Skip to content

ASCII text Library for the Nokia 5110 LCD ( PCD8544 controller) for the Arduino microcontroller eco-system. Nine ASCII text fonts of various sizes . Designed to be light weight, low memory footprint. Tested on Arduino , STM32 and ESP-X

License

Notifications You must be signed in to change notification settings

gavinlyonsrepo/NOKIA5110_TEXT

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

43 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Website Rss Donate

 pcb

NOKIA5110_TEXT

Table of contents

Overview

  • Name : NOKIA5110_TEXT
  • Title : Library for Nokia 5110 LCD (PCD8544 controller) for the Arduino eco-system
  • Description :
  1. Arduino eco system library, C++.
  2. Inverse, bias and contrast control.
  3. ASCII strings and character text display.
  4. Nine different ASCII text fonts.
  5. Sleep mode.
  6. Designed to be light weight, low memory footprint. see memory section.
  7. Custom characters and bitmap supported
  8. No graphics buffer to reduce memory footprint but basic graphics patterns can be created using custom characters, pixels, block patterns , lines.
  9. Hardware or software SPI interface.
  10. Print method for numerical data.
  • Author: Gavin Lyons

Tested

  • Tested on following MCUs (The file testedMCU_pinouts.txt in extras folder, shows pins used in testing)
  1. Arduino UNO & NANO v3
  2. ESP8266
  3. ESP32
  4. STM32 STM32F103C8T6 "blue pill"
  5. ATtiny85
  6. Arduino UNO R4 minima

Output

Output Screenshots, From left to right top to bottom.

  1. Custom characters + fill patterns
  2. Font 7 "Large"
  3. Half screen bitmap
  4. Font 9 "Mega"
  5. First 6 fonts (byte high), num 1-6, one font in each row block
  6. Font 8 "Huge"

 font pic 1

 font pic 2

 font pic 3

Installation

The library is included in the official Arduino library manger and the optimum way to install it is using the library manager.

Hardware

The Nokia 5110 is a basic LCD screen for lots of applications. It was originally intended to be used as a mobile phone screen. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver.

The screen is 84 X 48 pixels. The X-Axis has 84 columns. The Y_Axis(rows) the 48 pixels are divided into 6 row blocks. Each block containing one byte of pixels. 6 * 8 = 48.

Block number Pixel number Y axis
Block 0 0-7
Block 1 8-15
Block 2 16-23
Block 3 24-31
Block 4 32-39
Block 5 40-47

GPIO function on Arduino, 5 Nokia 5110 LCD lines SPI bus. The example files use Pin D2-RST <.....> D6-CLK for UNO.

MCU Nokia 5110 LCD
Digital GPIO LCD_CLK Pin 5 clock in
Digital GPIO LCD_DIN Pin 4 data in
Digital GPIO LCD_DC Pin 3 data/command
Digital GPIO LCD_CE Pin 2 chip enable
Digital GPIO LCD_RST Pin 1 reset

SPI

The PCD8544 interfaces to microcontrollers through a serial bus interface(SPI). The library originally and by default used software SPI. As of Version 2.2 it can support hardware SPI as well. Hardware SPI is much faster but two of the pins are fixed, is more difficult to port to new MCU's and includes the arduino SPI library. The file testedMCU_pinouts.txt show in extra folder shows pins used in testing of various MCU's.

To switch from the default software SPI to Hardware SPI, two steps are required:

  1. In file NOKIA5110_TEXT.h , in SPI HARDWARE SECTION, comment in: define SPIHW_ON.
  2. Use the constructor with 3 Parameters not 5. There is hardware SPI example file called NOKIA5110_HIW_HWSPI for UNO which shows this.

Pinout of a Nokia 5110 LCD.

 pinout

The LCD Vcc runs at 3.3V so you'll need to use level shifting/dropping to use with safely with 5V microcontroller.

Software

API

The API (application programming interface) documentation is at link hosted on github pages and generated by Doxygen.

API URL

Fonts

There are 9 fonts. By default only Font 1 is commented in and ready to go. So to use a non-default Font (2-9), two steps.

  1. Comment in the respective define at top of library header file NOKIA5110_TEXT_FONT_DATA.h in the FONT DEFINE SECTION.
  2. Call LCDFont function and pass it enum label of respective font.

Only include what fonts you want in order to keep program size as small as possible. Some fonts do not have lowercase letters and others are numbers only. For fonts 1-6 each character is a byte of pixels in height(Y). One pixel of empty space on each side is added by code (padding). So a 5x8 (XxY) pixel character is in reality 7x8. Each of the six rowblock is one byte height.

Total characters = (Screen Width/Character width + padding) X (Screen height/Character height).

Font table:

num name Character size Total characters Note size in bytes
1 Default 5x8 72 ------ 465
2 Thick 7x8 54 no lowercase letters 406
3 Homespun 7x8 54 ------ 658
4 Seven segment 4x8 84 ------ 364
5 Wide 8x8 48 no lowercase letters 464
6 Tiny 3x8 96 ------ 285
7 Large 12x16 21 no lowercase letters 1392
8 Huge 16x24 10 Numbers + : . only, use / for space 832
9 Mega 16x32 5 Numbers + : . only, use / for space 832

Bitmaps

Libray can display bitmaps, Data in bitmaps must be vertically addressed and can be placed in PROGMEM, see examples files.

Print

There is a print method which utilises the arduino print.h to print data types other than character strings see example file NOKIA5110_TESTS. The user can pass flash-memory based strings to print() by wrapping them with F() macro.

About

ASCII text Library for the Nokia 5110 LCD ( PCD8544 controller) for the Arduino microcontroller eco-system. Nine ASCII text fonts of various sizes . Designed to be light weight, low memory footprint. Tested on Arduino , STM32 and ESP-X

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published