combine1090

Combine data from multiple dump1090 / readsb receivers (or other receivers providing beast protocol data)

Does not interfere with an already configured dump1090-fa / readsb but instead creates another instance with its own webinterface at /combine1090

Should work on the adsbexchange / piaware sd-card images.

Installation:

sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/combine1090/master/install.sh)"

or

wget -O /tmp/combine1090.sh https://raw.githubusercontent.com/wiedehopf/combine1090/master/install.sh
sudo bash /tmp/combine1090.sh

Configuration:

Edit /etc/default/combine1090 to configure which IP addresses this script should get the ADS-B data from

sudo nano /etc/default/combine1090

Ctrl-x to exit, y (yes) to save when asked. Then restart combine1090:

sudo systemctl restart combine1090

Install data redirection only

sudo bash -c "$(wget -O - https://raw.githubusercontent.com/wiedehopf/combine1090/master/redirect-only.sh)"

Configure SOURCES (source ips), PORTs (source ports) and TARGET (target ip and port) in /etc/default/combine1090. There will be no dedicated readsb started as a target for data redirection, you need to provide that target yourself. Also as there is no extra readsb there will be no extra web page or lighttpd configuration.

View the map:

Click the following URL and replace the IP address with the IP address of the Raspberry Pi you installed combine1090 on.

http://192.168.2.33/combine1090

Deinstallation:

sudo bash -c "$(wget -q -O - https://raw.githubusercontent.com/wiedehopf/combine1090/master/uninstall.sh)"

---

Questions? FAQ!

https://github.com/wiedehopf/adsb-wiki/wiki https://github.com/wiedehopf/adsb-wiki/wiki/Raspbian-Lite%3A-ADS-B-receiver