Skip to content

memfault/memfault-zephyr-http-example

Repository files navigation

Memfault Zephyr Http Example

A basic HTTP-enabled Memfault example application.

Currently supporting the following boards:

  • MIMXRT1024-EVK
  • [WIP: no ethernet board support merged yet] FRDM-MCXN947

Building

Prerequisites

  1. A Zephyr build environment, used to build and flash the firmware

  2. A Memfault account and a project key

Initialize the project

# create a new zephyr workspace folder
❯ mkdir memfault-zephyr-http-example && cd memfault-zephyr-http-example
❯ git clone https://github.com/memfault/memfault-zephyr-http-example.git
❯ west init -l memfault-zephyr-http-example
❯ west update

Build

Either add this line to prj.conf:

CONFIG_MEMFAULT_PROJECT_KEY="MEMFAULT_PROJECT_KEY"

Or set it as a build argument:

❯ west build --pristine=always --board mimxrt1024_evk \
  memfault-zephyr-http-example \
  -- \
  -DCONFIG_MEMFAULT_PROJECT_KEY=\"MEMFAULT_PROJECT_KEY\"

To build for the FRDM-MCXN947 board:

❯ west build --pristine=always -b frdm_mcxn947/mcxn947/cpu0 \
  memfault-zephyr-http-example \
  -- \
  -DCONFIG_MEMFAULT_PROJECT_KEY=\"MEMFAULT_PROJECT_KEY\"

Flashing

The MIIMXRT1024-EVK board has an onboard debugger that's CMSIS-DAP compatible. You can also set a jumper to use an external debugger connecting to the SWD header (J55).

Depending on what debugger is used, the flash command will change:

# default is J-Link
❯ west flash
# to use pyocd to attach to the CMSIS-DAP debugger
❯ west flash --runner pyocd

Releases

No releases published

Packages

No packages published