Skip to content

tldr-devops/nginx-common-configuration

Repository files navigation

Nginx common useful configuration

#StandWithBelarus Voices From Belarus Stand With Ukraine

Try in Codesandbox.io

Nginx configs. Not the most powerful, productive or the best one. Just useful configs, which I would like to see in default nginx packages out of the box 😆 Bonus: fail2ban, filebeat, dockerfile and docker-compose configs for nginx :)

Motivation: I have been using nginx since 2015, and I configured it really for hundreds setups of 30+ companies and startups: sites, apps, websockets, proxies, load balancing, from a few up to 1k rps, etc... And I'm a little bit disappointed by the official nginx wiki. The last drop was this blog post in the official blog: this post doesn't provide a complete solution, half of these tips can be included into nginx configs or snippets by default, and some of the other tips, such as disabling access logging, in my opinion are the bad practice 😆

At the same time there are a lot good documentation and best practices: nginx docs, digitalocean config generator, mozilla ssl best practices, etc...

And there are also some more interesting projects and examples:

  • nginx-admins-handbook
    Huge total guide, must read for any nginx admin.
  • html5-boilerplate nginx configs
    Most popular collection of configuration snippets.
  • nginx-boilerplate
    Another one common boilerplate.
  • elasticweb/nginx-configs
    Collection of Nginx configs for most popular CMS/CMF/Frameworks based on PHP.
  • openbridge/nginx
    Docker image, but I haven't checked it properly yet, their configs require additional nginx modules and setup and it can't be just copied to the usual nginx setup. However, you can use it with docker. Also I don't agree with nginx microcache for every site, see known traps.
  • hub.docker.com/_/nginx
    Official nginx docker image and docs.
  • nginx-resources
    A collection of resources covering Nginx, Nginx + Lua, OpenResty and Tengine.

So here I'm trying to put together all (my) good patterns and knowledge, and organize it as simply as possible in comparison with complex examples above. So anyone will be able to copy this configs and get a good nginx setup out of the box :)

You can vote for my feature requests in official docker-nginx repo:

Time track:

About the Author

Hello, everyone! My name is Filipp, and I have been working with high load distribution systems and services, security, monitoring, continuous deployment and release management (DevOps domain) since 2012.

One of my passions is developing DevOps solutions and contributing to the open-source community. By sharing my knowledge and experiences, I strive to save time for both myself and others while fostering a culture of collaboration and learning.

I had to leave my home country, Belarus, due to my participation in protests against the oppressive regime of dictator Lukashenko, who maintains a close affiliation with Putin. Since then, I'm trying to build my life from zero in other countries.

If you are seeking a skilled DevOps lead or architect to enhance your project, I invite you to connect with me on LinkedIn or explore my valuable contributions on GitHub. Let's collaborate and create some cool solutions together :)

How You Can Support My Projects

There are a couple of ways you can support my projects:

  • Sending Pull Requests (PRs):
    If you come across any improvements or suggestions for my configurations or texts, feel free to send me Pull Requests (PRs) with your proposed changes. I appreciate your contributions <3

  • Making Donations:
    If you find my projects valuable and would like to support them financially, you can make a donation. Your contributions will go towards further development, maintenance, and improvement of the projects. Your support is greatly appreciated and helps to ensure the continued success of the projects.

Thank you for considering supporting my work. Your involvement and contributions make a significant difference in the growth and success of my projects.

Configs

Main configs

Almost all sections moved from main nginx.conf into conf.d directory:

  • basic.conf
    Basic settings, mime types, charset, index, timeouts, open file cache, etc...
  • cache.conf
    Fastcgi, Proxy and Uwsgi cache setup, see known traps before using ;)
  • gzip.conf
    Gzip and gzip static
  • log_format.conf
    Extended log formats
  • real_ip.conf
    Allow X-Forwarded-For header from local networks and cloudflare
  • request_id.conf
    Add X-Request-ID header into each request for tracing and debugging
  • security.conf
    Security settings and headers
  • ssl.conf
    SSL best practice from mozilla

