NVIDIA Jetson TX2 GPIO Tutorial
Recommended basic knowledge of Embedded Systems and Linux.
Nvidia Jetson TX2 flashed with Jetpack and host PC with Ubuntu 16.04. ( JetPack 3.1 with L4T R28.1 used for this setup & experiment. )
LED's (R,G,B,O colours), suitable resistors, jumper wires, hook up wires, tactile switch ,breadboard etc.
See: https://developer.nvidia.com/embedded/jetpack for installation of Jetpack.
First, connect the LED's to GPIO pins as shown in video (3.3 V) through resistors. Ensure proper 'ground' (GND) connections.
In terminal:-
Login as root and execute the shell scripts after ensuring the appropriate connections.
Examples:- $ ./ledblink.sh or bash ledblink.sh
Vimeo: https://vimeo.com/268155121
Version 1.0
Anil Sathyan
Free to use, share or modify!! ... Copyleft!!
- "http://www.jetsonhacks.com/nvidia-jetson-tx2-j21-header-pinout/"
- "https://www.youtube.com/watch?v=D7lkth34rgM"
- "http://connecttech.com/resource-center/kdb342-using-gpio-connect-tech-jetson-tx1-carriers/"
- "http://www.jetsonhacks.com/2015/12/29/gpio-interfacing-nvidia-jetson-tx1/"
- "https://elinux.org/Jetson_TX2/"
- Nvidia Developer Forums - "https://devtalk.nvidia.com/"