Set "CONF_" CI counter to fail on 3 or more definitions

esphome/components/ade7880/sensor.py

@@ -19,6 +19,7 @@
     CONF_RESET_PIN,
     CONF_REVERSE_ACTIVE_ENERGY,
     CONF_VOLTAGE,
+    CONF_VOLTAGE_GAIN,
     DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
@@ -47,7 +48,6 @@
 CONF_IRQ0_PIN = "irq0_pin"
 CONF_IRQ1_PIN = "irq1_pin"
 CONF_POWER_GAIN = "power_gain"
-CONF_VOLTAGE_GAIN = "voltage_gain"
 
 CONF_NEUTRAL = "neutral"
 

esphome/components/ade7953_base/__init__.py

@@ -6,6 +6,7 @@
     CONF_IRQ_PIN,
     CONF_VOLTAGE,
     CONF_FREQUENCY,
+    CONF_VOLTAGE_GAIN,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_POWER,
@@ -36,7 +37,6 @@
 CONF_VOLTAGE_PGA_GAIN = "voltage_pga_gain"
 CONF_CURRENT_PGA_GAIN_A = "current_pga_gain_a"
 CONF_CURRENT_PGA_GAIN_B = "current_pga_gain_b"
-CONF_VOLTAGE_GAIN = "voltage_gain"
 CONF_CURRENT_GAIN_A = "current_gain_a"
 CONF_CURRENT_GAIN_B = "current_gain_b"
 CONF_ACTIVE_POWER_GAIN_A = "active_power_gain_a"

esphome/components/at581x/__init__.py

@@ -22,7 +22,6 @@
 
 
 CONF_SENSING_DISTANCE = "sensing_distance"
-CONF_SENSITIVITY = "sensitivity"
 CONF_POWERON_SELFCHECK_TIME = "poweron_selfcheck_time"
 CONF_PROTECT_TIME = "protect_time"
 CONF_TRIGGER_BASE = "trigger_base"

esphome/components/bl0940/sensor.py

@@ -6,6 +6,7 @@
     CONF_ENERGY,
     CONF_EXTERNAL_TEMPERATURE,
     CONF_ID,
+    CONF_INTERNAL_TEMPERATURE,
     CONF_POWER,
     CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
@@ -24,7 +25,6 @@
 
 DEPENDENCIES = ["uart"]
 
-CONF_INTERNAL_TEMPERATURE = "internal_temperature"
 
 bl0940_ns = cg.esphome_ns.namespace("bl0940")
 BL0940 = bl0940_ns.class_("BL0940", cg.PollingComponent, uart.UARTDevice)

esphome/components/bme680_bsec/__init__.py

@@ -1,15 +1,14 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import i2c, esp32
-from esphome.const import CONF_ID
+from esphome.const import CONF_ID, CONF_TEMPERATURE_OFFSET
 
 CODEOWNERS = ["@trvrnrth"]
 DEPENDENCIES = ["i2c"]
 AUTO_LOAD = ["sensor", "text_sensor"]
 MULTI_CONF = True
 
 CONF_BME680_BSEC_ID = "bme680_bsec_id"
-CONF_TEMPERATURE_OFFSET = "temperature_offset"
 CONF_IAQ_MODE = "iaq_mode"
 CONF_SUPPLY_VOLTAGE = "supply_voltage"
 CONF_SAMPLE_RATE = "sample_rate"

esphome/components/cs5460a/sensor.py

@@ -6,6 +6,7 @@
     CONF_ID,
     CONF_POWER,
     CONF_VOLTAGE,
+    CONF_VOLTAGE_GAIN,
     UNIT_VOLT,
     UNIT_AMPERE,
     UNIT_WATT,
@@ -33,7 +34,6 @@
 CONF_PHASE_OFFSET = "phase_offset"
 CONF_PGA_GAIN = "pga_gain"
 CONF_CURRENT_GAIN = "current_gain"
-CONF_VOLTAGE_GAIN = "voltage_gain"
 CONF_CURRENT_HPF = "current_hpf"
 CONF_VOLTAGE_HPF = "voltage_hpf"
 CONF_PULSE_ENERGY = "pulse_energy"

esphome/components/daikin_brc/climate.py

@@ -1,14 +1,13 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import climate_ir
-from esphome.const import CONF_ID
+from esphome.const import CONF_ID, CONF_USE_FAHRENHEIT
 