Snippets

Templates and includes. You can also use config generator from digitalocean :)

  • corps.include.template
    Template of corps politic for multiple subdomains setup
  • default.conf
    Example of default config with nginx_status, let's encrypt check and redirect to https
  • fastcgi.include
    Include for php locations: fastcgi parameters, timeouts and cache example
  • headers.include
    Include with all headers, see known traps
  • protected_locations.include
    Include with protected locations with 'deny all'
  • proxy.include
    Include for proxy locations: proxy headers, parameters, timeouts and cache example
  • referer.include.template
    Template of referer protection for cases when you concurents use your fail2ban protection against you, see known traps
  • resolver.conf.template
    Include for dynamic dns resolving, see known traps
  • site.conf.template
    Template of common site configuration
  • static_location.include
    Include with location for static files

Dockerfile

Dockerfile example with build args, configs copying and custom envsubst template engine

Docker-compose

docker-compose.yml example for nginx

Fail2ban

You can use fail2ban for banning some bots even behind load balancer. nginx-deny action will add deny <ip>; into /etc/nginx/conf.d/banned.conf and reload nginx.

Warning: your evil competitors can use your protection like fail2ban against you, check known traps ;)

Files for copying:

fail2ban/jail.local => /etc/fail2ban/jail.local
fail2ban/action-nginx-deny.conf => /etc/fail2ban/action.d/nginx-deny.conf
fail2ban/filter-magento.conf => /etc/fail2ban/filter.d/nginx-magento.conf
fail2ban/filter-wordpress.conf => /etc/fail2ban/filter.d/nginx-wordpress.conf
fail2ban/filter-nginx-noscript.conf => /etc/fail2ban/filter.d/nginx-noscript.conf

Filebeat

Filebeat by default can't parse extended nginx access log formats, so you should override ingest json: Copy filebeat/nginx_access_ingest.json to /usr/share/filebeat/module/nginx/access/ingest/default.json

Known traps

Cache with default settings break all client specific content

If you use fastcgi, proxy or uwsgi cache with default settings like

http {

    proxy_cache_path /tmp/cache levels=1:2 keys_zone=mycache:10m max_size=10g 
                inactive=60m use_temp_path=off;

    server {
        listen 80;
        proxy_cache mycache;

        location / {
            proxy_pass http://backend1;
        }

        location /some/path {
            proxy_pass http://backend2;
            proxy_cache_valid any 1m;
            proxy_cache_min_uses 3;
            proxy_cache_bypass $cookie_nocache $arg_nocache$arg_comment;
        }
    }
}

in both locations Nginx will cache every response. So if your site has some login functionality or shopping cart or whatever, it will be mixed and most of clients will get response with content of some other clients.

In this configuration I suggest caches only as an additional tool for caching common non 200 status responses:

fastcgi_cache_valid 499 500 502 503 504 521 522 523 524 3s; # circuit breaker
fastcgi_cache_valid 404 15m; # cache Not Found for decrease loading to backend
fastcgi_cache_valid 301 308 1h; # cache Permanent Redirect for decrease loading to backend
fastcgi_cache_valid 302 307 5s; # cache Temporary Redirect for decrease loading to backend

# don't cache any other responses
fastcgi_cache_valid 200 0;
fastcgi_cache_valid any 0;

And even this one commented out in cache.conf, so you should choose yourself and enable it manually for whole site or some locations.

However, how we can safely enable cache for all responses?. And use cache config like

fastcgi_cache_valid 401 0;
fastcgi_cache_valid any 3s;
fastcgi_cache_valid 404 15m;
fastcgi_cache_valid 301 308 1h;
fastcgi_cache_valid 200 5m;
  1. The easiest
    By default, NGINX respects the Cache-Control headers from origin servers. It does not cache responses with Cache-Control set to Private, No-Cache, or No-Store or with Set-Cookie in the response header. So if your app can add Cache-Control header into every response - we are done here :) Example
Parameters of caching can also be set directly in the response header. This has higher priority than setting of caching time using the directive.
- The “X-Accel-Expires” header field sets caching time of a response in seconds. The zero value disables caching for a response. If the value starts with the @ prefix, it sets an absolute time in seconds since Epoch, up to which the response may be cached.
- If the header does not include the “X-Accel-Expires” field, parameters of caching may be set in the header fields “Expires” or “Cache-Control”.
- If the header includes the “Set-Cookie” field, such a response will not be cached.
- If the header includes the “Vary” field with the special value “*”, such a response will not be cached (1.7.7). If the header includes the “Vary” field with another value, such a response will be cached taking into account the corresponding request header fields (1.7.7).
Processing of one or more of these response header fields can be disabled using the fastcgi_ignore_headers directive.

