(__SF_SIE_CONTROL, stack_frame, empty1[0]);
-	OFFSET(__SF_SIE_SAVEAREA, stack_frame, empty1[1]);
-	OFFSET(__SF_SIE_REASON, stack_frame, empty1[2]);
-	OFFSET(__SF_SIE_FLAGS, stack_frame, empty1[3]);
+	OFFSET(__SF_EMPTY, stack_frame, empty1[0]);
+	OFFSET(__SF_SIE_CONTROL, stack_frame, empty1[1]);
+	OFFSET(__SF_SIE_SAVEAREA, stack_frame, empty1[2]);
+	OFFSET(__SF_SIE_REASON, stack_frame, empty1[3]);
+	OFFSET(__SF_SIE_FLAGS, stack_frame, empty1[4]);
 	BLANK();
 	/* timeval/timezone offsets for use by vdso */
 	OFFSET(__VDSO_UPD_COUNT, vdso_data, tb_update_count);