 AUTO_LOAD = ["climate_ir"]
 
 daikin_brc_ns = cg.esphome_ns.namespace("daikin_brc")
 DaikinBrcClimate = daikin_brc_ns.class_("DaikinBrcClimate", climate_ir.ClimateIR)
 
-CONF_USE_FAHRENHEIT = "use_fahrenheit"
 
 CONFIG_SCHEMA = climate_ir.CLIMATE_IR_WITH_RECEIVER_SCHEMA.extend(
     {

esphome/components/dfrobot_sen0395/__init__.py

@@ -2,7 +2,7 @@
 import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.const import CONF_ID
+from esphome.const import CONF_FACTORY_RESET, CONF_ID, CONF_SENSITIVITY
 from esphome.components import uart
 
 CODEOWNERS = ["@niklasweber"]
@@ -28,8 +28,6 @@
 CONF_DELAY_AFTER_DISAPPEAR = "delay_after_disappear"
 CONF_DETECTION_SEGMENTS = "detection_segments"
 CONF_OUTPUT_LATENCY = "output_latency"
-CONF_FACTORY_RESET = "factory_reset"
-CONF_SENSITIVITY = "sensitivity"
 
 CONFIG_SCHEMA = cv.All(
     cv.Schema(

esphome/components/emc2101/sensor/__init__.py

@@ -4,6 +4,7 @@
 from esphome.const import (
     CONF_EXTERNAL_TEMPERATURE,
     CONF_ID,
+    CONF_INTERNAL_TEMPERATURE,
     CONF_SPEED,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
@@ -16,7 +17,6 @@
 
 DEPENDENCIES = ["emc2101"]
 
-CONF_INTERNAL_TEMPERATURE = "internal_temperature"
 CONF_DUTY_CYCLE = "duty_cycle"
 
 EMC2101Sensor = emc2101_ns.class_("EMC2101Sensor", cg.PollingComponent)

esphome/components/ens160/sensor.py

@@ -2,6 +2,7 @@
 import esphome.config_validation as cv
 from esphome.components import i2c, sensor
 from esphome.const import (
+    CONF_COMPENSATION,
     CONF_ECO2,
     CONF_HUMIDITY,
     CONF_ID,
@@ -27,7 +28,6 @@
 )
 
 CONF_AQI = "aqi"
-CONF_COMPENSATION = "compensation"
 UNIT_INDEX = "index"
 
 CONFIG_SCHEMA = (

esphome/components/esp32_ble/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome import automation
-from esphome.const import CONF_ID
+from esphome.const import CONF_ENABLE_ON_BOOT, CONF_ID
 from esphome.core import CORE
 from esphome.components.esp32 import add_idf_sdkconfig_option, get_esp32_variant, const
 
@@ -11,7 +11,6 @@
 
 CONF_BLE_ID = "ble_id"
 CONF_IO_CAPABILITY = "io_capability"
-CONF_ENABLE_ON_BOOT = "enable_on_boot"
 
 NO_BLUETOOTH_VARIANTS = [const.VARIANT_ESP32S2]
 

esphome/components/esp32_camera/__init__.py

@@ -14,6 +14,7 @@
     CONF_BRIGHTNESS,
     CONF_CONTRAST,
     CONF_TRIGGER_ID,
+    CONF_VSYNC_PIN,
 )
 from esphome.core import CORE
 from esphome.components.esp32 import add_idf_sdkconfig_option
@@ -112,7 +113,6 @@
 }
 
 # pin assignment
-CONF_VSYNC_PIN = "vsync_pin"
 CONF_HREF_PIN = "href_pin"
 CONF_PIXEL_CLOCK_PIN = "pixel_clock_pin"
 CONF_EXTERNAL_CLOCK = "external_clock"

esphome/components/graphical_display_menu/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import display, font, color
-from esphome.const import CONF_ID, CONF_TRIGGER_ID
+from esphome.const import CONF_DISPLAY, CONF_ID, CONF_TRIGGER_ID
 from esphome import automation, core
 
 from esphome.components.display_menu_base import (
@@ -10,7 +10,6 @@
     display_menu_to_code,
 )
 