ngx_http_fastcgi_module

  1. The most correct
    If you app can store cache in an external cache database like redis or memcached, you can use Nginx redis or memcached modules instead of nginx cache for both caching and speeding up your site.

  2. The most difficult
    You can check URI and cookies by nginx itself, but this is hard and add a mess into your configs and risk of mistakes. There is a good example in the engintron configs, but it's under GPLv2 so I can't include it into my snippets. Also there is a little easier example how to check only one cookie.

  3. Bonus: the lucky one
    For static content locations you can just enable cache without any dancing around :)

Configuration like

add_header Name1 Value1;

location / {
    add_header Name2 Value2;

After all produce only Name2 header in response. So use add_header.conf include or copy all headers manually into sections under HTTP one.

include /etc/nginx/snippets/headers.include

DNS resolving and cache in Docker, Kubernetes and other dynamic environments

By default, as NGINX starts up or reloads its configuration, it queries a DNS server to resolve backend dns records. The DNS server returns the list of backend IPs, and NGINX uses the default Round Robin algorithm to load balance requests among them. NGINX chooses the DNS server from the OS configuration file /etc/resolv.conf. This method is the least flexible way to do service discovery and has the following additional drawbacks:

  • If the domain name can’t be resolved, NGINX fails to start or reload its configuration.
  • NGINX caches the DNS records until the next restart or configuration reload, ignoring the records’ TTL values.

For dynamic dns resolving in docker, k8s and other dynamic environments, you should set the Domain Name in a Variable and add resolver directive to explicitly specify the name server as NGINX does not refer to /etc/resolv.conf in this case.

resolver 127.0.0.1 valid=10s;

server {
    location / {
        set $backend backends.example.com;
        proxy_pass http://$backend;
    }
}

You can configure and include resolver.conf snippet for manage resolver options:

include /etc/nginx/snippets/resolver.conf

Fail2ban and any other protection can be used against you

Not only that incorrectly configured protection will block valid users, even right configured protection like fail2ban, especially with botsearch-common filter, can be used for attack to you. For example, you competitors can add to their sites something like

<img src="https://{{ your site }}/admin/1.jpg">
<img src="https://{{ your site }}/phpmyadmin/1.jpg">
<img src="https://{{ your site }}/roundcube/1.jpg">

Then valid user after visit to the their site will be automatically blocked on your site 😆 You can fight with this practice using http_referer, see snippets/referer.include.template template ;) Warning: I have not tested this code yet

Default templating engine in official docker image can't proceed variables with default values like ${var:-$DEFAULT}

By default nginx in docker use GNU envsubst that can't proceed variables with default values. You can use instead a8m envsubst or stephenc envsub, first one already has a prebuilded binary for x86_64 arch, check the Dockerfile in this repo ;)

Includes like <dir>/*.conf are processed in the alphabetic order

This is important for nginx in docker as all configs are located in one dir

Errors like failed (24: Too many open files) or worker_connections exceed open file resource limit

Problem with limit of open files (ulimit -n)

You can change it

  • systemd
    Add into /etc/systemd/system/nginx.d/override.conf
[Service]
LimitNOFILE=100000
  • old init system
    Change /etc/default/nginx
ULIMIT="-n 100000"
  • docker-compose
ulimits:
  nproc: 65535
  nofile:
    soft: 100000
    hard: 100000

