Skip to content

davidhampgonsalves/CR14-emulator-for-CatGenie-120

Repository files navigation

Arduino Based CR14 Emulator for CatGenie 120

Suppress the DRM that prevents soap cartridges from being refilled using an Arduino.

Details

The CatGenie 120 bricks itself after a fixed number of washes until a new soap cartridge is inserted. To allow it to run without a cartridge or allow cartridge refilling I reverse engineered the verification process to allow it to be emulated and suppressed using an Arduino. Further details can be found in this blog post.

Usage

Once installed the CatGenie will function as before and alert you when the cartridge needs to be refiled. Then refill the cartridge and cycle the power of the unit to reset the usage count in the Arduino.

Installation

Arduino

This project can easily be flashed to any Arduino using platform.io via: pio run. By default its setup to be used with an Arduino Uno but you can modify the platform.ini to support the other Arduino variants.

Hardware

After the code has been uploaded to the Arduino its ready to replace the CR14 RFID reader. Disassemble the CatGenie and locate the CR14 board located next to the cartridge holder as pictured bellow.

Unplug the CR14 and attach the I2C wires(white/black on my machine) to pins A4/A5 on the arduino and 5v power/ground(red/blue) to their respective pins.

This process is similar to installing a product called the CartridgeGenius which is well documented in this video.

Remember to keep the CR14 for future RFID based projects,

Alternatives

If you want a less DIY option check out the CartridgeGenius which I've read is a good solution.