-CONF_DISPLAY = "display"
 CONF_FONT = "font"
 CONF_MENU_ITEM_VALUE = "menu_item_value"
 CONF_FOREGROUND_COLOR = "foreground_color"

esphome/components/haier/climate.py

@@ -6,12 +6,14 @@
 from esphome import automation
 from esphome.const import (
     CONF_BEEPER,
+    CONF_DISPLAY,
     CONF_ID,
     CONF_LEVEL,
     CONF_LOGGER,
     CONF_LOGS,
     CONF_MAX_TEMPERATURE,
     CONF_MIN_TEMPERATURE,
+    CONF_OUTDOOR_TEMPERATURE,
     CONF_PROTOCOL,
     CONF_SUPPORTED_MODES,
     CONF_SUPPORTED_PRESETS,
@@ -43,11 +45,9 @@
 CONF_ANSWER_TIMEOUT = "answer_timeout"
 CONF_CONTROL_METHOD = "control_method"
 CONF_CONTROL_PACKET_SIZE = "control_packet_size"
-CONF_DISPLAY = "display"
 CONF_HORIZONTAL_AIRFLOW = "horizontal_airflow"
 CONF_ON_ALARM_START = "on_alarm_start"
 CONF_ON_ALARM_END = "on_alarm_end"
-CONF_OUTDOOR_TEMPERATURE = "outdoor_temperature"
 CONF_VERTICAL_AIRFLOW = "vertical_airflow"
 CONF_WIFI_SIGNAL = "wifi_signal"
 

esphome/components/haier/sensor/__init__.py

@@ -2,6 +2,7 @@
 import esphome.config_validation as cv
 from esphome.components import sensor
 from esphome.const import (
+    CONF_OUTDOOR_TEMPERATURE,
     CONF_POWER,
     CONF_HUMIDITY,
     DEVICE_CLASS_CURRENT,
@@ -41,7 +42,6 @@
 CONF_OUTDOOR_DEFROST_TEMPERATURE = "outdoor_defrost_temperature"
 CONF_OUTDOOR_IN_AIR_TEMPERATURE = "outdoor_in_air_temperature"
 CONF_OUTDOOR_OUT_AIR_TEMPERATURE = "outdoor_out_air_temperature"
-CONF_OUTDOOR_TEMPERATURE = "outdoor_temperature"
 
 # Additional icons
 ICON_SNOWFLAKE_THERMOMETER = "mdi:snowflake-thermometer"

esphome/components/hmc5883l/sensor.py

@@ -6,6 +6,7 @@
     CONF_FIELD_STRENGTH_X,
     CONF_FIELD_STRENGTH_Y,
     CONF_FIELD_STRENGTH_Z,
+    CONF_HEADING,
     CONF_ID,
     CONF_OVERSAMPLING,
     CONF_RANGE,
@@ -21,7 +22,6 @@
 
 hmc5883l_ns = cg.esphome_ns.namespace("hmc5883l")
 
-CONF_HEADING = "heading"
 
 HMC5883LComponent = hmc5883l_ns.class_(
     "HMC5883LComponent", cg.PollingComponent, i2c.I2CDevice

esphome/components/inkplate6/display.py

@@ -7,6 +7,7 @@
     CONF_ID,
     CONF_LAMBDA,
     CONF_MODEL,
+    CONF_OE_PIN,
     CONF_PAGES,
     CONF_WAKEUP_PIN,
 )
@@ -29,7 +30,6 @@
 CONF_GMOD_PIN = "gmod_pin"
 CONF_GPIO0_ENABLE_PIN = "gpio0_enable_pin"
 CONF_LE_PIN = "le_pin"
-CONF_OE_PIN = "oe_pin"
 CONF_PARTIAL_UPDATING = "partial_updating"
 CONF_POWERUP_PIN = "powerup_pin"
 CONF_SPH_PIN = "sph_pin"

esphome/components/kmeteriso/sensor.py

@@ -3,14 +3,14 @@
 from esphome.components import i2c, sensor
 from esphome.const import (
     CONF_ID,
+    CONF_INTERNAL_TEMPERATURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     ENTITY_CATEGORY_DIAGNOSTIC,
 )
 