Maybe you should also change /etc/security/limits.conf

nginx           hard    nofile          100000
nginx           soft    nofile          100000
www-data        hard    nofile          100000
www-data        soft    nofile          100000

and /etc/sysctl.conf

fs.file-max = 394257

Nginx build info

Docker

nginx version: nginx/1.17.9
built by gcc 8.3.0 (Debian 8.3.0-6)
built with OpenSSL 1.1.1d  10 Sep 2019
TLS SNI support enabled
configure arguments: 
--prefix=/etc/nginx 
--sbin-path=/usr/sbin/nginx 
--modules-path=/usr/lib/nginx/modules 
--conf-path=/etc/nginx/nginx.conf 
--error-log-path=/var/log/nginx/error.log 
--http-log-path=/var/log/nginx/access.log 
--pid-path=/var/run/nginx.pid 
--lock-path=/var/run/nginx.lock 
--http-client-body-temp-path=/var/cache/nginx/client_temp 
--http-proxy-temp-path=/var/cache/nginx/proxy_temp 
--http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp 
--http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp 
--http-scgi-temp-path=/var/cache/nginx/scgi_temp 
--user=nginx 
--group=nginx 
--with-compat 
--with-file-aio 
--with-threads 
--with-http_addition_module 
--with-http_auth_request_module 
--with-http_dav_module 
--with-http_flv_module 
--with-http_gunzip_module 
--with-http_gzip_static_module 
--with-http_mp4_module 
--with-http_random_index_module 
--with-http_realip_module 
--with-http_secure_link_module 
--with-http_slice_module 
--with-http_ssl_module 
--with-http_stub_status_module 
--with-http_sub_module 
--with-http_v2_module 
--with-mail 
--with-mail_ssl_module 
--with-stream 
--with-stream_realip_module 
--with-stream_ssl_module 
--with-stream_ssl_preread_module 
--with-cc-opt='-g -O2 
-fdebug-prefix-map=/data/builder/debuild/nginx-1.17.9/debian/debuild-base/nginx-1.17.9=. 
-fstack-protector-strong -Wformat -Werror=format-security 
-Wp,-D_FORTIFY_SOURCE=2 -fPIC' 
--with-ld-opt='-Wl,-z,relro -Wl,-z,now -Wl,--as-needed -pie'

Ubuntu 18.04 build info

nginx version: nginx/1.14.0 (Ubuntu)
built with OpenSSL 1.1.1  11 Sep 2018
TLS SNI support enabled
configure arguments: 
--with-cc-opt='-g -O2 -fdebug-prefix-map=/build/nginx-GkiujU/nginx-1.14.0=. 
-fstack-protector-strong -Wformat -Werror=format-security 
-fPIC -Wdate-time -D_FORTIFY_SOURCE=2' 
--with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro -Wl,-z,now -fPIC' 
--prefix=/usr/share/nginx 
--conf-path=/etc/nginx/nginx.conf 
--http-log-path=/var/log/nginx/access.log 
--error-log-path=/var/log/nginx/error.log 
--lock-path=/var/lock/nginx.lock 
--pid-path=/run/nginx.pid 
--modules-path=/usr/lib/nginx/modules 
--http-client-body-temp-path=/var/lib/nginx/body 
--http-fastcgi-temp-path=/var/lib/nginx/fastcgi 
--http-proxy-temp-path=/var/lib/nginx/proxy 
--http-scgi-temp-path=/var/lib/nginx/scgi 
--http-uwsgi-temp-path=/var/lib/nginx/uwsgi 
--with-debug 
--with-pcre-jit 
--with-http_ssl_module 
--with-http_stub_status_module 
--with-http_realip_module 
--with-http_auth_request_module 
--with-http_v2_module 
--with-http_dav_module 
--with-http_slice_module 
--with-threads 
--with-http_addition_module 
--with-http_geoip_module=dynamic 
--with-http_gunzip_module 
--with-http_gzip_static_module 
--with-http_image_filter_module=dynamic 
--with-http_sub_module 
--with-http_xslt_module=dynamic 
--with-stream=dynamic 
--with-stream_ssl_module 
--with-mail=dynamic 
--with-mail_ssl_module