Adapter PCB to replace the CUCO-Z0 Modules on newer Gosund Smart Plugs with ESP-M2 Modules. Enables to use custom firmware like Tasmota again.
The PCB features a Solder Jumper on the back side to control the pin mapping.
PCB: IO16 and JP1 have to be shorted.
Tasmota Template: {"NAME":"Gosund SP112 ESP-M2","GPIO":[288,0,289,0,2656,2720,0,0,2624,257,224,0,32,0],"FLAG":0,"BASE":18}
- Dimension: 20.3 mm * 18.7 mm
- PCB Thickness: 0.8mm
| Pos | References | Description | Value | Size | Quantity | Order Links * | Notes |
|---|---|---|---|---|---|---|---|
| 01 | U1 | ESP8285:ESP-M2 | ESP-M2 | 1 | Aliexpress | ||
| 02 | C1 | Capacitor | 100nF | 0805 | 1 | Aliexpress | |
| 03 | R1, R2, R3, R4 | Resistor | 10k | 0805 | 4 | Aliexpress |
* I have not tested all parts using this order links, no guarantee that every linked component works. Aliexpress links are affiliate links, so i will get a small commission when you order using this link. This will help me with further projects. Thanks.
All content in this repository is is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International license.