-CONF_INTERNAL_TEMPERATURE = "internal_temperature"
 DEPENDENCIES = ["i2c"]
 
 kmeteriso_ns = cg.esphome_ns.namespace("kmeteriso")

esphome/components/ld2410/binary_sensor.py

@@ -8,13 +8,13 @@
     ENTITY_CATEGORY_DIAGNOSTIC,
     ICON_MOTION_SENSOR,
     ICON_ACCOUNT,
+    CONF_HAS_TARGET,
+    CONF_HAS_MOVING_TARGET,
+    CONF_HAS_STILL_TARGET,
 )
 from . import CONF_LD2410_ID, LD2410Component
 
 DEPENDENCIES = ["ld2410"]
-CONF_HAS_TARGET = "has_target"
-CONF_HAS_MOVING_TARGET = "has_moving_target"
-CONF_HAS_STILL_TARGET = "has_still_target"
 CONF_OUT_PIN_PRESENCE_STATUS = "out_pin_presence_status"
 
 CONFIG_SCHEMA = {

esphome/components/ld2410/button/__init__.py

@@ -2,6 +2,8 @@
 from esphome.components import button
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_FACTORY_RESET,
+    CONF_RESTART,
     DEVICE_CLASS_RESTART,
     ENTITY_CATEGORY_DIAGNOSTIC,
     ENTITY_CATEGORY_CONFIG,
@@ -15,8 +17,6 @@
 ResetButton = ld2410_ns.class_("ResetButton", button.Button)
 RestartButton = ld2410_ns.class_("RestartButton", button.Button)
 
-CONF_FACTORY_RESET = "factory_reset"
-CONF_RESTART = "restart"
 CONF_QUERY_PARAMS = "query_params"
 
 CONFIG_SCHEMA = {

esphome/components/ld2420/binary_sensor/__init__.py

@@ -1,14 +1,13 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import CONF_ID, DEVICE_CLASS_OCCUPANCY
+from esphome.const import CONF_ID, DEVICE_CLASS_OCCUPANCY, CONF_HAS_TARGET
 from .. import ld2420_ns, LD2420Component, CONF_LD2420_ID
 
 LD2420BinarySensor = ld2420_ns.class_(
     "LD2420BinarySensor", binary_sensor.BinarySensor, cg.Component
 )
 
-CONF_HAS_TARGET = "has_target"
 
 CONFIG_SCHEMA = cv.All(
     cv.COMPONENT_SCHEMA.extend(

esphome/components/ld2420/button/__init__.py

@@ -2,6 +2,7 @@
 from esphome.components import button
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_FACTORY_RESET,
     DEVICE_CLASS_RESTART,
     ENTITY_CATEGORY_DIAGNOSTIC,
     ENTITY_CATEGORY_CONFIG,
@@ -19,7 +20,6 @@
 CONF_APPLY_CONFIG = "apply_config"
 CONF_REVERT_CONFIG = "revert_config"
 CONF_RESTART_MODULE = "restart_module"
-CONF_FACTORY_RESET = "factory_reset"
 
 
 CONFIG_SCHEMA = {

esphome/components/mcp3008/sensor/__init__.py

@@ -4,6 +4,7 @@
 from esphome.const import (
     CONF_ID,
     CONF_NUMBER,
+    CONF_REFERENCE_VOLTAGE,
     UNIT_VOLT,
     STATE_CLASS_MEASUREMENT,
     DEVICE_CLASS_VOLTAGE,
@@ -22,7 +23,6 @@
     voltage_sampler.VoltageSampler,
     cg.Parented.template(MCP3008),
 )
-CONF_REFERENCE_VOLTAGE = "reference_voltage"
 CONF_MCP3008_ID = "mcp3008_id"
 
 CONFIG_SCHEMA = (

esphome/components/mcp3204/__init__.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import spi
-from esphome.const import CONF_ID
+from esphome.const import CONF_ID, CONF_REFERENCE_VOLTAGE
 
 DEPENDENCIES = ["spi"]
 MULTI_CONF = True
@@ -10,7 +10,6 @@
 mcp3204_ns = cg.esphome_ns.namespace("mcp3204")
 MCP3204 = mcp3204_ns.class_("MCP3204", cg.Component, spi.SPIDevice)
 
-CONF_REFERENCE_VOLTAGE = "reference_voltage"
 
 CONFIG_SCHEMA = cv.Schema(
     {